instrument panel Citroen C ZERO 2012 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2012, Model line: C ZERO, Model: Citroen C ZERO 2012 1.GPages: 168, PDF Size: 5.06 MB
Page 4 of 168
.
Contents
Instrument panel 18
Indicator and warning lamps 19
Main battery state of charge indicator 26
Energy consumption / generation indicator 27
Distance recorder 28
Trip distance recorder 28
Lighting dimmer 29
Ser vice indicator 29
Range indicator 30
Monitoring Familiarisation
Remote control key 31
Electric windows 34
Doors 35
Boot 36
Charging fl aps 37
Access
Front seats 38
Rear seats 40
Mirrors 42
Interior fi ttings 44
V
entilation 47
Heating 49
Air conditioning 49
Rear screen demist - defrost 52
Comfort
Starting - stopping the vehicle 53
Manual parking brake 54
Drive selector
55
Driving
Lighting controls 57
Automatic illumination of headlamps 59
Headlamp adjustment 59
Wiper controls 60
Courtesy lamp 61
Visibility
Page 9 of 168
.Familiarisation
7
Instruments and controls
1.
Driver's airbag.
Horn. 2.Instrument panel.
3.Wiper stalk. 4. Side vents.
5. Window demisting vent.
6.Electric window switches and switch for deactivating the the front and rear passenger electric window controls.
7. Opening control for the fast charging flap (vehicle left hand side).8.Bonnet release lever.9.
Opening control for the normal charging flap (vehicle right hand side). 10.Fusebox.11.
Door mirror controls.12.
Headlamp height adjustment.
ASR/ESP deactivation switch.13.Steering lock and ignition switch.
Page 16 of 168
Familiarisation
14
Monitoring
1.
With the ignition on, the orange and red
warning lamps come on.2. With the engine running, these warninglamps go off.
I
f a warning lamp remains on, refer to the relevant page.
Warning lamps
19A
. "Neutral" position.
B. Energy consumption. C.
"Eco" zone.D."Charge" zone.
Energy consumption /
generation indicator
27
Four successive aler ts indicate that the energy
available in the main battery is dropping to a
low level:
- 2 bars of the energy gauge in the
instrument panel, on and
flashing:
starting to use the reser ve.
- The last bar in the energy gauge flashing.
- The last bar disappears:
display of the range disappears; the heatingand air conditioning are switched off.
Low energy alerts
- Display of this warning lamp in
the instrument panel:
progressive reduction in the
power available from the motor.
26
Page 18 of 168
Familiarisation
16
Charging your vehicle
This procedure consists of connecting the
vehicle to a special fast charging station.
A.Interior opening control.
B.Exterior flap (left hand side of the vehicle).
C.Socket cover.
The cable to use is the one attached to the charging station.
Fast charge **
86
This procedure consists of connecting the
vehicle to a domestic power point. A. Interior opening control.B.
Exterior flap (right hand side of the vehicle).
C.Socket cover.
Normal charge
82
Before making any connection, checkthat the power point you want to use meets standards *
and is compatiblewith the current rating on the control unit of the charging cable.In all cases, it is recommended that you first have an initial check and then regular checks on your
installation by a qualified electrician.
Ensure that the charging station and its cable are compatible with your vehicle.
You must always use a genuineCITROËN charging cable.
Do not use an electricalextension lead, multi-wayconnector, adaptor or timer.
*(For example, in France: the standard is NF C 15 -10 0).
**
Depending on equipment.
To optimise the ser vice life of themain battery, recharge it completely ever y 15 days.For a recharge to be complete
, follow the procedure for a normalrecharge
(domestic power point)without interruption, until it switches off
automatically (charging lamp goes off inthe instrument panel).
Page 20 of 168
Monitoring
18
Instrument panel Panel bringing together the various gauges and indicators for the operation of the vehicle.
1.State of charge gauge for the main battery.
Drive selector position indicator.2.Energy consumption / generationindicator.3.Speedometer4.Screen.
A.Total distance recorder.B.Trip distance recorder (Trip A or B).C.Instrument panel lighting dimmer.D.Indicator of distance remaining to the
next service.E.Indicator of time remaining to the next
service.F.Indicator of remaining range.
5.Screen control button. Displays the various functions in turn.
Resets the function selected (trip recorder or ser vice indicator).
Adjusts the level of instrument lighting.
For more information, refer to thecorresponding section.
Gauges and indicators
Screen
Page 22 of 168
Monitoring
20
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel, this confirms that the corresponding system has come into operation.
Warning / indicator lampStateCauseAction / Observations
Left-hand direction indicator
Flashing with audible signal. The lighting stalk is pushed down.
Right-hand direction indicator
Flashing with audible signal. The lighting stalk is pushed up.
Hazard warning lampsFlashing with audible signal. The hazard warning lamps switch,located on the dashboard, has been
operated. The left-hand and ri
ght-hand direction indicators and
their associated indicator lamps flash simultaneously.
Sidelampsand/or dipped beamheadlamps
On fixed. The sidelamps and/or dipped beamheadlamps are on.
Front foglampsOn fixed. The front foglamps are switched on. Turn the ring on the stalk rear wards twice to switch off
the front foglamps.
Rear foglampOn fixed. The rear foglamp is switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamp.
Main beam headlampsOn fixed. The lighting stalk is pulled towardsyou. Pull the stalk to return to dipped beam headlamps.
Page 28 of 168
Monitoring
26
Main battery state of charge indicator
Display
Four successive aler ts indicate that the energyavailable in the main battery is dropping to alow level:
- 2 bars of the state of charge gauge in the
instrument panel, on and flashing: star tingto use the reserve.
- The last bar in the state of charge gauge flashing.
- The last bar disappears: display of the
range disappears; the heating and air conditioning are switched off .
Low energy alerts
- Display of this warning lamp in
the instrument panel: progressive reduction in the power availablefrom the motor.
The state of char
ge of the main battery is displayed continuously in the instrument panel.
Page 30 of 168
Monitoring
28
Instrument panel screen When the ignition switch is in the " ON
" position, press button A
repeatedly to display the following information in turn.
Distance recorder
System for measuring the total distance
travelled by the vehicle during its life.Press button A.The total distance appears in the screen.
Reset to zero
With the ignition on and either trip Aor Bdisplayed, press the button for more than
2 seconds.
Trip distance recorder (Trip A or B)
Each of these trip recorders indicates thedistance travelled since the last reset.
Press button A to display the desired trip.
The range indicator is displayed in the units (miles or km) corresponding to those of the speedometer (mph or km/h).
Changing the speedometer units
With the total distance recorder displayed, press and hold button A
for a few seconds tochange the speedometer units (mph or km/h).
Page 32 of 168
Monitoring
30
This function gives an estimate of the number
of miles (km) that your vehicle can still cover,
based on the recent conditions of use (driving style, use of heating, air conditioning...).
Range indicator
When the remaining range falls to a low level,"- - -"
is displayed in the instrument panel.
The display of "---", indicating that theservice date has arrived, comes on automatically after a cer tain time and distance travelled. The screen then indicates the time remaining before the next service is due.
Resetting the service indicator to zero
After each ser vice, the ser vice indicator shouldbe rest to zero.
The procedures is as follows: )Switch off the ignition (switch in the LOCK
or ACC position).
)Press the reset button A
several times in succession until the service indicator is
displayed. )Press and hold the reset button for a fewseconds until the spanner flashes. )Press the reset button while the spanner is flashing to change the display from "---"
to"CLEAR".The distance (or time) remaining before thenext ser vice is due is displayed.
The range can be displayed in miles or kilometres.
To c h a nge the units, refer to the"Distance recorder" section.