sensor CHRYSLER PACIFICA 2017 2.G Workshop Manual

•Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
Provides alerts, visual and/or audible, to indicate objects
in your blind spot. The Blind Spot Alert feature can be
activated in “Lights” mode. When this mode is selected,
the Blind Spot Monitor (BSM) system is activated and
will only show a visual alert in the exterior mirrors.
When “Lights & Chime” mode is activated, the Blind
Spot Monitor (BSM) will show a visual alert in the
exterior mirrors as well as an audible alert when the turn
signal is on. To change the Blind Spot Alert status, press
the “Lights” or “Lights & Chime” button on the touch-
screen. NOTE:
If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result
in the BSM not operating to specification.
• Maximum Vehicle Speed
To set the maximum vehicle speed, press the “+” or “-”
button to select from 65/70/75/80/85 MPH (90/95/100/
105/110 km/h).
• SiriusXM Setup
• Channel Skip
SiriusXM can be programmed to skip channels. To
make your selection, press the “Channel Skip” button
on the touchscreen, select the channels you would
like to skip.
10
MULTIMEDIA 721

•Tilt Side Mirrors In Reverse
When this feature is selected, the exterior sideview
mirrors will tilt downward when the ignition is in the
RUN position and the transmission gear selector is in the
REVERSE position. The mirrors will move back to their
previous position when the transmission is shifted out of
REVERSE. To make your selection, press the “Tilt Side
Mirrors in Reverse” button on the touchscreen, until a
check-mark appears next to setting, indicating that the
setting had been selected.
• Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
Provides alerts, visual and/or audible, to indicate objects
in your blind spot. The Blind Spot Alert feature can be
activated in “Lights” mode. When this mode is selected,
the Blind Spot Monitor (BSM) system is activated and
will only show a visual alert in the exterior mirrors.
When “Lights & Chime” mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the
exterior mirrors as well as an audible alert when the turn
signal is on. When “Off” is selected, the Blind Spot
Monitor (BSM) system is deactivated. To change the
Blind Spot Alert status, press the “Off,” “Lights” or
“Lights & Chime” button on the touchscreen.
NOTE:
If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result
in the BSM not operating to specification.
• ParkView Backup Camera Active Guidelines
Your vehicle may be equipped with the ParkView Rear
Back Up Camera Active Guidelines that allows you to see
active guidelines over the ParkView Back up camera
display whenever the gear selector is put into REVERSE.
The image will be displayed on the radio touchscreen
10
MULTIMEDIA 729

Center Mounted Stop....................546
Cruise ....................... .256, 259, 260
Daytime Running .......................113
Exterior .......................... .377, 543
Fog ..............................113,544
Front Replacement ..................... .543
Hazard Warning Flasher ..................529
Headlights ........................... .540
Headlights On Reminder ..................112
High Beam/Low Beam Select ...............115
Intensity Control ........................118
Interior ..............................117
Lights On Reminder .....................112
Low Fuel ............................ .247
Malfunction Indicator (Check Engine) .........250
Parade Mode (Daytime Brightness) ...........120
Park ............................... .257
Passing ..............................115
Reading ..............................117 Seat Belt Reminder
..................... .232
Security Alarm ........................ .240
Service .............................. .537
Side Marker ....................... .542, 543
SmartBeams ...........................115
Tire Pressure Monitoring (TPMS) .........251, 293
Traction Control ....................... .274
Turn Signal .....................254, 377, 542
Warning (Instrument Cluster Description) ......254
Loading Vehicle ...................... .168, 504
Tires ............................... .644
Load Shed Battery Saver Mode ..................... .226
Battery Saver On ...................... .226
Electrical Load Reduction .................226
Intelligent Battery Sensor ..................226
Low Tire Pressure System ...................293
Lubrication, Body ........................ .627
Luggage Rack (Roof Rack) ...................201
12
INDEX 815