CITROEN C1 2020 Service Manual

39
C1_en_Chap02_ouvertures_ed01-2016
Locking / unlocking and opening the boot
Using the keyUsing the remote control
F Press  the   open   padlock   to   unlock  t
he   vehicle   and   boot.
-
 
I

nsert
 
the
 
key
 
in
 
the
 
lock
 
barrel
 
and
 
turn
 
i

t
 
to
 
the
 
right
 
to
 
unlock
 
and
 
release
 
the
 
t

ailgate.
 T

he
 
vehicle
 
remains
 
locked.
-
 R
aise
 
the
 
tailgate
 
by
 
the
 
exterior
 
handle
 
to
 o
pen
 
it.
F
 
P

ress
  the   opening   button   to   release   the  
t

ailgate.
F
 
R

aise
  the   tailgate   by   the   exterior   handle   to  
o

pen
 
it. F
 
P
ress   the   closed   padlock   to  
u

nlock   the   boot   and   vehicle.
As
 
soon
 
as
 
you
 
close
 
the
 
tailgate,
 
it
 
locks
 
ag

ain.
2
Access

40
C1_en_Chap02_ouvertures_ed01-2016
F With  the   electronic   key   on   your   person,  p
ress   the   boot   opening   control   to   unlock  
a

nd   release   the   tailgate.
 T

he   vehicle   is   unlocked   as   well.
F
 
R
aise   the   tailgate   by   the   exterior   handle   to  
o

pen   it.
Using the Keyless Entry
and Starting system
If the vehicle had been previously unlocked by the   front   door,   it   is   not   necessary   to   have   the  
e

lectronic   key   on   your   person   to   use   the   boot  
ope

ning
 c
ontrol. F
 
W
ith   the   electronic   key   on   your   person,  
p

ress   the   button   on   the   boot   sill   to   lock   it.


or
 L

ock   the   vehicle   by   the   front   doors.
When   closing   the   boot,   do   not   slam   shut  
t

he   tailgate:   guide   it   down   and   release   it  
a

t   the   end   of   its   travel.
Boot release
System for mechanical unlocking of the boot in   the   event   of   a   battery   or   central   locking  
m

alfunction.
Unlocking
F Fold   the   rear   seat   backrest   to   gain   access  t
o   the   lock   from   inside   the   boot.
F
 
U
sing   a   screwdriver   protected   by   a   cloth,  
r

emove   the   4   fixing   clips,   then   the   boot  
t

rim.
F
 
M
ove   the   trigger   to   the   right   to   unlock   the  
t

ailgate.
Access

41
C1_en_Chap02_ouvertures_ed01-2016
Rear quarter windows
Opening
Closing
F Tilt  the   lever   outwards.
F  P ush   it   fully   to   secure   the   window   in   the  
ope

n
 p
osition.
F
 
P
ull   the   lever   to   release   the   window.
F
 
T
ilt   the   lever   fully   inwards   to   secure   the  
w

indow   in   the   closed   position.
On
  the   5 -door   versions,   system   for   ventilation  
o

f   the   rear   seats   by   the   partial   opening   of   the  
w

indow.
Front electric windows*
The driver has controls for both front w
indows.
The
  electric   windows   do   not   work   with  
t

he   ignition   off.
1.
 L

eft
 
hand
 
front
 
electric
 
window.
2.
 R

ight
 
hand
 
front
 
electric
 
window.
After
 
the
 
ignition
 
has
 
been
 
switched
 
on,
 
press
 
o

ne of the control switches to open or pull to
close
 
the
 
window.
 
The
 
window
 
stops
 
when
 
you
 
r

elease
 
the
 
control
 
switch.
*
 
Depending
 
on
 
version. Closing
  the   windows   can   cause   serious  
in

jury.
Ensure
  that   nothing   is   preventing  
t

he   closing   of   the   windows   and   take  
p

articular   care   with   children.
2
Access

42
C1_en_Chap02_ouvertures_ed01-2016
* Depending on version.
Y our   vehicle   may   be   fitted   with   an   electrically   operated   fabric   roof.
Electric fabric ro
of*
Electric opening and closing
The roof is opened and closed by pressing t
he   control   at   the   interior   lamp,   in   the   opening  
d

irection
 1
  and   in   the   closing   direction   2.
In order to maintain the state of charge of t
he   battery,   it   is   recommended   that   the   roof b

e   operated   with   the   engine running.
Operation of the roof is possible with
the
  ignition   on   and   when   driving.
Operation
  of   the   roof   could   cause  
s

erious   injuries:   before   operating   the  
r

oof, ensure that no occupant of the
vehicle
  or   person   outside   the   vehicle  
c

ould   be   subject   to   any   risk   related  
t

o   the   movement   of   the   roof   and   that  
n

o   object   could   inter fere   with   the  
ope

ration.
During
  operation   of   the   roof   with   just  
t

he   ignition   on,   starting   the   engine   may  
c

ause   the   roof   to   stop,   depending   on  
t

he   state   of   charge   of   the   battery.   To  
h

ave the roof continue the operation,
operate
  the   control   again   after   the  
e

ngine   has   started.
The
 
asymmetric
 
shape
 
of
 
the
 
opening
 
c

ontrol
 
avoids
 
closing
 
the
 
roof
 
by
 
m

istake.
Position of the roof
Position 0 :   Roof   completely   closed.
Position 1 : 
 A utomatic   stop   position   for 
t
he   roof.
Position 2 :
  Roof   completely   open.
Access

43
C1_en_Chap02_ouvertures_ed01-2016
Opening
F Briefly  press   the   control   in   the   opening  d
irection   to   open   the   the   roof   in   stages.
or
F
 
P
ress   and   hold   the   control   in   the   opening  
d

irection,   until   the   manoeuvre   is   complete,  
t

o   open   the   roof   completely.
 P

ressing   again   stops   the   movement   of  
the
  roof.
Closing
F Briefly   press   the   control   in   the   closing  d
irection   to   open   the   the   roof   in   stages.
or
F
 
P
ress   and   hold   the   control   in   the   closing  
d

irection,   until   the   manoeuvre   is   complete,  
t

o close the roof to position 1 .
 P

ressing   again   stops   the   movement   of  
t

he roof.
F
 
T
o   close   the   roof   completely,   press   and  
h

old   the   control   (between   positions   1
and
  0)
  until   the   roof   locks   closed.
The
  closing   manoeuvre   of   the   roof  
c

ould   cause   serious   injuries:   take  
p

articular   care   with   children.
If
  the   roof   does   not   close   correctly:
-
 
c
heck   that   nothing   is   blocking   the   roof  
(

ignition
 o
ff),
-
 
r
epeat   the   closing   command   (with   the  
e

ngine
 r
unning).
If
  the   problem   persists,   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Operating fault
In the event of an electrical fault,
contact  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Protection of the electric motors
used for opening and closing the
roof
Following repeated opening and closing of the roof,   the   electric   motors   may   become   too   warm  
a

nd   no   longer   allow   the   roof   to   be   opened   or  
c

losed.   Allow   the   motors   to   cool   down   with   no  
o

peration   of   the   roof   for   10   minutes.
2
Access

44
C1_en_Chap02_ouvertures_ed01-2016
An aero-acoustic deflector is available to improve   the   acoustic   comfort   of   occupants   of  
t

he   vehicle   in   certain   driving   conditions  
(high
  speed),   by   reducing   the   turbulence   in  
t

he   passenger   compartment   resulting   from   the  
d

isplacement   of   air.
On
  opening   the   roof,   the   aero-acoustic  
d

eflector   is   deployed.
On
  closing   the   roof,   the   deflector   folds   away  
au

tomatically.
Aero-acoustic deflector Precautions for use
Never place objects on the roof, w
hether   open   or   closed.
Never
  sit   on   or   place   objects   on   the  
t

ransverse roof support when the roof
is
  open. In
  the   event   of   prolonged   storage   of   the  v
ehicle   outside,   it   is   recommended   that  
t

he   roof   be   protected   with   a   cover.
To
  avoid   damaging   the   roof,   do  
n

ot   open   it   under   snowy   or   frosty  
c

onditions.
Never
  use   sharp   tools   to   remove   ice   or  
a

ccumulations   of   snow   on   the   roof.
To
  limit   the   creation   of   folds   in   the   roof  
f

abric,   it   is   recommended   that   the   roof  
n

ot   be   left   open   for   long   periods.
The
  vehicle's   air   conditioning   system  
s

hould   not   be   operated   while   the   roof  
i

s   open. It
  is   recommended   that   the   roof   be  
c

losed   when   the   vehicle   is   left   parked.
Even
  if   the   roof   is   closed,   it   is   prudent  
n

ot   to   leave   any   valuable   objects   inside  
t

he   vehicle.
When you leave the vehicle, switch off
the
  ignition   and   remove   the   key   (take  
t

he   electronic   key   with   you)   to   avoid   any  
u

nwanted   operation   of   the   roof.
Access

45
C1_en_Chap02_ouvertures_ed01-2016
Recommendations on care of your vehicle
The general recommendations on the care of your vehicle are given in the maintenance and warranty guide.
Fabric roof
To avoid damaging the roof.
-  n ever   use   a   high   pressure   jet   wash,
-
 
n
ever   wash   your   vehicle   in   an  
a

utomatic   roller-brush   car   wash.Remove
  bird   droppings   or   tree   resins   as  
t

heir   acidity   may   damage   the   roof.Never
  use   chemical   products,  
d

etergents,   stain   removers,   solvents,  
a

lcohol,   petrol, ...   to   clean   the   roof.
We   recommend   that   you   clean   the  
a

ero-acoustic   defector   with care
 
using  
a

  soft   brush.
Before
  washing   the   fabric   roof,   first  
r

emove   as   much   dirt   as   possible   from  
t

he   sur face   using   a   soft   brush   or   a  
v

acuum   cleaner.
To waterproof the roof, use only special
waterproofing   products   for   fabric   roofs.
To
  remove   marks,   sponge   them  
(but   never   rub   them)   using   soapy   water,  
t

hen   immediately   rinse   with   clean   water.
Allow   the   vehicle   to   dry   in   a   shaded  
a

rea   and   avoid   direct   exposure   to  
t

he sun. For
  the   regular   maintenance   of   the  
f

abric   roof   and   to   conserve   its   original  
a

ppearance,   we   recommend   an  
e

cological   "Fly   remover   -   Fabric   roof  
c

leaner"   from   the   "TECHNATURE"  
r

ange.   To   obtain   this   product   go   to   a  
C

ITROËN   dealer.
Aero-acoustic deflector
2
Access

46
C1_en_Chap03_ergonomie-confort_ed01-2016
Front seats with manual adjustments
F Raise  the   control   and   slide   the   seat  f
or wards   or   backwards. F
 P ull   the   control   upwards   to   raise   or   push  i
t   downwards   to   lower,   as   many   times   as  
r

equired,   to   obtain   the   position   required.
F
 T ake   the   weight   of   the   backrest   with   your  b
o dy.
F
 
T
urn   the   knob   to   obtain   the   desired   angle.
Forwards-backwardsDriver's seat height*
Seat backrest angle
As a safety measure, seat adjustments should only be carried out when stationary.
B efore   moving   the   seat   backwards,   ensure   that   there   is   nothing   that   might   prevent   the   full  
t

ravel   of   the   seat,   so   as   to   avoid   the   risk   of   jamming   the   seat   caused   by   the   presence   of  
o

bjects   on   the   floor   behind   the   seat   or   rear   passengers.   If   the   seat   jams,   stop   the   movement  
i

mmediately. *
  Depending   on   version.
Ease of use and comfort

47
C1_en_Chap03_ergonomie-confort_ed01-2016
Ensure that no person or object prevents   the   seat   slide   from   returning   to  
it

s
 in
itial
 p
osition.
Check
  that   the   seat   belt   has   reeled   in  
c

orrectly   so   as   to   not   impede   access   for  
p

assengers   to   the   rear   seats.
Heated seat control Access to the rear seats
(3-door)
F Pull  this   control   toward   you   to   fold   the   seat  b
ack   and   move   the   seat   for ward.
When
  returning   the   seat   to   its   initial   position,  
g

uide   it   back   until   the   seat   and   backrest   lock  
i

nto   place.
With
 
the
 
engine
 
running,
 
the
 
front
 
seats
 
can
 
be
 h
eated s
eparately.
F
 
P

ress
 
the
 
control
 
switch.
 T

he
 
indicator
 
lamp
 
comes
 
on.
F
 
P

ressing
 
the
 
switch
 
again
 
stops
 
the
 
hea

ting.
The
 
temperature
 
is
 
controlled
 
automatically.
The
 
seat
 
heating
 
function
 
is
 
deactivated
 
about
 
t

wo
 
minutes
 
after
 
switching
 
off
 
the
 
ignition.
 
To
 
r

eactivate
 
it,
 
switch
 
the
 
ignition
 
on
 
and
 
press
 
t

he
 
control
 
switch
 
again. Switch
 
the
 
seat
 
heating
 
off
 
as
 
soon
 
a

s
 
it
 
is
 
no
 
longer
 
needed,
 
as
 
reducing
 
t

he
 
vehicle's
 
electrical
 
current
 
demand
 
r

educes
 
fuel
 
consumption.
3
Ease of use and comfort

48
C1_en_Chap03_ergonomie-confort_ed01-2016
Your vehicle is fitted with a fixed one-piece cushion bench rear seat, and depending on version:
-  a   folding   split   (50/50)   backrest,
-
 
a
  folding   one-piece   backrest.
When
  not   in   use,   or   before   folding   the   seat  
b

ackrest(s),   stow   the   rear   seat   belts   by  
i

nserting
 t
heir
 t
ongues
 i
n
 t
he
 d
edicated
 h
olders,
 l

ocated   on   the   side   pillars. The
  seat   backrest   is   folded   from   the   rear   of   the  
v

ehicle,   with   the   boot   open.
F
 
P
lace   the   head   restraints   in   the   low  
p

osition.
 R

efer   to   the   "rear   head   restraints"   section.
F
 
P
ull   the   strap(s)   A,
  located   behind   the   seat  
b

ackrest(s)   to   release   them,   and   lay   them  
o

n   the   seat   cushion.
Rear seats
Stowing the seat belts Folding the seat backrest
F Unfold  the   backrest   to   the   rear   and   engage  i
t   on   the   anchorage   B.
F
 
E
nsure   that   the   seat   back   has   locked   in  
p

lace   correctly.
Returning the backrest of the
bench seat to its initial position
3-door 5-door
Ease of use and comfort