display Citroen C CROSSER 2008 1.G Repair Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C CROSSER, Model: Citroen C CROSSER 2008 1.GPages: 216, PDF Size: 4.85 MB
Page 164 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
162
CD PLAYER
Selecting CD mode If the player already
contains a disc, press the
“CD” button.
“CD”, the track number and
the playing time appear on the display.
Functions setting mode
This permits activation or deactivation
of the functions below.
Press the “TUNE” button for
more than two seconds to
access the functions setting
mode.
Then, press this button
several times in succession;
the functions setting mode changes in
the following order:
AF / CT / REG / TO-S / PTY (languages) /
SCV / PHONE / OFF.
Turn the “TUNE” dial respectively to the
left to deactivate the function (“OFF”) or
to the right to activate it (“ON”).
The “PHONE” is not operational at
present.
The functions setting mode is
d e a c t i v a t e d a f t e r a p p r o x i m a t e l y
10 seconds without any action. After inserting a disc, printed face up-
wards, the player starts automatically.
Ejecting a disc
Press this button to remove
the disc from the player.
The system automatically
switches to radio mode. Fast search
Press and hold button “ ”
or “ ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track
Press button “ ” or “ ” to
s e l e c t t h e p r e v i o u s o r n e x t
track respectively.
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again.
Random playing of a disc Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again.
Insert circular compact discs only.
8 cm compact discs must be inserted
in the centre of the player slot.
Once ejected, if the compact disc is
n o t r e m o v e d w i t h i n fi f t e e n s e c o n d s , i t
is reloaded into the player. Audio CDs
Page 165 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
162
CD PLAYER
Selecting CD mode If the player already
contains a disc, press the
“CD” button.
“CD”, the track number and
the playing time appear on the display.
Functions setting mode
This permits activation or deactivation
of the functions below.
Press the “TUNE” button for
more than two seconds to
access the functions setting
mode.
Then, press this button
several times in succession;
the functions setting mode changes in
the following order:
AF / CT / REG / TO-S / PTY (languages) /
SCV / PHONE / OFF.
Turn the “TUNE” dial respectively to the
left to deactivate the function (“OFF”) or
to the right to activate it (“ON”).
The “PHONE” is not operational at
present.
The functions setting mode is
d e a c t i v a t e d a f t e r a p p r o x i m a t e l y
10 seconds without any action. After inserting a disc, printed face up-
wards, the player starts automatically.
Ejecting a disc
Press this button to remove
the disc from the player.
The system automatically
switches to radio mode. Fast search
Press and hold button “ ”
or “ ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track
Press button “ ” or “ ” to
s e l e c t t h e p r e v i o u s o r n e x t
track respectively.
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again.
Random playing of a disc Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again.
Insert circular compact discs only.
8 cm compact discs must be inserted
in the centre of the player slot.
Once ejected, if the compact disc is
n o t r e m o v e d w i t h i n fi f t e e n s e c o n d s , i t
is reloaded into the player. Audio CDs
Page 166 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
163
MP3 / TAG ID3 CD Playing the beginning of each track Press the “SCAN” button to
s t a r t t h e p l a y i n g o f t h e fi r s t
ten seconds of each track
on the disc. “SCAN” appears
on the display and the corresponding
t r a c k n u m b e r fl a s h e s .
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again. The CD player and the CD changer
are compatible with the playing of MP3
fi l e s .
These must be recorded in ISO9660
Level 1 / Level 2, Joliet or Romeo format
on CD ROMs, CD-Rs or CD-RWs. The
C D s c a n c o n t a i n a m a x i m u m o f 2 5 5
fi l e s a n d 1 0 0 f o l d e r s o n 1 6 l e v e l s .
The Tag ID3 version 1 can be displayed
w h i l e p l a y i n g M P 3 fi l e s .
In the case of compact discs
containing both CD-DA and MP3
fi l e s , p l a y a u t o m a t i c a l l y b e g i n s w i t h
t h e C D - D A fi l e s .
To switch play between the two types
o f fi l e , p r e s s t h e “ C D ” b u t t o n f o r m o r e
than two seconds until an audible
signal is heard.
While using these compact discs,
the “Repeat”, Random play” and
“Playing of the beginning of the
tracks” functions are only applied to
fi l e s o f t h e s a m e f o r m a t .
Selecting an MP3 folder Turn the “FOLDER” dial re-
spectively to the right to se-
lect a folder in ascending or-
der or to the left to select a
folder in descending order.
Press the “DISP” button
several times in succession;
t h e C D - T e x t i n f o r m a t i o n
appears in the following
order:
DISC NAME / TRACK NAME / NORMAL
DISPLAY MODE. CD-TEXT DISPLAY
I f t h e i n f o r m a t i o n e x c e e d s
12 characters, press the
“PAGE” button to see the
rest.
I n t h e a b s e n c e o f C D - T e x t i n f o r m a t i o n
to be displayed, “NOTITLE” appears on
the display.
The CD player and the CD changer are
compatible with the displaying of CD-
T e x t i n f o r m a t i o n .
On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning
device and the burning speed used.
Page 167 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
164
When play begins, “READING” appears
on the display then disappears to make
way for the folder number, the track
number, the playing time and “MP3”.
Playing the beginning of each track
Press the “SCAN” button
t o s t a r t p l a y i n g t h e fi r s t t e n
seconds of each track in all of
the folders. “SCAN” appears
on the display and the corresponding
t r a c k n u m b e r fl a s h e s .
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again.
MP3 / Tag ID3 display
Press the “DISP” button
several times in succession;
the MP3 information appears
in the following order:
FOLDER NAME / TRACK NAME /
NORMAL DISPLAY MODE. I f t h e i n f o r m a t i o n e x c e e d s
12 characters, press the
“PAGE” button to see the
rest.
In the absence of MP3 or Tag ID3
information to be displayed, “NOTITLE”
appears on the display.
Press the “DISP” button
for more than two seconds
to activate the Tag ID3
information. “TAG” appears
on the display.
Press the “DISP” button several times
in succession; the Tag ID3 information
appears in the following order:
ALBUM NAME / TRACK NAME /
ARTIST NAME / NORMAL DISPLAY
MODE. To deactivate this information, press
the “DISP” button again for more than
two seconds.
Repeating the tracks in a folder
Press the “RPT” button for
more than two seconds to
repeat the playing of the
tracks contained in the
current folder. “D-RPT” appears on the
display.
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again.
Random playing of a folder
Press the “RDM” button to
start random playing of the
tracks in the current folder.
“RDM” appears on the
display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again.
Random playing of a disc Press the “RDM” button for
more than two seconds to
start random playing of the
tracks in all of the folders.
“D-RDM” appears on the
display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again. On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning
device and the burning speed used.
D e p e n d i n g o n t h e fl o w c h a r t o f t h e
M P 3 f o l d e r s a n d fi l e s o n t h e d i s c ,
play may not begin immediately.
Page 168 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
165
Selecting changer mode If the changer already
contains a disc, press the
“CD” button.
“CD”, the disc and track
numbers and the playing time appear
on the display.
After inserting at least one disc, printed
face upwards, the changer starts
automatically.
Ejecting a disc P r e s s t h i s b u t t o n b r i e fl y t o
remove the current disc
from the changer. Once ejected, if the compact disc is
n o t r e m o v e d w i t h i n fi f t e e n s e c o n d s i t
is re-loaded into the changer.
Loading a disc
appears on the display.
When the changer is ready,
the indicator light on the
“LOAD” button comes on
and “LOAD DISC N° (1-6)” appears on
the display.
If several slots are empty, select one
using one of the “DISC” buttons.
The CD changer can hold up to 6 CDs.
P r e s s t h e “ L O A D ” b u t t o n b r i e fl y . “ W A I T ”
Insert circular compact discs only.
8 cm compact discs cannot be
played by the changer. Loading all of the discs Ejecting all of the discs
Press this button for more
than two seconds. The
current disc is ejected.
Once this disc has been
r e m o v e d , t h e n e x t d i s c i s e j e c t e d
automatically in its turn.
Repeat these steps until unloading is
complete.
Selecting a disc Press one of the “DISC”
buttons several times in
succession until you reach
the disc required. The
symbol of the disc selected
appears on the display.
S e e a l s o “ C D - T e x t d i s p l a y ” a n d “ M P 3 /
Tag ID3 CD”.
Press the “LOAD” button for
more than two seconds.
The changer selects an
empty slot number from the
lowest to the highest and switches to
waiting for loading mode.
“LOAD DISC N° (1-6)” appears on
the display; insert the disc in the
corresponding slot.
The changer automatically selects the
n e x t e m p t y s l o t n u m b e r a n d r e t u r n s t o
waiting for loading mode.
Repeat these steps until loading is
complete. Play begins with the last disc
inserted.
CD CHANGER
Page 169 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
166
Playing of the beginning of each track Press the “SCAN” button to
s t a r t t h e p l a y i n g o f t h e fi r s t
ten seconds of each track
on the disc. “SCAN” appears
on the display and the corresponding
t r a c k n u m b e r fl a s h e s .
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again.
On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning device
and the burning speed used.
Random playing on all of the discs Press the “RDM” button for
more than two seconds to
start random playing of the
tracks on all of the discs. “D-
RDM” appears on the display.
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again.
Fast search
Press and hold button “ ”
or “ ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track Press button “ ” or “ ” to
select the previous track or
n e x t t r a c k r e s p e c t i v e l y .
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
T o e x i t t h i s m o d e , p r e s s t h i s
button again. Random playing of a disc
Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again. Repeating a disc
Press the “RPT” button for
more than two seconds to
repeat the playing of the
tracks of the current disc.
“D-RPT” appears on the display.
T o e x i t t h i s m o d e , p r e s s t h i s b u t t o n
again.
Audio CD
Page 171 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
168
AUXILIARY SOCKETS
A.
Left-hand audio input (RCA
white)
B.
Right-hand audio input (RCA
red)
C.
Video input (RCA yellow)
C o n n e c t a n e x t e r n a l a u d i o s y s t e m
to sockets A or
B to use the vehicle’s
speakers.
Connect the rear seat display (option)
to the additional socket C (refer to the
user manual supplied with the rear seat
display). Audio-CD system Audio-telematics system
Selecting the AUX source
Press the “CD” button for
more than two seconds.
“AUX REAR” appears on
the display.
T h e c o n n e c t i o n t o t h e e x t e r n a l a u d i o
system is activated.
To deactivate this connection and
change source, press the “AM/FM” or
“CD” button. After pressing “AUX”, the
c o n n e c t i o n t o t h e e x t e r n a l
audio and/or video system
is activated.
Selecting the AUX source
To deactivate the connection and
change source, press another button
on the display (FM, CD, ...). After pressing “Rear
Display”, the connection to
the rear audio and/or video
system is activated.
For safety reasons, the video
is not displayed while driving,
however the audio can be
played.
To display the picture and watch
a DVD, park the vehicle in a safe
place. Selecting the rear display source
Page 172 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
169
YOUR AUDIO-TELEMATICS SYSTEM
This consists of the following components:
- a t i l t i n g 7 ˝ L C D c o l o u r t o u c h s c r e e n ,
- a GPS aerial located in your fascia,
- a radio aerial located at the rear, on the roof of the vehicle,
- 4 to 6 speakers (according to version),
- controls around the screen and at the steering wheel plu s touch buttons on the screen according to the display,
- a voice synthesiser (male or female) giving the directions duri ng navigation,
GPS aerial
It allows you to:
- b e g u i d e d t o t h e d e s t i n a t i o n o f y o u r c h o i c e ( E u r o p e a n m a p o n 3 0 G b h a r d d i s c ) t a k i n g t r a f fi c c o n d i t i o n s i n t o a c c o u n t ,
- listen to the radio,
- l i s t e n t o a u d i o C D s ( C D D A , C D - T e x t , C D - R / R W ) o r C D s w i t h M P 3 a n d W M A fi l e s ,
- copy audio CDs to a music server, up to 2,500 songs (coded i n MP3/WMA) on 10 Gb available on the hard disc,
- play DVDs (playing of video if the vehicle is stationary),
- make hands-free telephone calls.
For maintenance of the display, we recommend the use of a n on-abrasive soft cloth (spectacles cloth) without any additional
products.
Page 173 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
170
AUDIO: selection of the Audio-
video (FM, CD, music server, etc.)
or Navigation (map) display.
VOL: adjustment of the audio-
video volume. OPEN: tilts the
display and permits
access to the CD/
DVD. A second
press closes the
display. SCALE: changing of the scale of
the map.
E N T R : c o n fi r m s t h e c h o i c e o f t h e
item selected on the screen.
F o r c e r t a i n o p e r a t i o n s , c o n fi r m a t i o n
is given by contact with the touch
screen.
Scrolling of the map displayed or
selection of an item.
For safety reasons, it is
imperative that the driver
carries out operations which
require prolonged attention with
the vehicle stationary.
DESCRIPTION OF THE CONTROLS
Changing of the audio-
video source (FM, CD, music
server, ...).
Activation/deactivation of the
mute.
N e x t o r p r e v i o u s s e l e c t i o n f o r :
- a radio station,
- an audio track (CD),
- a chapter (DVD).
M o v e a fi n g e r o v e r t h e s c r e e n t o o p e r a t e
the system.
Use the buttons offered on the screen.
POWER: audio system on/off
(only).
Setting of the audio volume.
Page 174 of 216
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
171
DESCRIPTION OF THE CONTROLS - MENUS
MODE: Audio-video menu for:
- the radio,
- the audio, MP3 or WMA CD,
- the music server,
- the DVD.
MENU: Navigation-guidance menu
for selecting:
- a destination,
- a point of interest (POI),
- an advanced search by POI,
- one of the 20 previous destinations,
- an address stored in the address book,
- the return home,
- certain navigation settings,
- a route demonstration. NAVI: displaying of the current location
on the
map .
SET:
Settings menu for:
- switching off the display,
- selecting the sound setting,
- selecting the picture quality,
- selecting the language, the time zone or the units,
- selecting the size of the DVD picture,
- selecting the guidance voice, the display colour ranges or the
displaying of the audio-video
icon,
- setting certain equipment available in your vehicle. INFO:
Information menu for the
consultation or setting of certain
parameters of your vehicle.