Turbo Citroen BERLINGO 2005 1.G Workshop Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2005, Model line: BERLINGO, Model: Citroen BERLINGO 2005 1.GPages: 462, PDF Size: 10.48 MB
Page 5 of 462
Downloaded from www.Manualslib.com manuals search engine GENERAL
C41 - 2
XSARA3 - 4
XSARA PICASSO5 - 6
BERLINGO7 - 8
Operations following a repair: C49
C411 - 12
XSARA13 - 14
XSARA PICASSO15
BERLINGO16
Lubricants17 - 39
ENGINE
Specifications40 - 41
Tightening torques: engines all types42 - 147
Cylinder head tightening: all types148 - 150
Auxiliary drive belt152 - 153
Checking and setting the valve timing181 - 182
C4279
XSARA280
XSARA PICASSO281
Valve clearances282Checking the turbo pressure:
Xsara picasso (DW10ATED)295
Checking the air supply circuit: Xsara (DV4TD)
296
Checking the air supply circuit: C4 (DV6ATED4)297
Checking the air supply circuit: C4 (DV6TED4)298
Checking the air supply circuit: C4 (DW10BTED4)299 - 300
Checking the air supply circuit:
Xsara picasso (DW10TD/ATED)301
Checking the exhaust gas recycling circuit:
Xsara (DV4TD)302
Checking the exhaust gas recycling circuit:
Xsara picasso (DV6TED4)303
Checking the exhaust gas recycling circuit:
Xsara picasso (DW10TD/ATED)304
IGNITION
Sparking plugs305
CLUTCH - GEARBOX - TRANSMISSION
C4307 - 308
Xsara309 - 310
Xsara picasso311
CONTENTS
Vehicle
identification
Capacities
INJECTION
Checking the low pressure fuel supply
circuit: Xsara (DV4TD)283
Checking the low pressure fuel supply
circuit: C4 (DV6TED4/ATED4)284
Checking the low pressure fuel supply
circuit: Xsara Picasso (DV6TED4)285
Checking the low pressure fuel supply
circuit: C4 (DW10BTED4)286
Checking the low pressure fuel supply
circuit: Xsara (DW10TD)287
Checking the low pressure fuel supply
circuit: Xsara Picasso (DW10TD/ATED)288 - 289
Checking the turbo pressure: Xsara (DV4TD)
290
Checking the turbo pressure:
C4 (DV6TED4/ATED4)291
Checking the turbo pressure:
Xsara Picasso (DV6TED4)292
Checking the turbo pressure:
C4 (DW10BTED4)293
Checking the turbo pressure:
Xsara picasso (DW10TD)294
Checking the oil
pressureClutch
specifications
Angl-t2-Index-2005 9/01/06 10:05 Page III
Page 108 of 462
Downloaded from www.Manualslib.com manuals search engine 102
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
9 Exhaust manifold 2,5 ± 0,2
10 Exhaust manifold stud 1 ± 0,2
11 Turbocompressor nuts 2,6 ± 0,6
12 Catalytic converter nuts 2 ± 0,1
Air flowmeter
13Pre-tightening0,1
Tightening0,9 ± 0,2
Engine: 9HX
B1BP39YP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 102
Page 112 of 462
Downloaded from www.Manualslib.com manuals search engine 106
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
21
Turbocharger lubrication pipe3 ± 0,5
222,1 ± 0,3
23 Oil pressure switch 2 ± 0,2
24 Oil gauge 0,8 ± 0,2
25 Electric oil gauge 2,7 ± 0,5
26 Piston skirt spray jets 2 ± 0,5
27 Oil filter cover 2,5 ± 0,5
28 Oil filter support 1 ± 0,2
29 Coolant/oil heat exchanger 1 ± 0,1
30 Drain plug 2,5 ± 0,3
31 Oil induction strainer 1 ± 0,1
32 Sump 1,2 ± 0,2
33 Oil pump assembly 0,9 ± 0,1
Engine: 9HX
B1DP1LMD
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 106
Page 120 of 462
Downloaded from www.Manualslib.com manuals search engine 114
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
9 Exhaust manifold 5 ± 0,2
10 Exhaust manifold stud 1 ± 0,2
11 Turbocompressor nuts 2,6 ± 0,6
12 Catalytic converter nuts 2 ± 0,1
Double butterfly housing (according to equipment)
13Pre-tightening0,1
Tightening0,9 ± 0,2
Engines: 9HY - 9HZ
B1BP39XP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 114
Page 124 of 462
Downloaded from www.Manualslib.com manuals search engine 118
ENGINE
118
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
21
Turbocharger lubrication pipe3 ± 0,5
222,1 ± 0,323 Oil pressure switch 2 ± 0,224 Oil gauge 0,8 ± 0,225 Oil level sensor 2,7 ± 0,526 Piston skirt spray jets 2 ± 0,527 Oil filter cover 2,5 ± 0,528 Oil filter support 1 ± 0,229 Coolant/oil heat exchanger 1 ± 0,130 Drain plug 2,5 ± 0,331 Oil induction strainer 1 ± 0,132 Oil sump 1,2 ± 0,233 Oil pump assembly 0,9 ± 0,1
Engines: 9HY - 9HZ
B1DP1LMD
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 118
Page 134 of 462
Downloaded from www.Manualslib.com manuals search engine 128
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engines9HZ - 9HY
Lubrication circuit
Oil pump assembly
Pre-tightening0,5 ± 0,1
Tightening0,9 ± 0,1
Oil/coolant heat exchanger1 ± 0,2
Turbocharger lubrication pipe3 ± 0,5
Diesel injection circuit
Injector fixing flange nut
Pre-tightening4 ± 0,1
Angular tightening65°±5°
Fuel high pressure common injection rail on engine block 2,2 ± 0,2
Union on fuel high pressure common injection rail
Pre-tightening1,7 ± 0,2
Tightening2,2 ± 0,2
Diesel injection pump on support2,2 ± 0,2
Union on injector diesel
Pre-tightening2 ± 0,5
Tightening2,5 ± 0,3
XSARA PICASSO
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 128
Page 142 of 462
Downloaded from www.Manualslib.com manuals search engine 136
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Flywheel
Flywheel4,8 ± 0,4
Clutch mechanism2 ± 0,2
Lubrication circuit
Oil pump1,6 ± 0,2
Coolant oil heat exchanger7 ± 0,7
Turbocharger lubrication pipe
Engine end4,8 ± 0,4
Turbocharger end2,2 ± 0,2
Injection circuit
Injector fixing flange nut3 ± 0,3
Unions on fuel high pressure common injection rail2 ± 0,2
Injection pump on support2,3 ± 0,2
Union on diesel injector2 ± 0,2
Injection pump pulley5 ± 0,5
Union on fuel high pressure pump2 ± 0,2
Cooling circuit
Coolant pump1,5 ± 0,1
Coolant inlet housing1,8 ± 0,1 Engines: RHY - RHZ
XSARA
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 136
Page 144 of 462
Downloaded from www.Manualslib.com manuals search engine 138
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
Exhaust manifold
1Pre-tightening1,5
Tightening3 ± 0,3
2 Turbocompressor 2,5 ± 0,2
3 Exhaust clip 2,5 ± 0,5
Cylinder head bolts (*)
Pre-tightening2,2 ± 0,2
4Tightening6 ± 0,5
Slackening1 Turn
Tightening6 ± 0,5
Angular tightening220° ± 5°
Engine: RHR
B1DP1LCPB1DP1LDC
(*) (4) Sequence of tightening
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 138
Page 296 of 462
Downloaded from www.Manualslib.com manuals search engine 290
INJECTION
CHECKS: TURBO PRESSURE
Tools.
[1]Pressure gauge for checking boost pressure: 4073-T.A
[2] Sleeve for checking boost pressure: (-).0171.F
Checks.
IMPERATIVE: Respect the following test conditions:
- Engine at operating temperature.
- Vehicle in running order.
- Engine under full load.
Preparation.
Remove the clips (1).
Fit the tool [2]in the place of the duct (2).
Couple the sleeve [2] on the pressure gauge[1]using the tube «a».
Mode of operation.
Position tool [1]in the vehicle.
Start the engine.
Engagefirst gear, start the vehicle.
Engage the gears up to third gear.
Decelerate to an engine speed of 1000 rpm.
Check the pressure: 0,6 ± 0,05bar
(1500 rpm).
Accelerate freely (change from fourth gear to third gear).Check the pressure: 0,9 ± 0,05bar (between 2500and 3500rpm).
Remove tools [1], [2] and «a».
Reposition the tube (2)and tighten the clips(1).
B1BP2NXD
C5FP06RC
Engines: 8HX - 8HZ
XSARA
Angl.-t2-page283-305-2005 9/01/06 10:18 Page 290
Page 297 of 462
Downloaded from www.Manualslib.com manuals search engine INJECTION
291
CHECKS: TURBO PRESSURE
IMPERATIVE: Respect the safety and cleanliness requirements.
Preparation.
IMPERATIVE: Respect the following test conditions:
- Engine at operating temperature.
- Vehicle in running order.
- Engine under full load.
Connect the diagnostic tool to the vehicle's diagnostic socket, carry out parameter measures.
Mode of operation.
Start the engine.
Engage first gear, start the vehicle.
Engage the gears up to third gear.
Decelerate to an engine speed of 1000 rpm.
Check the pressure: 0,6 ± 0,05 bar
(1500 rpm).
Accelerate freely (change from fourth gear to third gear).Check the pressure: 0,9 ± 0,05 bar (between 2500and 3500rpm).
Engines: 9HX - 9HY - 9HZ
C4
Angl.-t2-page283-305-2005 9/01/06 10:18 Page 291