height Citroen C CROSSER 2011 1.G Owner's Manual

7
FAMILIARI
S
AT I
ON

CONFIGURING SEATS


Rear seats
(row 2)
Forwards-backwards adjustment
Seat back an
gle adjustment
53
Head restraint height adjustment

Access to the third row (7-seat version)
54



Rear bench seat (row 3)
The rear bench seat can be folded. It is stowed in a location in the fl oor of the
vehicle.
58


52

9
FAMILIARI
S
AT I
ON

INSTRUMENTS AND CONTROLS
1.
Audio system controls.
2.
Telephone controls.
3.
Steering wheel adjustment control.
4.
Front and rear wipers/screenwash control stalk.
5
. Instrument panel.
6
. Driver’s airbag.
H
orn.
7. Cruise control switches.
8.
Gear lever.
9.
Parking brake.
10.
Bonnet release lever.
11.Enclosed storage compartment.
12.
Headlamp height adjustment.
Deactivation of the ASC s
ystem.
Deactivation of the audible parkin
gsensors.
13. Cup holder.
14.
Side adjustable air vent.
15.
Information button.
16.
Window demisting/defrosting vent.
17.
Windscreen demisting/defrostingvent.

11
FAMILIARI
S
AT I
ON
SITTING COMFORTABLY
51




Front seats

Forwards-backwardsDriver’s seat cushion height and angle Seat back angle
Manual adjustments

Electric adjustments (driver’s seat only)
F
orwards-backwardsSeat cushion height and angle

Seat back angle
50

12
FAMILIARI
S
AT I
ON
SITTING COMFORTABLY
1.
Releasing the adjustment mecha-nism.
2.
Locking the adjustment mecha-nism.
3.
Adjustment of the height of thesteering wheel.


Manual steering wheel height adjustmentDoor mirror adjustment
A. Selection of the mirror
B.
Adjustment of the position of the mirror.
C.
Folding/Unfolding.
63

Rear view mirror adjustment
D.
Control for selection of the "day/night" position of the mirror.
61

62



Front seat belt
1.Fastening.
2.Height adjustment.
105

II
!
COMFORT
50
FRONT SEATS

Forwards-backwards adjustment
Raise the control bar and slide the seat
forwards or backwards.
When your seat is at the correct dis-
tance, move it forwards and backwards
slightly without using the control bar to
check that it is secured correctly.
Driver's seat cushion height and
angle adjustment
Pull and/or push the control several
times to adjust the height of the seat.
Seat back angle adjustment
Pull the control upwards to adjust the
seat back.
When the seat back is at the correct angle,
release the control.

Manual mode

To prevent the seat back from
moving forward sharply and
knocking you, press on it with
your back or push it with your hand
while operating the lever.

II
COMFORT
51

Electric mode (driver's seat only)


Forwards-backwards adjustment
Push the control forwards or rearwards
to move the seat to the position re-
quired.
Driver's seat cushion height and
angle adjustment
Pull or push the front of the control to raise
or lower the front of the seat cushion.
Pull or push the rear of the control to raise
or lower the rear of the seat cushion.
Pull or push the entire control to raise or
lower the entire seat cushion.
Seat back angle adjustment
Tilt the control forwards or rearwards to
straighten or tilt the seat back.
FRONT SEATS
To avoid discharging the battery, use
the electric mode with the engine
running.

II
!
COMFORT
52
Front armrest
You can move the console housing cover
in order to use it as an armrest.
With the engine running
, tilt the button
to the position required.
The temperature of the seat is regulated
automatically.
There are two setting positions:


- "HI": High heating

- "LO": Low heating
When the button is in the intermediate
position, the heating is switched off.
The indicator lamps A
come on when
the system is activated.









Heated seats adjustment


)
To raise it, pull upwards.

)
To lower it, push it downwards,
pressing the height adjustment but-
ton at the same time.

)
To remove it, raise it to the high
position, then remove it pressing
the height adjustment button at the
same time.

)
To r efi t it, engage the rods of the
head restraint in the apertures,
pressing the height adjustment but-
ton at the same time.






Head restraint height adjustment

Never drive with the removed head
restraints in the vehicle as they
could be thrown around the vehi-
cle on sharp braking. They must always
be in place and adjusted correctly.
After installing the head restraint,
check that the height adjustment but-
ton has engaged correctly.
The adjustment is correct when the top
of the head restraint is aligned with the
top of the head of the seated person.

II
!
!
63
STEERING WHEEL MANUAL
HEIGHT ADJU
STMENT



)
Pull the locking lever downwards
(position B
) while supporting the
steering wheel.

)
Adjust the steering wheel to the re-
quired height.
)
Lock the steering wheel adjustment by
pushing the lever upwards (position A
).

The sun visors fold forwards, and to the
side when they are unhooked.
They are fi tted with a courtesy mirror
and a ticket holder.
As a safety precaution, these op-
erations must only be carried out
while the vehicle is stationary.
AREAS FOR TOLL CARDS/CAR
PARK TICKETS


The athermic windscreen has a non-
refl ective zone located above the base
of the rear view mirror.
It is intended for affi xing toll cards and/
or car park tickets.
MAT


When removing the mat on the driver's
side, move back the seat as far as pos-
sible and remove the fi xings.
When refi tting, position the mat cor-
rectly on the pins and clip the fi xings.
Check that the mat is secured fi rmly.
To prevent any risk of jamming
under the pedals:


- only use mats suited to the
fi xings already present in
the vehicle; it is imperative
that these fi xings are used.

- never fi t one mat on top of
another.

IV
VISIBILITY
89
MANUAL HEADLAMP
ADJU
STMENT

To avoid dazzling other road users,
the height of the headlamps must be
adjusted in relation to the load in the
vehicle.

AUTOMATIC HEADLAMP
ADJU
STMENT
On vehicles with xenon bulbs: when
stationary
, the system automatically
corrects the height of the beam, what-
ever the load of the vehicle. The driv-
er is then assured of having optimum
lighting and not causing a nuisance to
other road users.

In cases of malfunction
,
this message appears in
the multifunction screen.

7-seat version


0.
Driver only or Driver + 1 passenger
in the front.

1 or 2.
Driver + 1 passenger in the front
+ 2 passengers on the third
bench seat.

3.
7 occupants (including the driver
with or without maximum authorised
load).

4.
Driver + maximum authorised load.


5-seat version


0.
Driver only or Driver + 1 passenger
in the front.

1 or 2.
5 occupants (including the driver).

3.
5 occupants (including the driver) +
maximum authorised load.

4.
Driver + maximum authorised load.
Do not touch the xenon bulbs. Contact
a CITROËN dealer or a qualifi ed work-
shop.

VI
SAFETY
105
SEAT BELTS
Height adjustment










Fastening


)
Pull the strap, then insert the tongue
in the buckle A
.

)
Check that the seat belt is fastened
correctly by pulling the strap.


)
to lower the attachment point, press
the control B
and slide the fi xing C

down,

)
to raise the attachment point, press
the control B
and slide the fi xing C
up.


Unfastening


)
Press the red button on the buckle A
.


Front seat belts


The front seat belts are fi tted with a pre-
tensioning and force limiting system.
This system improves safety in the front
seats in the event of a front or side im-
pact. Depending on the severity of the
impact, the pretensioning system instant-
ly tightens the seat belts against the body
of the occupants.
The pretensioning seat belts are active
when the ignition is on.
The force limiter reduces the pres-
sure of the seat belt on the chest of the
occupant, so improving their protection.