ABS CHRYSLER VOYAGER 2020 Vehicle Warranty

EXAMPLE:
Load Identification:
Absence of the following load identification symbols on the sidewall of th etire
indicates a Standard Load (SL) tire:
• XL
= Extra load (or reinforced) tire, or
• LL = Light load tire or
• C, D, E, F, G = Load range associated with the maximum load a tire can carry
at a specified pressure
Maximum Load–Maximum load indicates the maximum loadthistireisdesigned 
to carry
Maximum Pressure– Maximum pressure indicates the maximum permissible cold 
tire inflation pressure for this tire
TireIdentification Number (TIN)
The
TIN
may
be
found
on
one
or
both
sides
of
the
tire;
however,
the
date

code
may
only
be
on
one
side.
Ti re s
with
white
sidewalls
will
have
the

full
TIN,
including
the
date
code,
located
on
the
white
sidewall
side
of

the
tire.
Look
for
the
TIN
on
the
outboard
side
of
black
sidewall
tir
es
as

mounted
on
the
vehicle.
If
the
TIN
is
not
found
on
the
outboard
side,
then

you
will
find
it
on
the
inboard
side
of
the
tire.
EXAMPLE:
DOT MAL9ABCD 0301
DOT =Department 2fTransportation
– This symbolcertifies that thetireisin compliance with theUSDepartment
of Transportation tire safety standards and is approved for highway use
MA =Code representing the tiremanufacturing location (two digits)
L9 =Code representing the tiresize (two digits)
ABCD = Code used by the tiremanufacturer (one to four digits)
03 =Number representing the week in which thetirewas manufactured (twodigits)
–03 means the 3rd week
01 =Number representing the

year inwhich thetirewas manufactured (twodigits)
– 01 means the year 2001
– Prior to July 2000, tire manufacturers were only required to have one number
to represent the year in which the tire was manufactured. Example: 031 coul d
represent the 3rd week of 1981 or 1991
TIRES
6

RFT (Run-Flat Technology) Tires:In addition to the above, there are
recommendations specific to the repair of RFT tires; see “RFT Tires with
Run-Flat Technology” in this manual.
TIRE MOUNTING AND OTHER SERVICING
WARNING!
Removing and replacing tires on wheels can be dangerous.
Attempting to mount tires with improper tools or procedures may
result in a tire explosion causing serious personal injury or death.
This is only a job for a qualified tire service professional. Never
perform tire service procedures without proper training, tools, and
equipment.
This manual is not intended to provide proper training or service
procedures for tire mounting, demounting, balancing, rotation, or
repair. Please leave these tasks to qualified tire service professionals.
For your safety and that of others:
• Always stand well clear of any tire mounting operation. This is
especially important when the service operator inflates the tire. If the
tire has been improperly mounted, it may burst with explosive force
causing serious personal injury or death.
• Tires must match the width and diameter requirements of the wheels.
For example, 16 inch diameter tires must only be mounted to 16 inch
diameter wheels. Radial tires must only be mounted to wheels
approved for radial tires.
• Wheels must be free of cracks, dents, chips, and rust. Tires must be free
of bead damage, cuts, and punctures.
• Never inflate a tire beyond 40 psi (275 kPa) to seat the beads. Be
absolutely certain beads are fully seated before adjusting inflation
pressure to the level recommended for vehicle operation.
• Never put flammable substances in tire/wheel assemblies at any time.
Never put any flammable substance into a tire/wheel assembly and
attempt to ignite to seat the beads.
• Always stand well away from the work area when tires are being spin
balanced either on or off the vehicle.
BRIDGESTONE® - FIRESTONE®
63

2. If Hankook Temporary Tire fails as a result of defect in materialsand/or workmanship during the first 50% of usable treadwear, the tire
will be replaced with a new, comparable tire at no charge including
mounting charge. No adjustment will be made for tires that are worn
more than 50%.
WHAT IS NOT COVERED BY THE WARRANTY
NON ADJUSTABLE CONDITIONS
1. Irregular wear or tire damage due to:
•Road hazards such as punctures, cuts, snags, scuffs, carcass bruises
or impact breaks.
• Fire,
wreck
or
collision
ä
• Improper inflation, overloading, high speed spinning, improper
mounting or demounting, running flat, off-road use, racing, vandal-
ism, willful damage or abuse.
• Misalignment, wheel imbalance, defective brakes or shock absorber,
use of tire chains.
• Any tire which has failed as a result of adding materials (e.g. tire
fillers, sealant, or balancing substances).
• Mechanical failure or design of vehicle.
2. Tires fitted to anything other than the original vehicles.
3. Tire worn beyond tread wear indicator (2/32 nds inch or 1.6 mm tread remaining).
4. Tire presented by other than the actual owner-user.
5. Tire branded “NA” (meaning no adjustment) or “blem” (meaning blemished).
6. Loss of time inconvenience, loss of use of the vehicle or consequential damage.
7. Ride disturbance caused by damaged wheels or after free-replacement conditions.
8. Tire with weather cracking which was purchased more than four years prior to presentation for adjustment.
HANKOOK TIRES
140

•Tires improperly repaired or with repairs not conforming to Tire and
Rubber Association of Canada standards, or with section repairs, or
with a self-vulcanizing plug only or patch only.
• Tires which have been recapped, or retreaded, or regrooved.
• Tires used in racing or other competitive events.
• Tires removed in multiples when only one tire can be claimed, or is
suspect of a claim.
• Ride related anomalies after the first 2/32” of treadwear.
• Tires which become unserviceable because of tire operation in excess of
tire/wheel manufacturers’ specifications and recommendations, in-
cluding spinning.
• Tires which become unserviceable because of a mechanical irregularity
in the vehicle such as misalignment, defective brakes, defective shock
absorbers or struts, or improper rims.
• Tires damaged by fire, chemical corrosion, vandalism, wrecks, chains,
theft, run while flat, under inflated, over inflated or abused during
servicing.
• Tires affected by flat spotting caused by improper transport or storage.
• Tires which became unserviceable because of road hazard injuries (e.g.,
nails, glass, metal objects) or other penetrations or snags, bruises or
impact damage, except for those Run Flat lines/sizes specifically
covered by the Pirelli Road Hazard Policy.
• Tires with weather / ozone cracking which were purchased more than
four years prior to presentation for adjustment. (If no proof of
purchase date is available, the warranty will be four years from the
DOT date).
• Summer tires that developed surface cracks due to use in low ambient
temperatures. These include P Zero Silver, P Zero Trofeo, P Zero Corsa
System, P Zero, P Zero Rosso™, P Zero Nero, Cinturato P1, Cinturato
P7, Scorpion Zero™ and Scorpion Verde.
PIRELLI TIRES
203

WARNING!(Continued)
•Exceeding the maximum bead seating pressure of 40 psi. Be
absolutely certain beads are fully seated before adjusting the
inflation pressure to the level recommended for vehicle operation.
Never
put
flammable
substances
in
the
tire/wheel
assemblies
at
any
time.
Never
put
any
flammable
substance
into
a
tire/wheel
assembly
and
attempt
to
ignite
it
in
order
to
seat
the
beads.
TIRE MIXING
CAUTION!
Driving your vehicle with an improper mix of tire sizes,
constructions, and speed ratings can be dangerous. Your car ’s
handling characteristics can be adversely affected. You could have
an accident resulting in serious personal injury or death. Consult
your vehicle Owner ’s Manual or an authorized Toyo Tires dealer for
proper tire replacement.
• Toyo Tires recommends that all four tires be of the same size, speed
rating, and construction (radial or non-radial). In some cases the
vehicle manufacturer may require different sized tires for the front or
rear axles. Never mix P-metric or European Metric passenger tires with
LT-metric tires on the same vehicle.
• Match tire size designations in pairs on an axle, except during the
temporary use of a spare tire.
• If two radial tires and two non-radial tires are used on a vehicle, put
the radials on the rear axle. If radial and non-radial tires are used on a
vehicle equipped with dual rear tires, the radial tires may be used on
either axle.
SPEED-RATED TIRE
•If the vehicle Tire Information Placard and/or the vehicle Owner ’s
Manual specifies speed-rated tires, the replacement tires must have the
same or higher speed rating to maintain vehicle speed capability.
• If a replacement tire has a lower speed capability than that specified by
the vehicle manufacturer, the vehicle’s speed must be restricted to that
TOYO TIRES – LIMITED WARRANTY
236
•