fuse box diagram CITROEN C3 2023 Owners Manual

48
In the event of a breakdown
Changing a fuse
Access to the tools

The puller is located inside the engine fuse box.
► Open the bonnet.
►

Disengage the cover completely
.
►

T
ake the puller from its housing.
Changing a fuse
Before changing a fuse:
► Identify the cause of the fault and fix it.
►

Switch off all power consumption.
►


Identify the defective fuse using the current
allocation tables and diagrams.
T

o replace a fuse, it is essential to:
►

Use the special puller to extract the fuse
from its housing and check the condition of its
filament.
► Always replace the failed fuse with a fuse of
the same rating (same colour); use of a different
rating may cause malfunctions - risk of fire!
If the fault recurs soon after replacing a fuse,
have the electrical system checked by a
CITROËN dealer
.
The fuse allocation tables and the corresponding diagrams are available
from a CITROËN dealer.
The replacement of a fuse not shown in the allocation tables may cause a serious
malfunction of the vehicle. Contact a
CITROËN dealer.


Good
Faulty

Puller
Installing electrical accessories
The vehicle's electrical system is
designed to operate with standard or optional
equipment.
Before installing other electrical equipment
or accessories to your vehicle, contact a
CITROËN dealer.
CITROËN accepts no responsibility for
the cost incurred in repairing the vehicle
or for rectifying malfunctions resulting from
the installation of accessories not supplied or
not recommended by CITROËN and not
installed in accordance with its
recommendations, in particular when the
combined power consumption of all of the
additional equipment connected exceeds 10
milliamperes.
Dashboard fuses
The fusebox is placed in the lower dashboard
(right-hand side).
Access to the fuses