audio bluetooth code Citroen BERLINGO 2017 2.G Owner's Manual

252
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Pairing a Bluetooth®
telephone
For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth
® mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary .
Procedure (short) from the
telephone
In the Bluetooth® menu of your device, select
the
 
system
 
name   in   the   list   of   devices   detected.
Enter a code of at least 4 figures in the device
and
 
confirm. Enter this same code in the system,
select " OK"
  and   confirm.
Procedure from the system
Activate the telephone's Bluetooth® function
and ensure that it is "visible to all" (telephone
configuration).
Press on Telephone to display the
primary
 pag

e.
Press
 
on
 
the
 
secondary
 
page.
Select " Bluetooth connection ".
Select " Search for devices ".
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended that you switch the Bluetooth®
function
 
on
 
your
 
telephone
 
off
 
and
 
then
 
on
 
again.
Select the name of the
desired peripheral from the
list and " Confirm ".
Enter a code of at least 4 figures for
the connection then " Confirm".
Enter this same code in the telephone then
accept
 
the
 
connection.
The
 
system
 
offers
 
to   connect   the   telephone:
-

i

n " Telephone "
 
(hands-free   kit,   telephone  
o

nly),
-

i

n " Audio streaming "
  (streaming:   wireless  
p

laying of audio files from the telephone),
-

i

n " Internet " (internet browsing, only if your
telephone is compatible with the "DUN"
Dial-Up
 
Networking   Bluetooth
® standard).
Select
 
one
 
or
 
more
 
profiles
 
and
 
confirm.
Audio and Telematics

265
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Audio system
Audio system / Bluetooth®
Contents
First steps
2 66
Steering
 
mounted
 
controls
 
2
67
Menus
268
Radio
268
Media
 2

70
Telephone
 2

74
Screen
 
menu
 
map(s)
 
2
76
Frequently
 
asked
 
questions
 
2
80
Your Audio system is coded in such a way that it will only operate
in
 
your
 
vehicle. As a safety measure, the driver must only carry out operations
which
 
require
 
prolonged
 
attention
 
while
 
the
 
vehicle
 
is
 
stationary.
When the engine is switched off and to prevent discharging of the
battery,
 
the
 
audio
 
equipment
 
may
 
switch
 
off
 
after
 
a
 
few
 
minutes.
Audio and Telematics
TECHNOLOGY on BOARD
10

274
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Telephone
Pairing a Bluetooth® telephone
Screen C
(Available according to model and version)
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
of the Bluetooth
® mobile telephone with
the Bluetooth® hands-free system of
your audio equipment must be carried
out with the vehicle stationary and the
ignition
 o

n.
Go
 
to
 
www.citroen.co.uk   for   more   information  
(

compatibility,
 
more
 
help, ...).
Activate the telephone's Bluetooth
® function
and ensure that it is "visible to all" (telephone
configuration).
Press the MENU
 

button. In
  the   menu,   select:
- "
Bluetooth : Telephone - Audio "
- "
Bluetooth configuration "
- "
Perform a Bluetooth search "
A window is displayed with a message that a
search   is   in   progress.
The services available depend on
the   network,   the   SIM   card   and   the  
c

ompatibility of the Bluetooth
® device
used.
Consult your telephone's manual and
your operator to find out which services
are
 
available
 
to
 
you.
*
 
If
 
your
 
telephone
 
is
 
fully
 
compatible. The first 4 telephones recognised are displayed
in
 
this
 
window.
The " Telephone " menu permits access to the
following
 
functions
 
in
 
particular:
 
" Directory " *,
" Calls list ", "Consult the paired equipment ".Select the telephone to be connected from the
list.
  Only   one   telephone   can   be   connected   at  
a

  time.
A   virtual   keypad   is   displayed   in   the   screen:  
e

nter   a   code   with   at   least   4   digits.
Confirm by pressing OK.
A message in the screen indicates the telephone
chosen.   To   accept   the   pairing,   enter   the   same
 c

ode on the telephone, then confirm with OK.
If pairing fails, the number of attempts is not
limited.
A message that the pairing has been
successful
  appears   in   the   screen.
The automatic connection authorised is only
active
  after   the   telephone   has   been   configured.
The directory and the call list can be accessed
after
  the   necessary   synchronisation   period.
Audio and Telematics