center console CHRYSLER PACIFICA 2007 1.G User Guide

Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical
solvents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.
If the belts need cleaning, use a mild soap solution or
lukewarm water. Do not remove the belts from the car to
wash them.
Replace the belts if they appear frayed or worn or if the
buckles do not work properly.
Cleaning The Center Console Cup Holders
Removal
Grab the center of the rubber portion of the cupholder
and lift upward.
Cleaning
Soak the rubber cupholder liner in a mixture of medium
hot tap water and one teaspoon of mild liquid dish soap.
Let soak for approximately one hour. After one hour pull
the liner from the water and dip it back into the water
about six times. This will loosen any remaining debris.
Rinse the liner thoroughly under warm running water.
Shake the excess water from the liner and dry the outer
surfaces with a clean soft cloth.
Installation
Align the liner in the cupholder and press down firmly.
MAINTAINING YOUR VEHICLE 401
7

REPLACEMENT LIGHT BULBS
LIGHT BULBS — Interior Bulb Number
Center & Rear Reading Lights............... 578
Front Door Courtesy Light.................. 578
Liftgate Light(s).......................... 578
Overhead Console Reading Lights...........212–2
Visor Vanity Lights.....................V26377
NOTE:For lighted switches, see your dealer for replace-
ment instructions.
All of the interior bulbs are glass wedge base or glass
cartridge types. Aluminum base bulbs are not approved
and should not be used for replacement.LIGHT BULBS — Exterior Bulb Number
Back-up............................... 921
Rear Stop, Turn Signal....................3157
Rear Sidemarker......................... 168
Fog Light.............................9145
Front Turn Signal.......................3157A
Front Sidemarker......................... 194
Standard Headlight...................... H13
License................................ 168
BULB REPLACEMENT
Standard Quad Headlights
1. Remove the two screws securing the headlight mod-
ule to the vehicle and pull the headlight module forward
away from the vehicle, disengaging the assembly from
the lower attachment clip.
406 MAINTAINING YOUR VEHICLE

Mirrors................................ 88
Automatic Dimming..................... 88
Electric Remote........................ 90
Exterior Folding........................ 89
Heated.............................. 91
Memory............................. 127
Outside.............................. 89
Rearview............................. 88
Vanity............................... 91
Modifications/Alterations, Vehicle............. 7
Monitor, Tire Pressure System............... 308
Mopar Parts.........................368,441
Multi-Function Control Lever............... 134
Navigation System....................146,232
New Vehicle Break-In Period................ 79
Occupant Restraints....................... 40
Octane Rating, Gasoline (Fuel).............. 318Odometer............................. 184
Oil, Engine.........................369,412
Capacity............................ 411
Change Interval....................... 371
Checking............................ 369
Disposal............................ 373
Filter............................374,412
Filter Disposal........................ 373
Identification Logo..................... 372
Materials Added to..................... 373
Recommendation....................371,411
Synthetic............................ 373
Viscosity.......................372,373,411
Onboard Diagnostic System..............366,367
Opener, Garage Door (HomeLink) ........... 154
Overdrive............................. 274
Overhead Console....................... 153
Overhead Travel Information Center.......... 153
Overheating, Engine...................180,345
456 INDEX