ESP inoperative CHRYSLER VOYAGER 2020 Owners Manual
[x] Cancel search | Manufacturer: CHRYSLER, Model Year: 2020, Model line: VOYAGER, Model: CHRYSLER VOYAGER 2020Pages: 516, PDF Size: 28.69 MB
Page 151 of 516

GETTING TO KNOW YOUR INSTRUMENT PANEL149
Turn Signal Indicator Lights 
 When the left or right turn signal is 
activated, the turn signal indicator will 
flash independently and the 
corresponding exterior turn signal 
lamps will flash. Turn signals can be activated 
when the multifunction lever is moved down 
(left) or up (right).
NOTE:
A continuous chime will sound if the vehicle is 
driven more than 1 mile (1.6 km) with either 
turn signal on.
Check for an inoperative outside light bulb if 
either indicator flashes at a rapid rate.
Blue Indicator Lights
High Beam Indicator Light
 This indicator light will illuminate to 
indicate that the high beam 
headlights are on. With the low beams 
activated, push the multifunction 
lever forward (toward the front of the vehicle) to 
turn on the high beams. Pull the multifunction 
lever rearward (toward the rear of the vehicle) to 
turn off the high beams. If the high beams are 
off, pull the lever toward you for a temporary 
high beam on, “flash to pass” scenario.
White Indicator Lights
Adaptive Cruise Control (ACC) Ready Light — 
If Equipped 
 This indicator light will illuminate 
when the vehicle equipped with 
Adaptive Cruise Control (ACC) has 
been turned on but not set.
Refer to “Adaptive Cruise Control (ACC) — If 
Equipped” in “Starting And Operating” for 
further information.
Cruise Control Ready Indicator  
 This indicator light will illuminate 
when the cruise control is ready, but 
not set. Refer to “Speed Control” in 
“Starting And Operating” for further 
information.
LaneSense Indicator Light — If Equipped
 When the LaneSense system is ON, 
but not armed, the LaneSense 
indicator light illuminates solid white. 
This occurs when only left, right, or 
neither lane line has been detected. If a single 
lane line is detected, the system is ready to 
provide only visual warnings if an unintentional 
lane departure occurs on the detected lane line.
Refer to “LaneSense — If Equipped" in “Starting 
And Operating” for further information.
Set Speed Display
 The Set Speed Display indicator light 
indicates the set speed for the Speed 
Control and Adaptive Cruise Control 
(ACC) settings.
3
20_RU_OM_EN_US_t.book  Page 149