air bleeding CHRYSLER PACIFICA 2020 Vehicle Warranty

For Example Only:
Gauge reading of hot tire:................................ 32 psi (220 kPa)
If recommended cold inflation pressure is: ............. 30 psi (205 kPa)
Desired gauge reading of hot tire 30 + 4 psi = ........
34 psi (205 + 30 = 235 kPa)
Therefore: add 2 psi ....................................... (15 kPa)
BFGOODRICH TIRES
Check

cold
pressure
as
soon
as
possible,
preferably
within
24
hours.

“Bleeding”
air
from
hot
tires
could
result
in
underinflation.
Use
an

accurate
tire
gauge
to
check
pressures.
Never
allow
children
to
inflate

or
deflate
tires.
TIREPRESSURE MONITORING SYSTEM(TPMS):
Your
vehicle
may
be
equipped
with
a
Ti re
Pressure
Monitoring
System

(TPMS)
that
is
designed
to
monitor
the
pressure
of
tires
mounted
on
your

vehicle
and
sends
a
signal
to
the
driver
if
a
tire
pressure
falls
below
a

predetermined
level.
A
TPMS
should
not
replace
monthly
manual

pressure
checks
for
all
four
(4)
tires
and
the
spar e.

We
recommend
that

you
manually
monitor
and
check
tire
pressure
inflation
with
a
pressure

gauge.
Your
tires
should
have
the
recommended
pressure
listed
by
your

vehicle’s
manufacturer.
This
information
can
be
found
in
the
vehicle

owner ’s
manual
and
often
on
a
placard
located
in
the
vehicle’s
door

jamb,
inside
the
fuel
hatch,
or
on
the
glove
compartment
door.
If
you

have
a


plus
size
fitment
that
requires
a
higher
inflation
pressure,
your
tire

pressure
monitoring
system
will
require
re-calibration
to
the
new
infla-
tion
pressure.
Refer
to
your
tire
dealer/installer
of
plus
size
tires
for

proper
inflation
pressure.
We
r

ecommend
checking
air
pressure
once
each
month,
and
before
a
long

trip.
Whether
you
have
a
full-sized
or
mini-spare,
make
sure
that
it
is

properly
inflated
as
well.
If
the
TPMS
generates
improper
monitoring
or

signals
we
recommend
that
you
consult
your
owner ’s
manual
provided

with
your
vehicle
and
follow-up
with
your
vehicle’s
manufacturer.
32

For Example Only:
Gauge reading of hot tire:.............................................. 32 psi (220 kPa)
If recommended cold inflation pressure is: .................... 30 psi (205 kPa)
Desired gauge reading of hot tire 30 + 4 psi =.............34 psi (205 + 30 = 235 kPa)
Therefore: add 2 psi....................................................... (15 kPa)
Check cold pressure as soon as possible, preferably within 24 hours.
“Bleeding” air from hot tires could result in underinflation. Use an
accurate tire gauge to check pressures. Never allow children to inflate
or deflate tires.
FOR MICHELIN® PAX® SYSTEM TIRES/SELF-SUPPORTING ZERO
PRESSURE (ZP) TIRES CHECK INFLATION PRESSURES AS SOON
AS POSSIBLE FOLLOWING A LOW PRESSURE WARNING
The PAX® System requires a functioning, correctly calibrated on-board
vehicle tire pressure monitoring system (TPMS) to monitor the air
pressure and alert the driver when a low pressure event occurs. Be
certain to ensure that your vehicle’s Tire Pressure Monitoring System
(TPMS) is functioning and is correctly calibrated. Refer to your vehicle
owner ’s manual or your vehicle dealer.
Low pressure warning systems are designed to alert the driver to a low
air pressure situation in at least one tire on the vehicle. While your ZP
tires are designed to provide continued mobility in the event of an air
loss, the sooner you respond to a warning and take corrective action, the
greater the likelihood that the tire can be returned to service.
Always visually inspect your MICHELIN® PAX® System tire and
self-supporting tires and use a pressure gauge to check the air pressure
in all 4 tires following any low pressure warning. (Unless advised to do
otherwise by the manufacturer of your low pressure warning system.)
If the tire pressure is at or below 18 PSI, proceed to the nearest
Authorized PAX System Retailer for PAX tires or a participating Michelin
tire retailer for ZP tires (or a representative of your vehicle manufacturer
if advised to do so in your vehicle owner ’s manual) and have the tire
demounted and thoroughly inspected for possible internal damage.
If you are unable to see any damage to the tire, and the tire pressure is
more than 18 PSI, reinflate your tire to the proper air pressure. (See
instructions for checking pressures when tires are hot.) When tires
have cooled, check air pressure again. If any tire has lost more than
MICHELIN170