ABS Citroen BERLINGO 2017 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2017, Model line: BERLINGO, Model: Citroen BERLINGO 2017 2.GPages: 292, PDF Size: 10.19 MB
Page 4 of 292
2
Berlingo2VP_en_Chap00a_Sommaire_ed02-2016
Key 18
Alarm 20
Doors
21
T
ailgate 23
Rear
roof flap
26
Central
locking
27
Instrument panel
28
Date and time
29
W
arning lamps
32
Fuel gauge
40
Coolant
40
Under-inflation
detection
41
Under-inflation
detection
with reinitialisation
43
Service
indicator
47
Lighting dimmer
48
Steering wheel
adjustment
49
Manual gearbox
49
Gear shift indicator
50
6-speed electronic
gearbox
51
Stop & Start
53
Starting and stopping
55
Hill start assist
56
Driving
recommendations
57Lighting
58
Wipers
61
Trip computer
63
Cruise control
64
Speed
limiter
67
Heating
/
Air
conditioning
manual
70 digital
72
Demisting and
defrosting
75
Front
seats
77
Rear
bench seat
79
Rear seats
(5 seat version)
82
Rear seats
(7
seat version)
85
Modularity
92
Front
fittings
94
Modutop
roof
97
Roof bars
102
Courtesy lamps
103
Load space cover
(5 seat version)
104
Load space cover
(7
seat version)
108
Mirrors
110
Electric windows
1
12
READY TO GO
3.
18-57 SAFETY
5.
1
13-147
Exterior 5
Interior 6
left hand drive
6 right
hand drive
7
Instruments and controls
8 left hand drive
8 right hand drive
10
T
echnical data - Maintenance
12
OVERVIEW
1.
4-14
General safety recommendations 113
Hazard warning lamps
1
14
Horn
114
Parking
brake
1
14
Parking
sensors
1
15
Reversing
camera
1
17
Anti-lock
braking system
(ABS)
118
EBA
118
ASR and DSC
1
19
Grip control
120
Active
City Brake
122
Seat belts
126
Airbags
129
Carrying children
133
Deactivating the passenger's front
airbag
136
Recommended seats
139
Installation
141
ISOFIX mountings
143
Recommended ISOFIX
seat
144
ISOFIXlocations
145
Child
lock
147
EASE OF USE and
COMFORT
4.
58-112
ECO-DRIVING
2.
15-17
Environment 15
Eco-driving 16
The "Visual search"
(visual
index) section
assists you in finding the
controls and functions
and their associated page
numbers on the schematic
outlines
of the vehicle.
Instruments and controls
left hand drive
13 right hand drive
14
Contents
Page 7 of 292
5
Berlingo2VP_en_Chap01_vue-ensemble_ed02-2016
ExTERIOR
Remote control 18-19
Changing the battery ,
reinitialisation
19
Key
18
Starting
55
Hill start assist
56
Central
locking /
unlocking
18,
27
Filler cap, fuel
tank
161-162
Fuel cut-of
f, Diesel
priming
163
AdBlue®, topping up 38-39, 164-169
Wiper blades
191
Door mirrors
1
10
Side repeaters
184
Active
City
Brake
122-125
Front lamps, foglamps, direction indicators
58-60, 181-184
Headlamp beam height adjustment
60
Changing front bulbs
181-184
Snow
cover
179
Front doors
21
Sliding side
doors
22-23
Key
18
Opening the bonnet
154
Child
lock
147
T
owing, lifting
192Towbar, swan neck towball 148-151
Parking
sesnsors
1 15-116
Reversing
camera
1
17
Rear
roof
flap
26
Emergency control
23
Spare
wheel,
jack,
changing a wheel,
tools
173-178
T
emporary puncture
repair
kit
172
Inflation,
pressures
201
Modutop
roof
97-98,
101
Roof bars
102Rear lamps, direction indicators 58-59
3rd
brake
lamp
186
Changing rear
bulbs
181-182, 185-186
Doors, tailgate
23-25
Accessories
152
Dimensions 193-196
Brakes, pads
1
14, 157, 159
Emergency
braking
1
18
ABS, EBFD
1
18
ASR, DSC
1
19
Grip control
120-121
Active
City Brake
122-125
T
yres, pressures
201
Snow chains
180
T
yre under-inflation detection
4
1-42
Tyre
under-inflation detection
with reinitialisation
43-46
Number plate lamps
186
1
OVERVIEW
Location
Page 34 of 292
32
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Instruments and controls
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
WARNING LAMPS
Warning lamp is indicatesSolution - action
STOP on, associated
with another
warning
lamp and
accompanied
by a message
in
the screen.major
faults linked with
the
"Brake fluid level",
"Engine oil pressure and
temperature", "Coolant
temperature", "Electronic
brake
force distribution" and
"Power steering" warning
lamps.Y
ou must stop as soon as it is safe to do
so. Park and switch off the ignition. Have it
checked by a CITROËN dealer or a qualified
workshop.
Parking
brake
/
Brake fluid
level
/ EBFDon.
that the
parking brake is applied or
has not been released fully.Releasing the parking brake switches off the warning lamp.
on. low
brake
fluid
level. Top up using a fluid recommended by CITROËN.
remaining on even
though the level
is correct and
associated with the
ABS
warning
lamp.
a fault with the electronic
brake force distribution. You must stop as soon as it is safe to do so.
Park and switch off the ignition.
Have it checked by a CITROËN dealer or a
qualified workshop.
Engine oil
pressure and
temperature on while
driving.
low pressure or a high
temperature. Park
and switch off the ignition then allow to cool.
Visually
check the level.
Chapter
7, "Levels" section.
remaining on,
even though the
level is correct.a major fault. Have it checked by a CITROËN dealer or a qualified
workshop.
Each
time
the
vehicle
is
started:
a
series
of
warning lamps comes on applying a self-test check.
They
go off almost
immediately
.
Engine
running:
the
lamp
becomes
a
warning if it remains on continuously or flashes.
This
initial
warning
may
be
accompanied
by an audible signal and a message in the screen.
Do
not
ignore
these
warnings.
Page 37 of 292
+
ABS
35
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Instruments and controls
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Warning lamp isindicatesSolution - action
Power
steering on. a fault with the
system.
The vehicle
retains conventional steering without assistance. Have
it checked by a CITROËN dealer or a qualified workshop.
Door open
detectionon and accompanied
by a message in the
screen. that a door is not
closed
correctly.Check
that all of the doors are closed.
ABS remaining
on.a fault with the anti-
lock
braking system.The
vehicle retains conventional braking.
Have
it checked by a CITROËN dealer or a
qualified
workshop.
ESC flashing.
triggering of the ASR
or
DSC regulation.The system optimises traction and improves the
directional
stability of the vehicle.
Chapter
5, "Driving safety" section.
remaining
on.a fault with the
system.
E.g.:
under-inflation
of
the tyres.E.g.:
check the pressure of the tyres.
Have
it checked by a CITROËN dealer or a
qualified
workshop. (Wheel speed sensor,
hydraulic
valve block, ...).
Under-
inflation on.
the tyre pressure is
too low in or more
wheels.Check
the tyre pressure as soon as possible.
This
check must be done with the tyres cold.
flashing
then
remaining on,
accompanied by the
Service warning
lamp, and depending
on equipment, the
display
of a message.the tyre pressure
monitoring system
has a fault or one of
the wheels does not
have
a sensor.Detection
of under-inflation is no longer assured.
Have
it checked by a CITROËN dealer or a
qualified
workshop.
Particle filter on. a problem with the
particle
filter (fuel
additive
level, risk of
blockage, ...).Have
the filter checked by a CITROËN dealer or
a
qualified workshop.
Chapter
7, "Levels" section.
READY TO GO
3
Page 120 of 292
ABS
ABS
11 8
Berlingo2VP_en_Chap05_Securite_ed02-2016
ANTI-LOCK BRAKING SYSTEM
(ABS / EBFD)
The ABS and EBFD (electronic brake force distribution) systems improve the
stability and manoeuvrability of your
vehicle
on braking, in particular on
poor
or slippery surfaces.
The
ABS
prevents locking of the
wheels, the EBFD provides control of
the
braking pressure wheel by wheel.If this warning lamp comes
on, accompanied by an
audible signal and a message
in the screen, it indicates a
malfunction of the ABS which
could result in a loss of control of the
vehicle
on braking.
If this warning lamp comes
on,
together with the brake
and ST
OP warning lamps,
accompanied by an audible
signal and a message in the
screen, it indicates a malfunction of
the
electronic brake force distribution
which could result in a loss of control of
the
vehicle on braking.
EMERGENCY BRAKING
ASSIST
ANCE (EBA)
In an emergency, this system enables
the optimum braking pressure to be
reached
more quickly, press the pedal
firmly
without releasing it.
It is triggered by the speed at which the
brake
pedal is pressed down.
This
alters the resistance of the brake
pedal
under your foot.
To maintain operation of the
emergency
braking assistance system:
keep
your foot on the brake pedal.
Good practice
The anti-lock braking system comes into operation automatically when
there is a risk of wheel lock. It does not
reduce
the braking distance.
On very slippery surfaces (ice,
oil, etc...)
the
ABS
may increase the
braking
distance. When braking in
an emergency
, do not hesitate to
press
the brake pedal firmly, without
releasing the pressure, even on a
slippery surface, you will then be able
to continue to manoeuvre the vehicle
to
avoid an obstacle.
Normal operation of the ABS may be
felt
by slight vibration of the brake
pedal.
When changing wheels (tyres and
rims), ensure that these are listed by
CITROËN
for the vehicle. Stop as soon as it is safe to do so.
In both cases, contact a CITROËN
dealer
or a qualified workshop.
Driving safely
Page 121 of 292
11 9
Berlingo2VP_en_Chap05_Securite_ed02-2016
Driving safely
ANTI-SLIP REGULATION (ASR)
AND
DYNAMIC STABILITY
CONTROL (DSC)
These systems are linked and complement the ABS.
The
ASR system is very useful for
maintaining optimum drive and
avoiding losses of control of the vehicle
on
acceleration.
The system optimises drive to prevent
the
wheels skidding, by acting on the
brakes
of the drive wheels and on the
engine.
It also allows the directional
stability of the vehicle to be improved
on
acceleration.
Use the DSC to hold your course
without
attempting to countersteer.
If there is a variation between the
trajectory
followed by the vehicle and
that required by the driver
, the DSC
system automatically acts on the
engine
and the brake of one or more
wheels,
in order to put the vehicle back
on
course.
Deactivation
In certain exceptional conditions
(starting the vehicle when stuck in mud
or
snow, or on loose ground...), it could
prove useful to deactivate the
ASR and
DSC
systems to make the wheels spin
and
regain grip.
Operating fault
Good practice
The ASR/DSC systems offer increased safety during normal driving, but
should
not incite the driver to take risks
or
to drive at high speed.
The operation of these systems is
ensured if the recommendations
of the manufacturer regarding
the wheels (tyres and rims), the
braking
components, the electronic
components
and the fitting and repair
procedures
are observed.
After an impact, have these systems
checked
by a CITROËN dealer or a
qualified
workshop.
Operation
The warning lamp flashes when operation of the ASR or
DSC
is triggered.
They engage again:
-
automatically above 30 mph
(50
km/h), When a malfunction of the
systems occurs, the warning
lamp and the LED come on,
accompanied by an audible
signal and a message in the
screen.
-
Press the button or turn
the dial to the DSC OFF
position (depending on
model).
-
The
LED comes on: the
ASR
and
DSC systems no longer come into
play
. -
manually by pressing the
button again or by turning
the dial to this position
(depending
on model).Contact a CITROËN dealer or a
qualified
workshop to have the system
checked.
The warning lamp may also come on if
the
tyres are under-inflated. Check the
pressure
of each tyre.
SAFETY
5
Page 124 of 292
122
Berlingo2VP_en_Chap05_Securite_ed02-2016
ACTIVE CITY BRAKE
Active City Brake is a driving assistance system that aims to avoid
a frontal collision or reduce the speed
of an impact if the driver does not
react
sufficiently (inadequate brake
application).
This system is designed to
improve
driving safety.
It remains the driver's responsibility to
continuously monitor the state of the
traffic
and to assess the distances and
relative
speeds of other vehicles.
Active
City Brake can in no
circumstances replace the need for
vigilance
on the part of the driver. Never
look at the laser sensor
through an optical instrument
(magnifying
glass, microscope...)
at a distance of less than
10 centimetres:
risk of eye injury.Principle
Using a laser sensor located at the top
of the windscreen, this system detects
a vehicle running in the same direction
or stationary ahead of your vehicle.
When
necessary, the vehicle's braking
system is operated automatically
to avoid a collision with the vehicle
ahead.
Automatic
braking occurs later
than if done by the driver
, so as
to intervene only when there is a
high
risk of collision.
Conditions for activation
Active City Brake only operates if the following conditions are met:
●
ignition
on,
●
the
vehicle is in a forward gear,
●
speed
is between about 3 and
18 mph
(5 and 30 km/h),
●
the
braking assistance systems
(ABS,
EBFD, emergency braking
assistance) are not faulty
,
●
the
trajectory control systems
(ASR, DSC) are not deactivated
or
faulty,
●
the
vehicle is not in a tight corner,
●
the
system has not been triggered
during
the previous 10 seconds.
Driving safely
Page 151 of 292
149
Berlingo2VP_en_Chap06_Accessoire_ed02-2016
Good Practice
In certain cases of particularly arduous
use (towing the maximum load up a
steep slope in high temperatures), the
engine automatically limits its power.
In this case, the air conditioning is
automatically cut of
f to save engine
power.
Tyres
Check
the tyre pressures of the towing
vehicle and of the trailer
, observing the
recommended
pressures.
Chapter
7, "Levels" section.
If the coolant temperature
warning lamp comes on, stop
the vehicle and switch off the
engine
as soon as possible.Brakes
Towing
increases the braking distance. Drive at a moderate speed, change
down
early and brake gradually.
Towbar
We recommend the use of genuine
CITROËN towbars and their wiring
harnesses, which have been tested
and approved from the design stage of
your vehicle, and that you entrust the
fitting
of this equipment to a CITROËN
dealer
.
If
this equipment is not fitted by a
CITROËN dealer
, it is imperative that
it
is fitted using the electrical pre-
equipment installed at the rear of the
vehicle and in accordance with the
manufacturer's
instructions.
In accordance with the general
instructions a reminder of which has
been given above, we draw your
attention
to the risk associated with
fitting
a towbar or electrical accessory
not
recommended by CITROËN.
Fitting such equipment could result in
the failure of your vehicle's electronic
system.
Please obtain information from
the
Manufacturer before fitting this type
of
equipment.
Side wind
Sensitivity
to
side
wind
is
increased.
Drive smoothly and at a moderate
speed.
ABS/DSC
The
ABS or DSC systems only control
the
vehicle,
not
the
trailer
or
caravan.
Parking sensors
The
rear
parking
sensors
system
does
not
function
while
the
vehicle
is
towing.
Chapter
9,
"Identification
markings"
section.
Towing a trailer
ACCESSORIES
6
Page 187 of 292
185
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Rear lamps
This procedure requires the use of
the spanner supplied with the tools for
changing a wheel.
When
refitting, take care to
reposition the tabs and the wiring
correctly to avoid trapping the
wiring.
After changing the rear direction
indicator bulb, the reinitialisation time is
above
2 minutes.
-
Move aside the 4 tabs then extract
the
bulb holder.
-
Remove the faulty bulb by
pressing it lightly while turning it
anticlockwise.
-
Change
the bulb.
When
removing the lamp unit:
-
with tailgate, pull the lamp unit
towards the centre of the vehicle,
-
with hinged doors, pull the lamp
unit
towards you.
For more information on bulbs, refer to
the
"Types
of
bulb".
1.
Brake lamps / sidelamps
T
ype B,
P21/5W
-
21/5W
2.
Direction indicators
T
ype B, PY21W - 21W (amber)
3.
Reversing lamps
T
ype B, P21W - 21W
4.
Foglamps
T
ype B, P21W - 21W
High pressure jet washing When using this type of washing
on stubborn dirt, do not persist on
the headlamps, the other lamps
and their edges to avoid damaging
their
coating
and
seals. Chapter 9, "Changing a wheel"
section.
-
Identify the failed bulb, then open
the
rear doors to 180°.
Chapter
3, "Access" section.
-
Remove
the two fixing bolts using
the
spanner provided.
-
Pull
the lamp unit from the outside.
-
Holding the lamp, disconnect the
electrical
connector.
QUICK HELP
8
Changing a bulb
Page 194 of 292
192
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Without lifting (4 wheels on the
road)
You should always use a towing arm.
BEING TOWED
This procedure involves the use of
the towing eye supplied with the tools
for
changing a wheel.
From the front
- Unclip the cover by pressing the
bottom part.
-
Fully screw in the removable
towing eye.
From the rear
- Unclip the cover using a coin or the
flat part of the towing eye,
-
Fully screw in the removable
towing eye. When towing with the engine
switched
off, there is no braking or
steering
assistance.
Lifting (only 2 wheels on the
road)
It is preferable to raise the vehicle
using
professional lifting equipment.Vehicles fitted with a manual
gearbox (Diesel version)
In
the case of vehicles fitted with
a manual gearbox, the gear lever
must be in neutral, failure to observe
this special condition may result in
damage
to transmission and braking
components and the absence of
braking
assistance when the engine is
started
again.
Section
8,
"Changing
a
wheel".
Having your vehicle towed