tire size CHRYSLER PACIFICA HYBRID 2020 Vehicle Warranty

•LT
(Light
Truck)
—
Metric
tire
sizing
is
based
on
US
design
standards.
The
size
designation
for
LT-Metric
tires
is
the
same
as
for
P-Metric
tires
except
for
the
letters
“LT”
that
are
molded
into
the
sidewall
preceding
the
size
designation.
Example:
LT235/85R16.
• Temporary spare tires are designed for temporary emergency use only.
Temporary high pressure compact spare tires have the letter “T” or “S”
molded into the sidewall preceding the size designation. Example:
T145/80D18 103M.
• High
flotation
tire
sizing
is
based
on
US
design
standards
and
it
begins
with
the
tire
diameter
molded
into
the


sidewall.
Example:
31x10.5
R15
LT.
Tire
Sizing
$IBSU
EXAMPLE:
Example SizeDesignation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, 
T145/80D18 103M, 31x10.5 R15LT
P =Passenger car tiresize based on US design standards, or
....blank.... = Passenger car tire based on European design standards, or
LT =Light truck tirebased on US design standards, or
Tor S =Temporary spare tireRU
31 =Overall diameter in inches (in)
215, 235,145=Section width inmillimeters (mm)
65, 85,80=Aspect ratioinpercent (%)
– Ratio of section height to section width oftire, or
10.5 =Section width ininches (in)
R =Construction code
– "R" means radial construction, or
– "D" means diagonal or bias construction
15, 16, 18 = Rim diameter in inches (in)
Service Description:
95 = Load Index
– A numerical code associated with the maximum load a tire can carry
H = Speed Symbol
– A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions
– The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, veh icle
loading, road conditions, and posted speed limits) TIRES
5

EXAMPLE:
Load Identification:
Absence of the following load identification symbols on the sidewall of th etire
indicates a Standard Load (SL) tire:
• XL
= Extra load (or reinforced) tire, or
• LL = Light load tire or
• C, D, E, F, G = Load range associated with the maximum load a tire can carry
at a specified pressure
Maximum Load–Maximum load indicates the maximum loadthistireisdesigned 
to carry
Maximum Pressure– Maximum pressure indicates the maximum permissible cold 
tire inflation pressure for this tire
TireIdentification Number (TIN)
The
TIN
may
be
found
on
one
or
both
sides
of
the
tire;
however,
the
date

code
may
only
be
on
one
side.
Ti re s
with
white
sidewalls
will
have
the

full
TIN,
including
the
date
code,
located
on
the
white
sidewall
side
of

the
tire.
Look
for
the
TIN
on
the
outboard
side
of
black
sidewall
tir
es
as

mounted
on
the
vehicle.
If
the
TIN
is
not
found
on
the
outboard
side,
then

you
will
find
it
on
the
inboard
side
of
the
tire.
EXAMPLE:
DOT MAL9ABCD 0301
DOT =Department 2fTransportation
– This symbolcertifies that thetireisin compliance with theUSDepartment
of Transportation tire safety standards and is approved for highway use
MA =Code representing the tiremanufacturing location (two digits)
L9 =Code representing the tiresize (two digits)
ABCD = Code used by the tiremanufacturer (one to four digits)
03 =Number representing the week in which thetirewas manufactured (twodigits)
–03 means the 3rd week
01 =Number representing the

year inwhich thetirewas manufactured (twodigits)
– 01 means the year 2001
– Prior to July 2000, tire manufacturers were only required to have one number
to represent the year in which the tire was manufactured. Example: 031 coul d
represent the 3rd week of 1981 or 1991
TIRES
6

Tire Terminology And Definitions
TermDefinition
B-Pillar The vehicle B-Pillar is the structural member of
the body located behind the front door.
Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire
pressure after the vehicle has not been driven
for at least three hours, or driven less than 1
mile (1.6 km) after sitting for a minimum of three
hours. Inflation pressure is measured in units of
PSI (pounds per square inch) or kPa
(kilopascals).
Maximum Inflation Pressure The maximum inflation pressure is the
maximum permissible cold tire inflation pressure
for this tire. The maximum inflation pressure is
molded into the sidewall.
Recommended Cold Tire Inflation Pressure Vehicle manufacturer’s recommended cold tire
inflation pressure as shown on the tire placard.
Tire Placard A label permanently attached to the vehicle
describing the vehicle’s loading capacity, the
original equipment tire sizes and the
recommended cold tire inflation pressures. TIRES
7

Tire And Loading Information Placard
This placard tells you important information about the:v 5IF
Oumber
of
people
that
can
be
carried
in
the
vehicle.
v 5IF
Uotal
weight
your
vehicle
can
carry.
v TIF
Uire
size
designed
for
your
vehicle.
v 5IF
Dold
tire
inflation
pressures
for
the
front,
rear,
and
spare
tires.
Tire And Loading Information Placard
TIRES
Loading
The
vehicle
maximum
load
on
the
tire
must
not
exceed
the
load
carrying

capacity
of
the
tire
on
your
vehicle.
Yo u
will
not
exceed
the
tire’s
load

carrying
capacity
if
you
adhere
to
the
loading
conditions,
tire
size,
and

cold
tire
inflation
pressures
specified
on
the
Ti re
and
Loading
Informa-
tion
placard
in
“Vehicle
Loading”
in
the
“Starting

And
Operating”

section
of
your
Owner ’s
Manual.
NOTE:
Under
a
maximum
loaded
vehicle
condition,
gross
axle
weight
ratings

(GAWRs)
for
the
front
and
rear
axles
must
not
be
exceeded.
For
further
information
on
GAWRs,
vehicle
loading,
and
trailer
towing,

refer
to
“Vehicle
Loading”
in
the
“Starting
And
Operating”
section

of
your
Owner ’s
Manual.
To
determine
the
maximum
loading


conditions
of
your
vehicle,
locate
the

statement
“The
combined
weight
of
occupants
and
cargo
should
never
9

exceed
XXX
kg
or
XXX
lbs”
on
the
Ti re
and
Loading
Information
placard.

The
combined
weight
of
occupants,
cargo/luggage
and
trailer
tongue

weight
(if
applicable)
should
never
exceed
the
weight
referenced
here.
Steps
For
Determining
Correct
Load
Limit

û
W
ü Locate
the
statement
“The
combined
weight
of
occupants
and
cargo
should
never
exceed
XXX
kg
or
XXX
lbs.”
on
your
vehicle’s
placard.

û
X
ü Determine
the
combined
weight
of
the
driver
and
passengers
that
will
be
riding
in
your
vehicle.

û
Y
ü Subtract
the
combined
weight
of
the
driver
and
passengers
from
XXX
kg
or
XXX
lbs.

û
Z
ü The
resulting
figure
equals
the
available
amount
of
cargo
and
luggage
load
capacity
.
For
example,
if
“XXX”


amount
equals
1400
lbs
and
there
will
be
five
150
lb
passengers
in
your
vehicle,
the
amount
of
available
cargo
and
luggage
load
capacity
is
650
lbs.
(1400-750
(5x150)
=
650
lbs.

û
[
ü Determine
the
combined
weight
of
luggage
and
cargo
being
loaded
on
the
vehicle.
That
weight
may
not
safely
exceed
the
available
cargo
and
luggage
load
capacity
calculated
in
Step
4.

û
\
ü If
your
vehicle
will
be
towing
a
trailer,
load
from
your
trailer


will
be
transferred
to
your
vehicle.
Consult
this
manual
to
determine
how
this
reduces
the
available
cargo
and
luggage
load
capacity
of
your
vehicle.
Metric
Example
For
Load
Limit
For
example,
if
“XXX”
amount
equals
635
kg
and
there
will
be
five
68
kg

passengers
in
your
vehicle,
the
amount
of
available
cargo
and
luggage

load
capacity
is
295
kg
(635-340
(5x68)
=
295
kg)
as
shown
in
step
4.
NOTE: • If
your
vehicle
will
be
towing
a
trailer,
UIF
load
from
your

trailer
will
be
transferred
to
your
vehicle.
The
following
table
shows
examples
on
how
to
calculate
total
load,
cargo/luggage,
and
towing
capacities
of
your
vehicle
with
varying
seating
configurations
and
number
and
size
of
occupants.
This
table
is
for
illustration
purposes
only
and
may
not
be
accurate
for
the
seating
and
load
carry
capacity
of
your
vehicle.
• For
the
following
example,
the
combined
weight
of
occupants
and
cargo
should
never
exceed
865


lbs
(392
kg).
TIRES
10

Life Of Tire
The service life of a tire is dependent upon varying factors including, but
not limited to:
•˜ž›1 riving
style
ï
• Tire pressure - Improper cold tire inflation pressures can cause uneven
wear patterns to develop across the tire tread. These abnormal wear
patterns will reduce tread life, resulting in the need for earlier tire
replacement.
• ‘Ž1 –’•Žœ
driven.
• Performance tires, tires with a speed rating of V or higher, and
Summer tires typically have a reduced tread life. Rotation of these tires
per the vehicle scheduled maintenance is highly recommended.
WARNING!
Tires and the spare tire should be replaced after six years, regardless
of the remaining tread. Failure to follow this warning can result in
sudden tire failure. You could lose control and have a collision
resulting in serious injury or death.
TIRES
Keep
dismounted
tires
in
a
cool,
dry
place
with
as
little
exposure
to
light

as
possible.
Protect
tires
from
contact
with
oil,
grease,
and
gasoline.
Replacement Tires
The
tires
on
your
new
vehicle
provide
a
balance
of
many
characteristics.

They
should
be
inspected
regularly
for
wear
and
correct
cold
tire

inflation
pressures.
The
manufacturer
strongly
recommends
that
you
use

tires
equivalent
to
the
originals
in
size,
quality
and
performance
when

replacement
is
needed.
Refer
to
the
paragraph
on
“Tread
Wear
Indica-
tors”
in
this
section


UP
EFUFSNJOF
JG
ZPVS
UJSFT
BSF
XPSO.
Refer
to
the
Tire
and

Loading
Information
placard
or
the
Vehicle
Certification
Label
for
the

size
designation
of
your
tire.
The
Load
Index
and
Speed
Symbol
for

your
tire
will
be
found
on
the
original
equipment
tire
sidewall.
See
the
Tire
Sizing
Chart
example
found
in
the
“Tire
Safety
Information”

section
of
this
manual
for
more
information
relating
to
the
Load
Index

and
Speed
Symbol
of
a
tire.
It
is
recommended
to
replace
the
two
front
tires
or
two
rear
tires
as
a
pair.

Replacing
just
one
tire


can
seriously
affect
your
vehicle’s
handling.
If
you
17

ever replace a wheel, make sure that the wheel’s specifications match
those of the original wheels.
It is recommended you contact an authorized tire dealer or original
equipment dealer with any questions you may have on tire specifications
or capability. Failure to use equivalent replacement tires may adversely
affect the safety, handling, and ride of your vehicle.
WARNING!
•Do not use a tire, wheel size, load rating, or speed rating other than
that specified for your vehicle. Some combinations of unapproved
tires and wheels may change suspension dimensions and perfor-
mance characteristics, resulting in changes to steering, handling,
and braking of your vehicle. This can cause unpredictable han-
dling and stress to steering and suspension components. You could
lose control and have a collision resulting in serious injury or
death. Use only the tire and wheel sizes with load ratings approved
for your vehicle.
• Never use a tire with a smaller load index or capacity, other than
what was originally equipped on your vehicle. Using a tire with a
smaller load index could result in tire overloading and failure. You
could lose control and have a collision.
• Failure to equip your vehicle with tires having adequate speed
capability can result in sudden tire failure and loss of vehicle
control.
CAUTION!
Replacing original tires with tires of a different size may result in
false speedometer and odometer readings.
TIRES
18

TireTy p e s
All Season Tires —IfEquipped
All
œeason
tires
provide
traction
for
all
seasons
(Spring,
Summer,
"VUVNO,

and
Winter).
Traction
levels
may
vary
between
different
all
season

tires.
All
season
tires
can
be
identified
by
the
M+S,
M&S,
M/S
or
MS

designation
on
the
tire
sidewall.
Use
all
season
tires
only
in
sets
of
four;

failure
to
do
so
may
adversely
affect
the
safety
and
handling
of
your

vehicle.
Summer Or Three Season Tires —IfEquipped
Summer
tires
provide
traction
in
both
wet
and
dry
conditions,
and
are

not
intended
to
be
driven
in
snow
or
on
ice.
If
your
vehicle
is
equipped

with
Summer
tires,
be
aware
these
tires
are
not
designed
for
Winter
or

cold
driving
conditions.
Install
inter
tires
on
your
vehicle

when
ambient
temperatures
are
less
than
40°F
(5°C)
or
if
roads
are

covered
with
ice
or
snow.
For
more
information,
contact


an
authorized

dealer.
Summer
tires
do
not
contain
the
all
season
designation
or
mountain/
snowflake
symbol
on
the
tire
sidewall.
Use
ummer
tires
only
in
sets

of
four;
failure
to
do
so
may
adversely
affect
the
safety
and
handling
of

your
vehicle.
WARNING!
Do
not
use
ummer
tires
in
snow/ice
conditions.
Yo u
could

lose
vehicle
control,
resulting
in
severe
injury
or
death.
Driving
too

fast
for
conditions
also
creates
the
possibility
of
loss
of
vehicle

control.
Snow Tires
Some
areas
of
the
country
require
the
use
of
snow
tires
during
the
inter.

Snow
tires
can
be
identified
by
a
“mountain/snowflake”
symbol
on
the

tire
sidewall.
If you need snow tires, select tires equivalent in size
and type to the original equipment tires. Use snow
tires only in sets of four; failure to do so may adversely
affect the safety and handling of your vehicle.
Snow tires generally have lower speed ratings than
what was originally equipped with your vehicle and
should not be operated at sustained speeds over 75 mph (120 km/h). For
speeds above 75 mph (120 km/h) refer to original equipment or an
TIRES
19

authorized
tire
dealer
for
recommended
safe
operating
speeds,
loading

and
cold
tire
inflation
pressures.
While
studded
tires
improve
performance
on
ice,
skid
and
traction

capability
on
wet
or
dry
surfaces
may
be
poorer
than
that
of
non-studded

tires.
Some
states
prohibit
studded
tires;
therefore,
local
laws
should
be

checked
before
using
these
tire
types.
Spare Tires—IfEquipped
NOTE:

For
vehicles
equipped
with
Tire
Service
Kit
instead
of
a
spare
tire,
please

refer
to
“Tire
Service
Kit”
in
“In
Case
Of
Emergency”
in
your

Owner ’s
Manual
for
further
information.
CAUTION!
Because of the reduced ground clearance, do not take your vehicle
through an automatic car wash with a compact or limited use
temporary spare installed. Damage to the vehicle may result.
TIRES
SpareTireMatching Original Equipped Tire And Wheel —If
Equipped
Your
vehicle
may
be
equipped
with
a
spare
tire
and
wheel
equivalent
in

look
and
function
to
the
original
equipment
tire
and
wheel
found
on
the

front
or
rear
axle
of
your
vehicle.
This
spare
tire
may
be
used
in
the
tire

rotation
for
your
vehicle.
If
your
vehicle
has
this
option,
refer
to
an

authorized
tire
dealer
for
the
recommended
tire
rotation
pattern.
Compact Spare Tire—IfEquipped
The
compact
spare
is
for
temporary
emergency
use
only.
Yo u
can
identify

if
your
vehicle
is
equipped
with
a
compact
spare
by
looking
at
the
spare

tire
description
on
the
Tire
and
Loading
Information
Placard
located
on

the
driver ’s
side
#QJMMBS

UIF
SFBS
FEHF
PG
UIF
ESJWFST
TJEF
EPPS
or
on
the

sidewall
of
the
tire.
Compact
spare
tire
descriptions
begin
with
the

letter
“T”
or
“S”
preceding
the
size
designation.
Example:
T145/80D18

103M.
T,
S
=
Temporary
Spare
Tire
Since
this
tire


has
limited
tread
life,
the
original
equipment
tire
should
be

repaired
(or
replaced)
and
reinstalled
on
your
vehicle
at
the
first

opportunity.
Do
not
install
a
wheel
cover
or
attempt
to
mount
a
conventional
tire
on

the
compact
spare
wheel,
since
the
wheel
is
designed
specifically
for
the
20

Full Size Spare — If Equipped
The full size spare is for temporary emergency use only. This tire may
look like the originally equipped tire on the front or rear axle of your
vehicle, but it is not. This spare tire may have limited tread life. When the
tread is worn to the tread wear indicators, the temporary use full size
spare tire needs to be replaced. Since it is not the same as your original
equipment tire, replace (or repair) the original equipment tire and
reinstall on the vehicle at the first opportunity.
Limited Use Spare — If Equipped
The limited use spare tire is for temporary emergency use only. This tire
is identified by a label located on the limited use spare wheel. This label
contains the driving limitations for this spare. This tire may look like the
original equipped tire on the front or rear axle of your vehicle, but it is
not. Installation of this limited use spare tire affects vehicle handling.
Since it is not the same as your original equipment tire, replace (or repair)
the original equipment tire and reinstall on the vehicle at the first
opportunity.
WARNING!
Limited use spares are for emergency use only. Installation of this
limited use spare tire affects vehicle handling. With this tire, do not
drive more than the speed listed on the limited use spare wheel.
Keep inflated to the cold tire inflation pressures listed on your Tire
and Loading Information Placard located on the driver ’s side B-Pillar
or the rear edge of the driver ’s side door. Replace (or repair) the
original equipment tire at the first opportunity and reinstall it on
your vehicle. Failure to do so could result in loss of vehicle control.
TIRES22