battery replacement Citroen BERLINGO DAG 2011 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2011, Model line: BERLINGO DAG, Model: Citroen BERLINGO DAG 2011 2.GPages: 223, PDF Size: 6.89 MB
Page 13 of 223

18
 Access 
  Good practice  
 Take care not to allow the remote  
control to come into contact with 
grease, dust, rain or a damp 
environment.  
 A heavy object attached to the key  
(keyring, ...) weighing on the shaft of 
the key in the switch, may cause a 
malfunction.  
 REMOTE CONTROL 
  Programming the remote  
control  
 Following changing of the remote  
control battery or disconnection of the 
vehicle battery, the remote control may 
have to be reprogrammed.  
 Wait at least one minute before using  
the remote control.  
 Insert the key in the ignition switch with  
the buttons (padlocks) of the remote 
control facing you.  
 Switch on the ignition. 
 Press the locking padlock for at least  
 fi   v e   s e c o n d s   w i t h i n   t h e   n e x t   t e n  
seconds.  
 Switch off the ignition. 
 Wait at least one minute before using  
the remote control.  
 The remote control is now working  
again.  
 Use only identical batteries or 
batteries of an equivalent type to those 
recommended by CITROËN dealers.  
 Do not discard the remote control  
batteries, they contain metals which 
are harmful to the environment.  
 Deposit them at a CITROËN  
dealership, or at any other approved 
collection point.  
  Folding/unfolding the key  
  Changing the battery  
 Battery ref.: CR1620/3 volts.  
   T h e   i n f o r m a t i o n   " b a t t e r y   fl   a t "   i s   g i v e n   
by an audible signal, accompanied by 
a message on the display.  
 To replace the battery, unclip the  
casing using a coin at the ring.  
 If the remote control does not work  
after the battery has been changed, 
re-programme the remote control.  
 There is a risk of damage if the  
replacement battery does not conform.   Press this button to release 
the key from its housing.  
 To fold the key, press this  
chromed button then fold 
the key into the housing. 
If you do not press the button, the 
mechanism may be damaged.