lock Citroen BERLINGO MULTISPACE RHD 2015.5 2.G Service Manual

 161
Berlingo-2-VP_en_Chap07_Verification_ed02-2015
Fuel
Berlingo-2-VP_en_Chap07_Verification_ed02-2015
REFUELLING
Low fuel level
Filling
The  fuel   tank   must   be   filled   with
the
engine off.
-
 
Open
  the   fuel   filler   flap.
-
 
Insert
  the   key,   then   turn   it   a   quarter  
turn.
-

 
Remove
  the   cap   and   hook   it   onto  
the clip located on the inside of the
flap.
When

  filling   with   fuel,  
a mechanical

  system   prevents  
opening

  of   the   left-hand   side   door.  
When

  the   fuel   filler   flap   is   open,   ensure  
that

  no   one   tries   to   slide   this   door.
Once
  the   flap   has   been   closed,   the  
sliding

  side   door   may   jam,   push   the  
door

  to   close   it   then   open   it.
When the low fuel level is
reached,
 
this
 
warning
 
lamp
 
comes

 
on. A
 

label   affixed   to   the   inside   of   the   flap  
reminds

  you   of   the   type   of   fuel   to   be  
used.
Y

ou   must   fill   with   at   least   5   litres   of   fuel  
for

  it   to   be   registered   by   the   fuel   gauge.
When
  the   fuel   filler   cap   is   opened,  
there

  may   be   a   slight   inrush   of   air.  
This
 
vacuum

  is   entirely   normal   and   is   due   to  
the

  sealing   of   the   fuel   system.
When
  filling   the   fuel   tank,   do   not  
continue after the 3rd cut-off of the
nozzle.
 This
 
could
 
cause   malfunctions.
The
 
capacity
 
of
 
the
 
fuel   tank   is  
approximately

 
60
 
litres.
-
 
After

 
filling
 
the
 
fuel   tank,   lock   the  
cap

 
and
 
close
 
the   flap.
Fuel used for petrol engines
The petrol engines are compatible with E10 bio-petrol (containing
10 % ethanol),   conforming   to   European  
standards

  EN   228   and   EN   15376.
E85 type fuels (containing up to
85 % ethanol) are reserved exclusively
for
  vehicles   marketed   for   the   use   of  
this

  type   of   fuel   (BioFlex   vehicles).  
The
 
quality

  of   the   ethanol   must   comply   with  
European

  standard   EN   15293.
You then have approximately 8 litres
of
 
fuel
 
remaining.
Fill up without delay to avoid running
out
 
of
 
fuel.
Never
 
risk
 
driving
 
until
 
you
 
run
 
out
 
of
 
fuel

 
as
 
this
 
may
 
damage
 
the
 
emissions
 
control

 
and
 
injection
 
systems.
CHECKS
7

180
Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015
CHANGING A BULB
Type A
All  glass   bulb:   pull   gently  
as

  it   is   fitted   by   pressure.
Type C
Halogen
  bulb:   release   the  
retaining

  spring   from   its  
housing. T
ype B
Bayonet
  bulb:   press  
on the bulb then turn it
anticlockwise.
T

ypes of bulb
Various
 
types
  of   bulb   are   fitted   to   your  
vehicle.

 
T

o
 
remove   them:
Type D
Light-emitting   diode  
(LED):

  for   replacement  
of

  the   daytime   running  
lamps,

  contact   a  
CITR

o Ë n dealer or a
qualified
  workshop.
Changing a bulb

182
Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015
3. Direction indicators
T ype B,   PY21W   -   21W   (amber)
-
 
Remove
  the   cover   by   pulling   the  
flexible

  rubber   tab.
-

T
urn the bulb holder a quarter turn
anticlockwise.
-
 
Remove
  the   bulb   by   pressing   it  
lightly

  while   turning   it   anticlockwise.
-
 
Change
  the   bulb.
-
 
Ensure
  that   the   cover   is   refitted  
correctly all round to assure correct
sealing. 4.

Front foglamps
T ype C, H1 - 55W
-
 
Remove
  the   three   clips   and   the  
screw securing the wheel arch liner

,
located
  below   the   bumper.
-
 
Move
  the   wheel   arch   liner   upwards.
-
d isconnect the bulb holder
connector by pressing the tab at
the
  top.-
 
Remove
  the   bulb   holder   by  
squeezing the two clips (at top and
bottom)

  using   a   finger   and   thumb.
-
 
Replace
  the   module   (bulb   holder  
and

  bulb).
-

Carry out the operations in reverse
order

  to   fit   the   module   and   refit   the  
wheel

  arch   liner.
Changing a bulb

184
Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015
Rear lamps
This procedure requires the use of
the spanner supplied with the tools for
changing  a   wheel.
When
  refitting,   take   care   to  
reposition the tabs and the wiring
correctly to avoid trapping the
wiring.
a

fter changing the rear direction
indicator
  bulb,   the   reinitialisation   time   is  
above

  2   minutes.
-
Move aside the 4 tabs then extract
the
  bulb   holder.
-
 
Remove
  the   faulty   bulb   by  
pressing it lightly while turning it
anticlockwise.
-

 
Change
  the   bulb.
When
  removing   the   lamp   unit:
-
 
with
  tailgate,   pull   the   lamp   unit  
towards the centre of the vehicle,
-

 
with
  hinged   doors,   pull   the   lamp  
unit

  towards   you.
For
 
more
 
information
 
on
 
bulbs,
 
refer
 
to
 the
 
"Types
 
of
 
bulb".
1.

Brake lamps / sidelamps


T

ype B,
 
P21/5W
 
-
 
21/5W
2.

Direction indicators


T

ype B,
 
PY21W
 
-
 
21W
 
(amber)
3.

Reversing lamps


T

ype B, P21W - 21W
4.

Foglamps


T

ype B, P21W - 21W
High pressure jet washing When using this type of washing
on stubborn dirt, do not persist on
the
 
headlamps,
 
the
 
other
 
lamps
 
and

 
their
 
edges
 
to
 
avoid
 
damaging
 
their

 
coating
 
and
 
seals. Chapter
  9,   "Changing   a   wheel"  
section.
-


Identify the failed bulb, then open
the

  rear   doors   to   180°.
Chapter
  3,   "Access"   section.
-
 
Remove
  the   two   fixing   bolts   using  
the

  spanner   provided.
-
 
Pull
  the   lamp   unit   from   the   outside.
-
 
Holding
  the   lamp,   disconnect   the  
electrical

  connector.
Changing a bulb

185
Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015
Number plate lamps
- Unscrew  the   two   nuts.
-  
Push
  the   pins.
-

If necessary
, disconnect the
connector
  to   remove   the   lamp.
-
 
Change
  the   bulb.
Third brake lamp
Type A, W16W - 16W
T
ype A, W5W - 5W
With tailgate
-
d
isengage the plastic lens using a
screwdriver.
-
 
Change

 
the
 
bulb.
-

Replace the plastic lens and press
on

 
it. With hinged doors
-
 
Unclip

 
the
 
interior
 
trim.
-
d
isconnect the connector by
moving
 
aside
 
its
 
tab.
-

T

urn the bulb holder a quarter turn
anticlockwise.
-
 
Change

 
the
 
bulb.
-
 
Put

 
the
 
bulb
 
holder
 
back
 
in
 
place
 
and

 
reconnect
 
the
 
connector.
-
 
Put

 
the
 
trim
 
back
 
in
 
place.
QUICk HELP
8
Changing a bulb

187
Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015Berlingo-2-VP_en_Chap08_aide-rapide_ed02-2015
Dashboard fuses
Tilt the cover to gain access to the
fuses.Fuses
F Amperes  
a a llocation
1 15 Rear wiper
2 -
n

ot used
3 5
a

irbag
4 10 Air
  conditioning,   diagnostic   socket,   mirror   control,  
headlamp

  beam
5 30 Electric windows
6 30Locks
7 5Rear
  courtesy   lamp,   front   map   reading   lamp,   roof  
console
8 20 Audio

  equipment,   screen,   tyre   under-inflation  
detection,

  alarm   and   siren
9 30Front
  and   rear   12V   socket
10 15 Central
  column
11 15 Low current ignition switch
12 15 Rain and sunshine sensor, airbag
13 5 Instrument
  panel
14 15 Parking
  sensors,   digital   air   conditioning   controls,  
hands-free

  phone   kit
15 30 Locks
16 -
n

ot used
17 40Rear
  screen/mirrors   demist/defrost
QUICk HELP
8
Changing a fuse

Audio and Telematics
 247
Berlingo-2-VP_en_Chap10a_SMEGplus_ed02-2015
As a safety measure and because it requires sustained attention by the
driver,
  using   a   smartphone   when  
d

riving   is   prohibited.
All
  operations   must   be   done   with   the  
v

ehicle stationary .
As
  a   safety   measure,   applications  
c

an only be viewed with the vehicle
stationary; display is interrupted once
the
  vehicle   is   moving.
The synchronisation of a
smartphone
  allows   applications   on   a  
s

martphone   that   are   adapted   to   the  
M

irrorLink
TM technology to be displayed
i
n
 
the
 
vehicle's   screen.
as

the principles and standards are
constantly
 
evolving,   it   is   recommended  
t

hat
 
you
 
update   the   operating   system   of  
y

our
 
smartphone.
For
 
the
 
list
 
of   eligible   smartphones,  
c

onnect to the brand's internet website
in
 
your
 
country. Please
  note:
-  
i
f   your   smartphone   is   supported,   to  
m

ake   it   "MirrorLink
TM" compatible, s
ome
 
phone
 
manufacturers  
n

evertheless invite you to first
download
 
a
 
dedicated   application.
When connecting a smartphone to the   system,   it   is   recommended   that Bl

uetooth
® be started on the smartphone.
Start the application on the
smartphone   (optional,   depending  
o

n   the   smartphone   and   operating  
s

yste m).
du
ring the procedure, several screen
pages relating to certain functions
are   displayed.
ac

cept to start and end the
connection.
Connect   a   USB   cable.   The  
s

martphone   charges   when  
c

onnected   by   a   USB   cable.
Press " MirrorLink
TM" to start
the
 
application
 
in
 
the   system.
on
ce connection is established, an
" Applications " page is displayed with the
list of applications already downloaded to
your   smartphone   and   adapted   to   MirrorLink
TM
technology.
If only one application has been downloaded to
the
  smartphone,   it   starts   automatically.
MirrorLinkTM smartphone
connection
Access to the different audio sources remains a
ccessible   in   the   margin   of   the   MirrorLinkTM
display,
 
using
 
touch
 
buttons
 
in
 
the
 
upper
 
bar.
Access
 
to
 
the
 
menus
 
for
 
the
 
system
 
is
 
possible  
a

t
 
any
 
time
 
using
 
the
 
dedicated
 
buttons.
If
 
the
 
smartphone
 
is
 
locked,
 
c

ommunication
 
with
 
the
 
system
 
is
 
only  
b

y
 
USB
 
cable.
From
 
the
 
system,
 
press
 
"
Connected
services "
 
to
 
display
 
the
 
primary
 
pag

e.
Voice recognition
Press the end of the lighting control stalk to s tart   voice   recognition   of   your   smartphone   via  
t

he   system.
Voice
  recognition   requires   a   compatible  
s

martphone   connected   to   the   vehicle   by  
Bl

uetooth.
TECHNOLOGY on BOARD
10

Audio and Telematics
264
Berlingo-2-VP_en_Chap10a_SMEGplus_ed02-2015
Radio
QUESTIONANSWER SOLUTION
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   "RDS"   function   by   means   of   the  
s

hort-cut   menu   to   enable   the   system   to   check  
w

hether   there   is   a   more   power ful   transmitter   in  
t

he   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not  
i

ndicate   a   fault   with   the   audio   system.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I
 
cannot   find   some   radio  
s

tations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list. Press   on   the   "Update   list"   function   in   the   system  
t

o   update   the   list   of   stations   received.
Some
  radio   stations   send   other   information   in   place   of   their   name  
(

the   title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The
 
name   of   the   radio  
s

tation
 c
hanges.

Audio and Telematics
 273
Berlingo-2-VP_en_Chap10b_Rd45_ed02-2015
RDS
The external environment (hills, buildings,   tunnels,   basement   car  
p

arks, ...)   may   block   reception,  
i

ncluding   in   RDS   mode.   This   is   a  
n

ormal   effect   of   the   way   in   which   radio  
w

aves   are   transmitted   and   does   not  
i

ndicate   any   failure   of   the   audio   system.
Press the MENU
 

button.
Select " Audio functions ".
Press OK.
Select the " FM waveband
preferences "
  function.
Press OK. Select "
Activate RDS ".
Press OK , R
dS i

s displayed in the
screen.
In " Radio "
  mode,   press   OK
 
directly   to   activate   /  
d

eactivate   RDS   mode.
R
dS

, if displayed, enables you to continue
listening
  to   the   same   station   by   automatic
 r

etuning   to   alternative   frequencies.
 H

owever, in certain conditions, coverage
of
  an   RDS   station   may   not   be   assured
 t

hroughout the country as radio stations
do
  not   cover   100   %   of   the   territory.   This
 e

xplains the loss of reception of a station
that
  can   occur   during   a   journey.
Receiving TA messages
Press the TA button to activate or
deactivate   traffic   messages.
The
  TA   (Traffic   Announcement)  
f

unction gives priority to T
a
alert
messages.   To   operate,   this   function  
n

eeds good reception of a radio station
transmitting   this   type   of   message.  
W

hen   a   traffic   report   is   transmitted,   the  
c

urrent   audio   source   (Radio,   CD,   ...)  
i

s
 
interrupted   automatically   to   play   the  
T

A
 
message.   Normal   playback   of   the  
a

udio   source   resumes   at   the   end   of   the  
t

ransmission   of   the   message.
TECHNOLOGY on BOARD
10

Audio and Telematics
285
Berlingo-2-VP_en_Chap10b_Rd45_ed02-2015
QUESTIONANSWER SOLUTION
The stored stations do not
function (no sound,
87.5
 
Mhz   is   displayed...). An
  incorrect   waveband   is   selected.Press the B
a

nd a
S
T button to return to the
waveband (
aM

, FM1, FM2, FM
aS
T) on which the
stations
  are   stored.
The
 
traffic   announcement  
(

TA)
 
is
 
displayed.   I  
d
o  
n

ot receive any traffic
information. The
  radio   station   is   not   part   of   the   regional   traffic   information  
n

etwork. Tune to a radio station which broadcasts traffic
information.
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   RDS   function   to   enable   the   system  
t

o   check   whether   there   is   a   more   power ful  
t

ransmitter   in   the   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   underground   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not  
i

ndicate   a   failure   of   the   audio   equipment.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   an   automatic   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
Sound cut-outs of 1 to
2 seconds
  in   radio   mode.
du
ring this brief sound cut-out, the R
d
S searches for another
frequency
  giving   better   reception   of   the   station.Deactivate
  the   RDS   function   if   the   phenomenon  
i

s   too   frequent   and   always   on   the   same   route.
TECHNOLOGY on BOARD
10