and beads. Do not exceed the maximum recommended pressure to
seat beads on rim. Use remote control inflation equipment and
inflation cage.
NOTE:
•Never inflate over 40 psi to seat beads.
•Mount radial ply tires only on rims designated by wheel manufacturer
as suitable for radial tire.
•Only specially trained persons shall mount tires.
•AIR PRESSURE
Check the pressure in your tires, including your spare, at least
monthly, and always before and during extended driving. Check tires
cold (at least 3 hours after the vehicle has been stopped and before it
is driven more than 1.6 kilometers or 1 mile). Do not reduce pressure
when tires are hot, use an accurate air pressure gauge to check
pressure and maintain it at the level recommended on the vehicle tire
placard or in the Owner ’s Manual. Under inflation produces extreme
flexing of sidewalls and builds up heat to the point that premature tire
failure may occur. Over inflation can cause the tires to be more
susceptible to impact damage. Cold tire pressures, however, should
never be higher than the limit molded on the sidewall.
•LOAD LIMITS
Never exceed the load-carrying limits molded onto the sidewall of
your tires or the maximum vehicle load limit as shown on the vehicle
tire placard, whichever is less. Overloading builds up excessive heat in
the tire and leads to early and/or sudden failure.
•HAZARDS
Avoid running over objects (e.g., chuckholes, rocks, curbs, metal, glass,
etc.) which may possibly cause internal tire damage. Continued use of
a tire that has suffered internal damage (which may not be externally
visible) can lead to dangerous tire failure. Determination of suspected
internal damage requires demounting the tire from its rim and
examination by trained tire personnel.
HANKOOK TIRES
142
