brake rotor CHRYSLER VOYAGER 2001 Service Manual

CHRYSLER VOYAGER 2001 Service Manual VOYAGER 2001 CHRYSLER CHRYSLER https://www.carmanualsonline.info/img/25/56872/w960_56872-0.png CHRYSLER VOYAGER 2001 Service Manual

Page 1506 of 4284

CHRYSLER VOYAGER 2001  Service Manual GROUND CLEARANCE
CAUTION: If vehicle is towed with wheels removed,
install lug nuts to retain brake drums or rotors.
A towed vehicle should be raised until the lifted
wheels are a minimum 100 mm (4 in

Page 1515 of 4284

CHRYSLER VOYAGER 2001  Service Manual RECOMMENDED TOWING EQUIPMENT
To avoid damage to bumper fascia and air dams
use:
²FWD vehicles, use a flat bed towing device or
wheel lift is recommended (Fig. 9).
²AWD vehicles, a flat bed towing de

Page 1520 of 4284

CHRYSLER VOYAGER 2001  Service Manual BUSHINGS
REMOVAL - STABILIZER BAR CUSHION
(1) Raise Vehicle. Refer to Hoisting in Lubrication
and Maintenance.
(2) Remove the 2 bolts fastening the emission leak
detection pump to the cradle crossmemb

Page 1521 of 4284

CHRYSLER VOYAGER 2001  Service Manual DIAGNOSIS AND TESTING - HUB AND
BEARING (FRONT)
The condition of the front hub and bearing assem-
bly is diagnosed using the inspection and testing pro-
cedure detailed below.
The bearing contained in

Page 1522 of 4284

CHRYSLER VOYAGER 2001  Service Manual INSTALLATION - HUB AND BEARING
CAUTION: Hub and bearing assembly mounting
surfaces on the steering knuckle and stub axle (Fig.
7) must be smooth and completely free of foreign
material or nicks prior

Page 1523 of 4284

CHRYSLER VOYAGER 2001  Service Manual REMOVAL - STEERING KNUCKLE
(1) Raise vehicle on jack stands or centered on a
frame contact type hoist. Refer to Hoisting in Lubri-
cation And Maintenance.
(2) Remove the wheel and tire assembly from t

Page 1526 of 4284

CHRYSLER VOYAGER 2001  Service Manual (5) Install steering knuckle in clevis bracket of
strut damper assembly. Install the strut clevis-to-
steering knuckle attaching bolts. Tighten both bolts
to a torque of 81 N´m (60 ft. lbs.) plus an

Page 1531 of 4284

CHRYSLER VOYAGER 2001  Service Manual reached. This will properly space bushing on the
stem in relation to the flange.
(6) Back off the forcing screw and remove tool.
(7) Install lower control arm on vehicle. (Refer to 2
- SUSPENSION/FRON

Page 1546 of 4284

CHRYSLER VOYAGER 2001  Service Manual body, Install the mounting bolts (Fig. 3). Tighten the
four mounting bolts to 61 N´m (45 ft. lbs.) torque.
(9) Raise or lower the jack until shock absorber
lower eye aligns with threads in axle housi

Page 1547 of 4284

CHRYSLER VOYAGER 2001  Service Manual unload the bearings and change the noise level.
When bearing damage is slight, the noise is usually
not noticeable at speeds above 48 km/h (30 mph).
REMOVAL - HUB AND BEARING
FRONT-WHEEL-DRIVE VEHICLE
Page:   1-10 11-20 21-30 31-40 41-50 ... 60 next >