ad blue CHRYSLER 300 2015 2.G User Guide

CavityCartridge FuseMini-FuseDescription
20——Fuse — Spare
21 30 Amp Pink (6.2L Su-
percharged)
25 Amp Clear (LD
STD)
—Fuel Pump (6.2L Supercharged)
Fuel Pump (LD STD)
22—20 Amp Yellow – Police
10 Amp Red – LA
Right Spot Lamp – Police
Integrated Center Stack – LA
23—10 Amp RedFuel Door/Diagnostic Port
24—15 Amp BlueIntegrated Center Stack –
LD/LX
25—10 Amp RedTire Pressure Monitor
26—15 Amp Blue – LD/LX
25 Amp Clear – LA
30 Amp Green – LA 6.2L Super-
charged
Transmission / Electronic Shift
Module (LD/LX)
Fuel Pump (LA)
Fuel Pump (LA 6.2L Super-
charged)
516 MAINTAINING YOUR VEHICLE

CavityCartridge FuseMini-FuseDescription
27—25 Amp ClearAmplifier – If Equipped
31—25 Amp Breaker Power Seats
32—15 Amp BlueHVAC Module/Cluster
33—15 Amp BlueIgnition Switch/RF hub
Module/Steering Column
Lock-LX If Equipped
34—10 Amp RedSteering Column Module/
Clock/Spare – Police
35—5 Amp TanBattery Sensor
36—15 Amp BlueElectronic Exhaust Valve – If
Equipped
37—20 Amp YellowRadio
38—15 Amp Blue – LD/LX
20 Amp Yellow – LA
Console Power Outlet/Console
Media Hub (LD/LX)
Power Outlet Inside Arm Rest/
Console Media Hub (LA)
7
MAINTAINING YOUR VEHICLE 517

CavityCartridge FuseMini-FuseDescription
40——Fuse — Spare
41——Fuse — Spare
4230 Amp Pink—Rear Defrost
43—20 Amp YellowRear Heated Seats/Steering
Wheel Module
44—10 Amp RedPark Assist / Blind Spot / Rear
View Camera
45—15 Amp BlueCluster / Rearview Mirror /
Compass(LDLX)/Humidity Sen-
sor
46——Fuse — Spare
47—10 Amp RedAdaptive Front Lighting / Auto
High BEAM / Day Time Run-
ning Lamps- If Equipped
48—20 Amp YellowActive Suspension – SRT
49——Fuse — Spare
518 MAINTAINING YOUR VEHICLE

NOTE:On vehicles equipped with HID headlamps,
when the headlamps are turned on, there is a blue hue to
the lights. This diminishes and becomes more white after
approximately 10 seconds, as the system charges.
Standard Low Beam And High Beam Headlamp
1. Open the hood.
NOTE:Removal of the air cleaner filter housing may be
necessary prior to replacing bulbs in the headlamp
assembly on the driver side of the vehicle.
2. Reach behind the headlamp housing to access the
headlamp (outboard) bulb cap.
3. Firmly grasp the cap and rotate it counterclockwise to
unlock it.
4. Twist the headlamp bulb assembly counterclockwise,
and then pull it out of the headlamp assembly.
5. Disconnect the bulb from the wiring assembly and
install the replacement bulb.
6. Reinstall the bulb and wiring assembly into the head-
lamp assembly, and then turn it clockwise.
7. Install the headlamp bulb cap in the headlamp hous-
ing and rotate it clockwise to lock it.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.
524 MAINTAINING YOUR VEHICLE