engine CITROEN C3 2009 Owners Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009, Model line: C3, Model: CITROEN C3 2009Pages: 209, PDF Size: 7.71 MB
Page 12 of 209

FAMILIARISATION
 MONITORING 
  Instrument panel  
   
A.    With  the  ignition  on,  the  fuel  gauge 
bars  for  the  fuel  remaining  should  
light up. 
  
B.    With the engine running, the associ-
ated  low  level  warning  lamp  should 
switch off. 
  
C.    With  the  ignition  on,  the  oil  level  in-
dicator should display   "OIL OK"  for 
a few seconds.  
 If  the  levels  are  not  correct,  top  up  the 
level which is low.  
  
 
    18       Warning lamps  
   
1.    With the ignition on, the orange and 
red warning lamps come on. 
  
2.    With  the  engine  running,  these 
warning lamps should switch off.  
 If  a  warning  lamp  remains  on,  refer  to  
the page concerned.  
  
 
    20       Switch panel  
 Lighting  of  the  indicator  lamp  indicates  
the  status  of  the  corresponding  func-
tion.  
   
A.    Activation of the electric child lock  
 
 
    89  
  or   
    Deactivation of the interior volumetric  alarm.   
    59   
  
B.    Deactivation of the ESP/ASR system.   
    92            
Page 14 of 209

FAMILIARISATION
  Speed limiter "LIMIT"  
   
1.    Selecting/Switching off speed limiter 
mode. 
  
2.    Decrease the programmed value. 
  
3.    Increase the programmed value. 
  
4.    Speed limiter on/off.  
  
 
    104    
 DRIVING SAFELY 
  Cruise control "CRUISE"  
   
1.    Selecting/Switching  off  cruise  con-
trol mode. 
  
2.    Decrease the programmed value. 
  
3.    Increase the programmed value. 
  
4.    Cruise control Off/Resume.  
  
 
    106    
 The values must be set with the engine  
running.    Display in the instrument panel  
 The cruise control or speed limiter mode  
appears  on  the  instrument  panel  when 
it is selected. 
 In order to be programmed or activated, 
the  vehicle  speed  must  be  higher  than 
25  mph  (40  km/h),  with  at  least  fourth 
gear  engaged  on  a  manual  gearbox 
(second  gear  on  an  automatic  gear-
box).    Cruise control   
  Speed limiter          
Page 15 of 209

1
INSTRUMENTS and CONTROLS
 Panel grouping together the vehicle operation indication  dials and warning lamps. 
PETROL - DIESEL MANUAL GEARBOX INSTRUMENT PANELS 
  
5.     Display management button     
  Servicing information.   
  Adjust the time and choose units.  
  Reset the service indicator. 
  
6.     Instrument panel lighting button.     
  Adjusts the brightness of the lighting  of the instruments and controls.  
 For  further  information,  refer  
to  the  paragraph  relating  to  the 
button or function and its associ-
ated display. 
  Dials  
   
1.     Rev counter.     
  Indicates the speed of rotation of the  engine (x 1 000 rpm). 
  
2.     Vehicle speed.     
  Indicates  the  current  speed  of  the  moving vehicle (mph or km/h). 
  
3.     Fuel level.     
  Indicates the quantity of fuel remain- ing in the tank. 
  
4.     Screen.       
A.     Ambient temperature.     
  (°Celsius or °Fahrenheit)  
  
B.     Gear change indicator.   
  
C.     Time.   
  
D.     Engine oil level indicator.     
  Appears  a  few  seconds  after  switch- ing on the ignition, then disappears. 
  
E.     Trip computer.   
  
F.    Service indicator    
  (miles or km) then,  
    Total mileage.     
  These  two  functions  are  displayed  successively when switching on the  
ignition.    
  Screen     
Page 16 of 209

1
INSTRUMENTS and CONTROLS
PETROL - DIESEL MANUAL OR AUTOMATIC GEARBOX 
INSTRUMENT PANELS 
 Panel  grouping  together  the  vehicle  operation  indication  dials  and  warning  lamps. 
Depending on the version, the instrument panel may  have permanent back-lighting. 
  Dials  
   
1.     Rev counter.     
  Indicates the speed of rotation of the  engine (x 1 000 rpm). 
  
2.     Vehicle speed.     
  Indicates  the  current  speed  of  the  moving vehicle (km/h or mph). 
  
3.     Fuel level.     
  Indicates the quantity of fuel remaining  in the tank. 
  
4.     Screen.      
5.     Display management button     
  Alternates  display  between  range  and trip mileage recorder.  
  Servicing information.   
  Resets the selected function to zero  (trip  distance  recorder  or  service  
indicator). 
  
6.     Instrument panel lighting button.     
  Adjusts the brightness of the lighting  of the instruments and controls.  
 For  further  information,  refer 
to  the  paragraph  relating  to  the 
button or function and its associ-
ated display.     
A.     Speed limiter     
  (mph or km/h) or   
    Cruise control.   
  
B.     Gear change indicator.   
  
C.     Automatic gearbox information.   
  
D.     Range     
  (miles or km) or  
    Trip mileage recorder.   
  
E.     Service   
 indicator     
  (miles or km), then   
    Total mileage recorder     
  These  two  functions  are  displayed  successively when switching on the  
ignition 
  
F.      Engine oil level indicator     
  Appears a few seconds after switch- ing on the ignition, then disappears.    
  Screen     
Page 17 of 209

1
INSTRUMENTS and CONTROLS
         Indicator and warning lamps  
 Visual  indicators  informing  the  driver  that  a  system  is  in  operat ion  (operation  or 
deactivation indicator lamps) or of the occurrence of a fault (wa rning lamp). 
  When the ignition is switched on  
 Certain  warning  lamps  come  on  for  a  few  seconds  when  the  vehi cle's  ignition  is 
switched on.  
 When the engine is started, these same warning lamps should  switch off. 
 If they remain on, before moving off, refer to the informati on on the warning lamp 
concerned.   
  Operation indicator lamps  
   I f   o n e   o f   t h e   f o l l o w i n g   i n d i c a t o r   l a m p s   c o m e s   o n ,    t h i s   c o n fi   r m s   t h a t   t h e   c o r r e s p o n d i n g  
system has come into operation.     The  warning  lamps  may  come  
 o n   c o n t i n u o u s l y   ( fi   x e d )   o r   fl   a s h .   
 Certain  warning  lamps  may  
come on in two different modes. 
Only by relating the type of light-
ing to the operating status of the 
vehicle  can  it  be  ascertained 
whether  the  situation  is  normal 
or whether a fault has occurred.  
  Associated warnings  
 The  switching  on  of  certain  warning  lamps  may  be  accompanied  b y  an  audible 
signal and a message on the multifunction screen. 
   Warning lamp          
is on           Cause       Action/Observations   
        
Left-hand 
direction  
  
indicato   
r          fl   a s h i n g   w i t h  
buzzer.    The lighting stalk is pressed 
down. 
  
        
Right-hand 
direction 
indicator         fl   a s h i n g   w i t h  
buzzer.    
The lighting stalk is pushed up.   
        
Sidelamps         fi   x e d .      The lighting stalk is in the 
"Sidelamps" position.   Turn the control to the desired position. 
        
Dipped beam 
headlamps         fi   x e d .      The lighting stalk is in the 
"Dipped beam headlamps" 
position.   Turn the control to the desired position.