Motor Citroen BERLINGO 2004 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine 468
ELECTRICAL
SYSTEM
Vehicles/models Gearboxes Class Climate
3C
2.0i 16VT
4F
GF
4C
XSARA 1.9 D M T
5F
6GF
4C
2.0 HDiT
6F
GF
STARTER MOTORS
XSARA

Downloaded from www.Manualslib.com manuals search engine 469
ELECTRICAL
SYSTEM
Vehicles/models Gearboxes Class Climate
5C
2.0 HDi M T
6F
GF
6C
XSARA A T
6+F
GF
4C
1.4 HDi M T
5F
GF
STARTER MOTORS
XSARA

Downloaded from www.Manualslib.com manuals search engine 470
ELECTRICAL
SYSTEM
Vehicles/models Gearboxes Class Climate
1C
T
2F
3GF
1C
1.6iT
3F
XSARA PICASSOMGF
2C
T
3F
GF
C
1.8i 16V3T
F
4GF
STARTER MOTORS
XSARA PICASSO

Downloaded from www.Manualslib.com manuals search engine 471
ELECTRICAL
SYSTEM
Vehicles/models Gearboxes Class Climate
3C
2.0i 16V MA T
4F
GF
5C
XSARA PICASSO 1.6 HDi 16VT
6F
MGF
4C
2.0 HDiT
6F
GF
STARTER MOTORS
XSARA PICASSO

Downloaded from www.Manualslib.com manuals search engine ALTERNATORS
Abbreviations and definitions
ALL TYPES
Coding of climates is as follows:
CLIMATES:
C
: Hot (45°C/37°C).
T: Temperate (37°C/17°C).
F: Cold (17°C/25°C).
GF : Very cold (<25°C).
Meaning of abbreviations:
BV
: Gearbox.BVM: Manual gearbox.BVA: Automatic gearbox.BVMP: Piloted manual gearbox.NON REFRI: Without air conditioning.REFRI: With air conditioning.DA: Powerassisted steering.GEP: Electropump motor.DP: Double lug.3 Pts: 3Point.NC: Not marketed.TT: All Types.N: Level.SOP: Without Option.TOP: All Options.L.C.: Heated rear screen.DAG:Left hand drive.DAD:Right hand drive.
472
ELECTRICAL
SYSTEM

Downloaded from www.Manualslib.com manuals search engine 498
AIRCONAIRCON
AIR CONDITIONING SYSTEM R 134.a
Testing procedure
Conditions inside the vehicle.
Positions of the air conditioning controls:
Maximum cold.
Maximum blower power.
Air distribution on
«ventilation»with the air vents open.
Position the air inlet flap to outside air.
WARNING:For RFTA (1), disconnect the air inlet motor connector, first
ensuring that it is in the outside air position.
(1) RFTA= Fully automatic air conditioning.
Test procedure.When all these conditions are met, proceed in the following order:
Measure the temperature in the workshop approx. one metre in front of
the vehicle’s air inlet grille.
Start the engine
(without the air conditioning, or the blower, operating)and wait for the cooling fan slow speed to trigger (should the engine tem
perature not rise sufficiently, it is permissable to increase the engine
speed to 2000 rpm)
.
Once it is sufficiently hot in the engine compartment, return the engine
to idle and commence the test.Switch on the air conditioning and adjust the engine speed to
2500 rpm.
In an ambient temperature of 40°C, the engine speed will be brought
down to 2000 rpm, in order for the pressure safety threshold to cut off the
compressor.
For further temperatures/pressures: see Tables and Graphs on following
pages
221, 222 and 226.
After
3 minutesof operation, note down the following 3 parameters:
The temperature of the blown air coming out of the 2 central air vents
(take the average).
The high pressure, via the intermediary of the clickfit union (at the
pressure reducer inlet).
The low pressure, via the intermediary of the clickfit union (at the pressure
reducer outlet).NOTE:The low and high pressures are absolute pressures.
When measuring the blown air temperatures, avoid any contact between
the thermocouple and the air vents.
At the conclusion of the test involving vehicles with
«RFTA»
ALL TYPES