engine Citroen C1 RHD 2016 1.G Workshop Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: C1 RHD, Model: Citroen C1 RHD 2016 1.GPages: 268, PDF Size: 7.09 MB
Page 151 of 268

149
Topping-up the engine oil
Oil grade
The oil  must  be  the  correct  grade  for  your Â
e
ngine  and  conform  to  the  manufacturer's Â
r
ecommendations.
Refer
 to  the  under-bonnet  view  for  the  location Â
o
f  the  oil  filler  cap  on  your  vehicle.
F
U
nscrew the filler cap for access to the
filler
 orifice.
F
Â
P
our  in  the  oil  in  small  quantities,  avoiding Â
s
pills  onto  the  engine  (risk  of  fire).
F
Â
W
ait  a  few  minutes  before  checking  the Â
l
evel  again  using  the  dipstick.
F
Â
T
op-up  again  if  necessary.
F
Â
A
fter  checking  and  topping  up,  carefully Â
r
efit  the  oil  filler  cap  and  the  dipstick  to  its Â
h
ousing.
Engine oil change
Refer to the manufacturer's service schedule for  details  of  the  interval  for  this  operation.
In
 order  to  maintain  the  reliability  of  the  engine Â
a
nd  emissions  control  system,  never  use Â
a
dditives  in  the  engine  oil.
Coolant level
The coolant level must be:
-  b etween  the  "FULL " or "F"
 and Â
"LO
W" or " L"
 marks  for  VTi  68 Â
a
nd  VTi  68  S&S  engines,
In
Â
addition,  as  the  cooling  system  is  pressurised,
 w
ait
Â
at
Â
least  one  hour  after  switching  off  the
 e
ngine
Â
before  carrying  out  any  work.
To
Â
avoid
Â
any  risk  of  scalding,  unscrew  the  cap
 b
y
Â
two
Â
turns  to  allow  the  pressure  to  drop.  When
 t
he
Â
pressure  has  dropped,  remove  the  cap  and
 t
op
Â
up
Â
the
 level.
Fluid specification
The coolant must conform to the ma nufacturer's r ecommendations.
The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades. - Â
b
etween  the  "
MIN "  and  "
MAX "  marks  for Â
t
he  PureTech  82  engine.
When  the  engine  is  warm,  the  temperature  of Â
t
he  coolant  is  regulated  by  the  fan.
7
Practical information
Page 153 of 268

151
Checks
12 V battery
The battery does not require any maintenance.
H owever,  check  regularly  that  the  terminals a
re  correctly  tightened  (versions  without  quick
 r
elease  terminals)  and  that  the  connections
 a
re  clean.Refer to the manufacturer's service  schedule  for  details  of  the Â
r
eplacement  intervals  for  these Â
c
omponents.
Air filter and passenger compartment filter
Replace the oil filter each time the e ngine  oil  is  changed.
Refer
 to  the  manufacturer's Â
s
ervice  schedule  for  details  of Â
t
he  replacement  interval  for  this Â
c
omponent.
Oil filter
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise,  have  them  checked  by  a  CITROËN  dealer  or  a  qualified  workshop.
Depending
 on  the  environment  (e.g.  dusty Â
a
tmosphere)  and  the  use  of  the  vehicle Â
(e.g.
 city  driving),  replace them twice as often
if necessary .
A
 clogged  passenger  compartment  filter  may Â
h
ave  an  adverse  effect  on  the  per formance Â
o
f  the  air  conditioning  system  and  generate Â
u
ndesirable
 o
dours.
When
 carrying  out  any  operation  on  the Â
12
 V  battery,  refer  to  the  corresponding  section Â
f
or  details  of  the  precautions  to  be  taken  before Â
s
tarting  work.
Manual gearbox
The gearbox does not require any maintenance  (no  oil  change).
Refer
 to  the  manufacturer's  service Â
s
chedule  for  the  checking  interval  for Â
t
his
 c
omponent.
Clutch
The clutch is operated mechanically and requires r egular a djustment.
Refer
 to  the  manufacturer's  service  schedule Â
f
or  information  on  when  the  adjustment  should Â
be c
hecked.In
 the  event  of  an  operating  fault Â
(
difficulty  moving  off,  for  example), Â
c
ontact  a  CITROËN  dealer  or  a Â
q
ualified
 w
orkshop.
Versions
Â
equipped
Â
with
Â
Stop
Â
&
Â
Start
Â
are
Â
f
itted
Â
with
Â
a
Â
12
Â
V
Â
lead-acid
Â
battery
Â
of
Â
s
pecific
 t
echnology
 a
nd
 s
pecification.
Its
Â
replacement
Â
should
Â
be
Â
carried
Â
out
Â
o
nly
Â
by
Â
a
Â
CITROËN
Â
dealer
Â
or
Â
a
Â
qualified
 w
orkshop.
7
Practical information
Page 154 of 268

152
ETG gearbox
The ETG gearbox does not require any  maintenance  (no  oil  change).
Refer
 to  the  manufacturer's  service Â
s
chedule  for  the  checking  interval  for Â
t
his
 c
omponent.
Brake
 wear  depends  on  the  style Â
o
f  driving,  particularly  in  the  case Â
o
f  vehicles  used  in  town,  over  short Â
d
istances.  It  may  be  necessary  to Â
Brake pads
For information on checking brake disc  wear,  contact  a  CITROËN  dealer Â
o
r  a  qualified  workshop.
Brake disc wearOnly use products recommended by CITROËN  or  products  of  equivalent Â
q
uality
 an
d
 sp
ecification.
In
 order  to  optimise  the  operation  of Â
u
nits  as  important  as  those  in  the Â
b
raking  system,  CITROËN  selects  and Â
o
ffers  very  specific  products.
After
 washing  the  vehicle,  dampness, Â
o
r  in  wintry  conditions,  ice  can  form Â
o
n  the  brake  discs  and  pads:  braking Â
e
fficiency  may  be  reduced.  Make  light Â
b
rake  applications  to  dry  and  defrost Â
t
he  brakes.
Parking brake
If excessive travel or a loss of effectiveness  of  this  system  is Â
n
oticed,  the  parking  brake  must  be Â
c
hecked,
 e
ven
 b
etween
 t
wo services.
Checking
Â
this  system  must  be  done  by  a Â
C
ITROËN
 dealer  or  a  qualified  workshop.
have
Â
the
Â
condition
Â
of
Â
the
Â
brakes
Â
checked,
Â
even
Â
b
etween
 v
ehicle
 s
ervices.
Unless
Â
there
Â
is
Â
a
Â
leak
Â
in
Â
the
Â
circuit,
Â
a
Â
drop
Â
in
Â
t
he
Â
brake
Â
fluid
Â
level
Â
indicates
Â
that
Â
the
Â
brake
Â
p
ads
Â
are
Â
worn. To
 avoid  damaging  the  electrical  units, Â
n
ever use  a  high  pressure  jet  wash  in Â
t
he  engine  compartment.
Practical information
Page 173 of 268

171
FuseN° Rating
(A) Functions
11 5Steering
 lock  -  Fuel  injection  system  -  Electronic  gearbox
12 7. 5Airbags
13 5Instrument
 panel  -  Display  Screen  -  Stop  &  Start
14 15
**
Steering
 -  Fuel  injection  system  -  Brake  lamps
7. 5 *
15 7. 5 * *
Fuel
 injection  system  -  Stop  &  Start
10*
16 7. 5Engine
 d
iagnosis
17 10Brake
 lamps  -  Third  brake  lamp  -  Fuel  injection  system  - ABS Â
s
ystem  -  VSC  system  -  Electronic  gearbox  -  Keyless  Entry  and Â
S
tarting  system
18 10Sidelamps
 -  Number  plate  lamps  -  Rear  foglamp  -  Rear  lamps - Â
L
ighting  dimmer
19 40Air
 c
onditioning
*
Â
PureTech  82  engine.
**
Â
VTi  68  engine.
8
In the event of a breakdown
Page 174 of 268

172
FuseN° Rating
(A) Functions
20 40Air
 conditioning  -  Engine  self-diagnosis  -  Sidelamps  -  Number Â
p
late  lamps  -  Rear  foglamp  -  Rear  lamps  -  Lighting  dimmer  - Â
B
rake  lamps  -  Third  brake  lamp  -  Fuel  injection  system  -  ABS Â
s
ystem  -  VSC  system  -  Electronic  gearbox  -  "Keyless  Entry  and Â
S
tarting"  system  -  Electric  windows
21 30Fuel
 injection  system  -  Stop  &  Start  -  Main  distribution  unit
22** 7, 5Fuel
 injection  system
23** 20Fuel
 injection  system  -  Stop  &  Start
24 25Main
 distribution  unit
25 30Electric
 windows
26 25Electric
 windows
27 10Air
 c
onditioning
28 5Rear
 fo
glamp
**
Â
VTi  68  engine.
In the event of a breakdown
Page 175 of 268

173
Fuse
N° Rating
(A) Functions
1 10Right
 hand  dipped  beam
2 10Left
 hand  dipped  beam  -  Headlamp  adjustment
3 7. 5Right
 hand  main  beam
4 7. 5Left
 hand  main  beam
5 * 15Fuel
 injection  system
6 * 7. 5Fuel
 injection  system
7 * 15Fuel
 injection  system
8 * 7. 5Cooling
 fan
9 7. 5Air
 c
onditioning
10 ** 7. 5Fuel
 injection  system  -  Brake  lamps  -  Third  brake  lamp
11 5Courtesy
 lamp  -  Boot  lamp
12 10
Direction indicators - Hazard warning lamps - Instrument panel - Display screen
Fuses under the bonnet
F Unclip the  fusebox  cover  by  pressing  on  t
he  lug  on  the  right,  for  access  to  the  fuses.
When
 you  have  finished,  carefully  refit  the Â
c
ove r.
*
 PureTech  82  engine.
**
 VTi  68  engine.
8
In the event of a breakdown
Page 176 of 268

174
** VTi 68 engine.F use
N° Rating
(A) Functions
13 10Horn
14 30Distribution units
15 ** 7. 5Electronic
 g
earbox
16 7. 5Fuel  injection  system
17 7. 0Keyless  Entry  and  Starting  system
18 ** 7. 5Battery
19 25Fuel  injection  system  -  Cooling  fan
20 30Starter  motor
21 7. 5Steering  lock
22 25Front  lamps
23 7. 5Fuel  injection  system
24 7. 5Fuel  injection  system  -  Starter  motor  -  Electronic  gearbox  - Â
St
op
& Start
25 15Audio  system  -  "Keyless  Entry  and  Starting"  system
26 7. 5Instrument  panel  -  Display  screen
In the event of a breakdown
Page 177 of 268

175
FuseN° Rating
(A) Functions
27 7. 5VSC
 system
28 60Passenger
 c
ompartment
 f
usebox
29** 125***Heated
 rear  screen  and  door  mirror  heating  -  Electric  fabric Â
r
oof  -  ABS  system  -  VSC  system  -  Cooling  fan  -  LED  daytime Â
r
unning
 lam
ps
30 50
Electronic
 g
earbox
40 Stop & Start
31 50Power
 s
teering
32 50*
Cooling
 fan
30
40
33 50ABS
 system  -  VSC  system
34 10Spare fuse
*
Â
PureTech
Â
82
Â
engine.
**
Â
VTi
Â
68
Â
engine.
***
 Â
T
his
Â
fuse
Â
must
Â
be
Â
replaced
Â
only
Â
by
Â
a
Â
C
ITROËN
Â
dealer
Â
or
Â
a
Â
qualified
Â
workshop.
8
In the event of a breakdown
Page 179 of 268

177
12Â VÂ battery
The battery is located under the bonnet.
F or  access  to  the  (+)  terminal:
F
Â
r
elease  the  bonnet  using  the  interior  lever, Â
t
hen  the  exterior  safety  catch,
F
Â
r
aise  the  bonnet  and  secure  it  with  its  stay,
F
l
ift the plastic cover for access to the
(+)
 t
erminal.
Access to the battery
Procedure for starting the engine using another battery or charging a discharged battery.
Before doing any work
Immobilise the vehicle: apply the parking  brake,  put  the  gearbox  in Â
n
eutral,  then  switch  off  the  ignition.
Check
 that  all  electrical  equipment  is Â
s
witched  off.
The presence of this label, in particular
with
Â
the
Â
Stop
Â
&
Â
Start
Â
system,
Â
indicates
Â
t
he
Â
use
Â
of
Â
a
Â
12
Â
V
Â
lead-acid
Â
battery
Â
with
Â
s
pecial
 t
echnology
 a
nd
 s
pecification;
 t
he
Â
involvement
Â
of
Â
a
Â
CITROËN
Â
dealer
Â
o
r
Â
a
Â
qualified
Â
workshop
Â
is
Â
essential
Â
w
hen
Â
replacing
Â
or
Â
disconnecting
Â
the
Â
b
attery. After
 refitting  the  battery,  the  Stop  &  Start
Â
s
ystem  will  only  be  active  after  a
 c
ontinuous  period  of  immobilisation  of  the
 v
ehicle,  a  period  which  depends  on  the
 c
limatic  conditions  and  the  state  of  charge
 o
f  the  battery  (up  to  about  8  hours).Do not push the vehicle to start the
engine
 if  you  have  an  ETG  electronic Â
g
earbox.
General points
Lead-acid starter batteries
Batteries contain harmful substances such  as  sulphuric  acid  and  lead.
They
 must  be  disposed  of  in Â
a
ccordance  with  regulations  and  must Â
n
ot,  in  any  circumstances,  be  discarded Â
w
ith  household  waste.
Take
 used  remote  control  batteries  and Â
v
ehicle batteries to a special collection
point. Protect
 your  eyes  and  face  before  h
andling  the  battery.
All
 operations  on  the  battery  must  be Â
c
arried  out  in  a  well  ventilated  area  and Â
a
way  from  naked  flames  and  sources Â
o
f  sparks,  so  as  to  avoid  the  risk  of Â
e
xplosion  or  fire.
Wash
 your  hands  after wards.
8
In the event of a breakdown
Page 180 of 268

178
Starting using another battery
F Start the  engine  of  the  vehicle  with  the  g
ood  battery  and  leave  it  running  for  a  few Â
m
inutes.
F
Â
O
perate  the  starter  on  the  broken  down Â
v
ehicle  and  let  the  engine  run.
If
 the  engine  does  not  start  straight  away, Â
s
witch  off  the  ignition  and  wait  a  few  moments Â
b
efore  trying  again.
Never
Â
try
Â
to
Â
start
Â
the
Â
engine
Â
by
 c
onnecting
Â
a
Â
battery
Â
charger.
Never
Â
use
Â
a
Â
24
Â
V
Â
or
Â
higher
Â
battery
Â
b
o o s t e r.
First
Â
check
Â
that
Â
the
Â
slave
Â
battery
Â
has
Â
a
Â
n
ominal
Â
voltage
Â
of
Â
12
Â
V
Â
and
Â
a
Â
capacity
Â
a
t
Â
least
Â
equal
Â
to
Â
that
Â
of
Â
the
Â
discharged
Â
b
attery.
The
Â
two
Â
vehicles
Â
must
Â
not
Â
be
Â
in
Â
contact
Â
w
ith
Â
each
Â
other.
Switch
Â
off
Â
the
Â
electrical
Â
consumers
Â
on
Â
b
oth
Â
vehicles
Â
(audio
Â
system,
Â
wipers,
Â
l
ighting,
 ...
).
Ensure
Â
that
Â
the
Â
jump
Â
lead
Â
cables
Â
do
Â
n
ot
Â
pass
Â
close
Â
to
Â
moving
Â
parts
Â
of
Â
the
Â
e
ngine
Â
(cooling
Â
fan,
Â
belts,
Â
...).
Do
Â
not
Â
disconnect
Â
the
Â
(+)
Â
terminal
Â
when
Â
t
he
Â
engine
Â
is
Â
running. F
Â
W
ait  until  the  engine  returns  to  idle  then Â
d
isconnect  the  jump  lead  cables  in  the Â
r
everse
 o
rder.
F
Â
R
efit  the  plastic  cover  to  the  (+)  terminal,  if Â
y
our  vehicle  has  one.
F
Â
A
llow  the  engine  to  run  for  at  least Â
3
0 minutes,  by  driving  or  with  the  vehicle Â
s
tationary, so that the battery reaches an
adequate
 state  of  charge.
When
Â
your
Â
vehicle's
Â
battery
Â
is
Â
discharged,
Â
the
Â
e
ngine
Â
can
Â
be
Â
started
Â
using
Â
a
Â
slave
Â
battery
Â
(
external
Â
or
Â
on
Â
another
Â
vehicle)
Â
and
Â
jump
Â
lead
Â
c
ables
Â
or
Â
a
Â
battery
Â
booster.
F
Â
R
aise
Â
the
Â
plastic
Â
cover
Â
on
Â
the
Â
(+)
Â
terminal,
Â
i
f
Â
your
Â
vehicle
Â
has
Â
one.
F
Â
C
onnect
Â
the
Â
red
Â
cable
Â
to
Â
the
Â
positive
Â
t
erminal
Â
(+)
Â
of
Â
the
Â
flat
Â
battery
Â
A
Â
(at
Â
t
he
Â
metal
Â
elbow)
Â
then
Â
to
Â
the
Â
positive
Â
t
erminal (+)
Â
of
Â
the
Â
slave
Â
battery
Â
B or the
b o o s t e r. F
Â
C
onnect  one  end  of  the  green  or  black Â
c
able  to  the  negative  terminal  (-)  of  the Â
s
lave battery B  or  the  booster  (or  earth Â
p
oint  on  the  other  vehicle).
F Â
C
onnect Â
t
he Â
o
ther Â
e
nd Â
o
f Â
t
he Â
g
reen Â
o
r Â
b
lack Â
c
able to the earth point C  on  the  broken Â
d
own  vehicle.
In the event of a breakdown