belt Citroen BERLINGO MULTISPACE RHD 2015 2.G Owner's Guide

122
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
cHILd SEAt At tHE r EA r
" r earward facing"
When a "rearward facing" child seat is
installed on a rear passenger seat,
move
  the   vehicle's   front   seat   forwards  
and

  straighten   the   backrest   so   that   the  
"rearward facing" child seat does not
touch

  the   vehicle's   front   seat.
"Forward facing"
When a "forward facing" child seat is
installed on a rear passenger seat,
move  the   vehicle's   front   seat   forwards  
and

  straighten   the   backrest   so   that   the  
legs of the child in the "forward facing"
child seat do not touch the vehicle's
front

  seat.
Ensure that the seat belt is
correctly
  tensioned.
For child seats with a support leg,
ensure
  that   this   is   in   firm   contact   with  
the

  floor. When a child seat is installed on a
passenger seat in row 3, put the
backrests
  of   the   outer   and   centre   seats  
in row 2 in front of the seat occupied by
the child seat in the table position, or if
this

  is   not   sufficient,   rermove   the   seats  
in row 2 so that the child seat or the
the legs of the child do not touch the
seats

  in   row   2.
Seats in row 3
a child seat with a support leg
must

  never   be   installed   on   a  
passenger seat in row 3

.
Child safety

126
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
cHILd SEAtS r E c OMME nd E d BY c I tr OË n
Group 0+: from birth to 13 kg
L1
"R
o MER Baby-Safe Plus"
Installed in the rearward facing position
Groups 2 and 3: from 15 to 36 kg L4
"KLIPPAN
  Optima"
From
  22kg   (about   6   years),   the   booster   is   used   on   its   own.
L5
"RÖMER
k I d FIX"
Can
  be   fixed   on   the   vehicle's   ISOFIX   mountings.
The
  child   is   restrained   by   the   seat   belt.
CITROËN
 
offers
 
a
 
range
 
of
 
recommended
 
child   seats   which   are   secured using a three point seat belt:
Child safety

 127
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
InStALLIn G A c HIL d SEAt
WI

t H
A
S u PPO rt LEG
Care must be taken when installing a child seat with a support leg in
the
  vehicle.   In   particular   you   should  
look

  for   the   presence   of   a   storage  
compartment

  below   the   rear   seat  
footwells.
The centre rear seat does not have
a

  storage   compartment   below   the  
footwell.

 
Y
ou   can   therefore   easily   fit   a  
child seat with a support leg, whether
installed

  with   the   ISOFIX   mountings   or  
using

  the   3   point   seat   belt.
d

o not place the support leg on
the storage compartment cover;
it
  might   break   in   a   serious   impact.  
Where

  the   adjustments   of   the   support  
leg allow it, we suggest two other
possibilities

  for   installation.
At the bottom of the storage
compartment
If the support leg is long enough, you
can  adjust   it   so   that   it   contact   the  
bottom

  of   the   storage   compartment.  
Remove

  all   objects   from   the   storage  
compartment

  before   installing   the  
support

  leg.
Away from the storage
compartment area
If the support leg is long enough and
can  be   inclined   sufficiently   (always  
by

  following   the   recommendations  
given in the installation instructions for
the child seat), you can position the
support

  leg   so   that   it   contacts   the   floor  
away

  from   the   storage   compartment.  
Adjust

  the   longitudinal   position   of  
the front or rear seat to obtain a
satisfactory position for the support leg
away

  from   the   storage   compartment.
If you cannot position the support
leg in the way described, you
should

  not   fit   a   child   seat   with  
support

  leg   to   this   seat.
Child safety
SaFETY
5

128
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
InStALLIn G c HIL d SEAt S AttA c HE d u SI n G t HE SEAt BELt
* A child   seat   with   support   leg   must   never   be   installed   on   an   outer   passenger   seat   in   row   2.
**  
A 
child   seat   with   support   leg   must   never   be   installed   on   a   passenger   seat   in   row   3.
In accordance with European regulations, this table indicates the option\
s for installing child seats secured using a seat belt
and
  universally   approved   (a)   according   to   the   weight   of   the   child   and   the   seat   in   the   vehicle.
u

:
seat suitable for the installation of a child seat secured using the sea\
t belt and universally approved, "rearward facing"
and/or

  "forward   facing".Seat(s)
Weight of the child and indicative age
u
nder 13 kg
(groups 0 (b) and 0+)
Up to approx 1 year
From 9 to 18 kg

(group 1)
1 to 3 years approx From 15 to 25 kg

(group 2)
3
  to   6   years   approxFrom 22 to 36 kg
(group 3)
6
  to   10   years   approx
Row 1 (c)(d) Passenger
seatu
uuu
Row 2 (e)
(5

  and   7   seats)
o
uter seats
u
*
u
*
uu
Centre seatuuuu
Row 3 (f) (g)
(7

  seats)
a
ll seats
u
**
u
**
uu
Child safety

 129
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
(a) Universal  child   seat:   child   seat  that can be installed in any vehicle
using
  the   seat   belt.
(b)
  Group   0:   from   birth   to   10   kg.
(c)

Refer to the legislation in force in
your country before installin

g your
child
  on   this   seat.
(d)

When a "rearward facing" child seat
is installed on a

front passenger
seat, the passenger's front airbag
must
  be   deactivated.   Otherwise,  
the child would risk being
seriously injured or killed if the
airbag is deployed

.
When a "forward facing" child seat
is installed on a

front passenger
seat, the passenger's front airbag
must
  remain   active. Remove
  and   stow   the   heads  restraint, before installin
g a child
seat
  with   backrest   on   a   passenger  
seat.
Refit

  the   head   restraint   once   the   child  
seat

  has   been   removed.
(e)
When a child seat is installed at
the rear
, forward facing or rearward
facing,
  move   the   vehicle's   seats  
in the row in front forwards and
straighten

  their   backrests   to   leave  
enough space for the child seat or
the

  child's   legs.
(f)
 
Put
  the   backrests   of   the   outer   and  
centre seats in row 2, located in
front of seat occupied by a child
seat, in the table position, or if this
is

  not   sufficient,   remove   the   seats  
in row 2, so that the child seat or
the child's legs do not touch the
seats

  in   row   2.
(g)

if the seats in row 3 are occupied,
do not leave a child seat installed
on the foldable row 2 seat, to allow
easy

  access   to   row   3.
Child safety
SaFETY
5

131
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In  this   case,   it   must   be   attached   to   the   vehicle   seat   using   the   three   point   seat  
belt.
Follow the instructions for fitting the child seat given in the

seat
manufacturer's installation guide.
ISOFIX child seat recommended and approved for your vehicle
"ISOFIX rÖMEr duO plus"
(size category B1)
Group 1: from 9 to 18 kg
Installed
  only   in   the   "forward   facing"   position.
Secured to rings A, as well as ring B, called the Top Tether, using
  an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,   lying.
Child safety
SaFETY
5

133
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
AdVIcE On cHILd SEAtS
At the rear, always leave sufficient space
  between   the   front   seat   and:
-

a "rearward facing" child seat,
-


the feet of a child seated in a
"forward

  facing"   child   seat.
For
  this,   move   the   front   seat   forward  
and, if necessary

, straighten its
backrest
  as   well.
The incorrect installation of a child seat
in
  a   vehicle   compromises   the   child's  
protection

  in   the   event   of   an   accident.
Check   that   there   is   no   seat   belt   or   seat  
belt

  buckle   under   the   child   seat,   as   this  
could

  destabilise   the   seat.
Remember   to   fasten   the   seat   belts   or  
the child seat harnesses

keeping the
slack relative to the child's body to a
minimum,   even   for   short   journeys.
For the installation of a child seat using
the seat belt, ensure that the seat belt
is well tensioned on the child seat
and that it is holding the child seat
firmly   against   the   vehicle's   seat.   If   the  
passenger

  seat   is   adjustable,   move   it  
forward

  if   necessary. For   the   optimum   installation   of   a  
"forward facing" child seat, ensure that
the

  back   of   the   child   seat   is   as   close   as  
possible

  to   the   backrest   of   the   vehicle's  
seat,

  or   in   contact   if   possible.
The   head   restraint   must   be   removed  
before installin

g a child seat with a
backrest   on   the   passenger   seat.
Ensure that the head restraint is
stowed or attached securely so that it
is not thrown around the vehicle in the
event   of   sharp   braking.
Refit   the   head   restraint   as   soon   as   the  
child

  seat   is   removed.children at the front
The legislation on carrying a child on
the
  front   passenger   seat   is   specific   to  
each

  country.   Refer   to   the   legislation   in  
force

  in   your   country.
d

eactivate the passenger's airbag
when a "rearward facing" child seat is
installed
  on   the   front   seat.
Otherwise,
  the   child   would   risk   being  
seriously

  injured   or   killed   if   the   airbag  
were

  deployed.
Installing a booster seat
The chest part of the seat belt must be positioned on the child's shoulder
without   touching   the   neck.
Ensure that the lap part of the seat belt
passes
  correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a  
booster

  seat   which   has   a   back,   fitted  
with

  a   seat   belt   guide   at   shoulder   level.
As
  a   safety   precaution,   never   leave:
-
 
one
  or   more   children   alone   and  
unsupervised in a vehicle,
-

 
a
  child   or   an   animal   in   a   vehicle  
which is exposed to the sun, with
the windows closed,
-

 
the
  keys   within   reach   of   children  
inside

  the   vehicle.
To prevent accidental opening of the
doors,
  use   the   "Child   Lock".
Take
 
care
 
not
 
to
 
open
 
the
 
rear
 
windows
 
by

  more   than   one   third.
To
  protect   young   children   from   the   rays  
of

  the   sun,   fit   side   blinds   to   the   rear  
windows.
For an installation in row 3, put the
backrests

 
of
 
the
 
outer
 
and
 
centre
 seats in row 2 in the table position, or
remove
 
these
 
seats
 
in
 
row
 
2,
 
so
 
that
 
the child seat or the child's legs do not
touch

 
the
 
seats
 
in
 
row
 
2.
Child safety
SaFETY
5