clock CITROEN C3 AIRCROSS 2020 Owners Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2020, Model line: C3 AIRCROSS, Model: CITROEN C3 AIRCROSS 2020Pages: 308, PDF Size: 9.13 MB
Page 172 of 308

170
F The star wheel 6 turns a quarter of a turn anti-clockwise; take care to keep your
hands clear!
F
C
heck that the mechanism has correctly
locked into place and that the green mark
on the star wheel is in line with the white
mark on the towball (position A ).
F
C
lose the lock 7 using the key.
F
A
lways remove the key. The key cannot be
removed when the lock is open.
F
C
lip the cap onto the lock.
Removing the towball
F Remove the protective cover from the towball.
F
A
ttach the trailer to the towball.
F
A
ttach the cable on the trailer to the safety
eye 4 on the carrier.
F
T
ilt the connection socket 3 for wards to
place it in position.
F
I
nsert the trailer plug and give it a quarter
turn to connect it to the connection socket 3
of the carrier. F
G
ive a quarter turn and pull the trailer plug
to disconnect it from connection socket 3 of
the carrier.
F
T
ilt the connection socket 3 to the left to
stow it away.
F
D
etach the cable on the trailer from the
safety eye 4 on the carrier.
F
D
etach the trailer from the towball.
F
R
efit the protective cover to the towball.
Practical information
Page 173 of 308

171
F Hold the towball 5 firmly in one hand; using the other hand, pull and turn star wheel 6
fully in a clockwise direction; do not release
the star wheel.
F
R
emove the cap from the lock.
F
I
nsert the key into the lock 7
.
F
O
pen the lock using the key.
F Extract the towball from the bottom of its
carrier 1.
F
R
elease the star wheel; this automatically stops
in the unlocked position and the red mark on
the star wheel lines up with the white mark on
the towball (position B ).
Maintenance
Correct operation is only possible if the towball
and its carrier are kept clean.
Before cleaning the vehicle with a high-
pressure jet wash, the towball must be removed
and the protective plug fitted to the carrier.
Apply the label provided to a clearly visible
area, close to the carrier or in the boot.
Go to a CITROËN dealer or a qualified
workshop for any work on the towbar
system.
F
R
efit protective plug 2 to carrier 1
.
F
C
arefully stow the towball in its bag away
from knocks and dirt.
Towing device
Load distribution
F D istribute the load in the trailer so that
the heaviest items are as close as
possible to the axle and the nose weight
approaches the maximum permitted without
exceeding
it.
Air density decreases with altitude, thus
reducing engine performance. The maximum
load which can be towed must be reduced by
10% per 1,000
metres of altitude.
Use towing devices and their genuine
harnesses approved by CITROËN. It is
recommended that the installation be
per formed by a CITROËN dealer or a
qualified workshop.
If the towbar is not fitted by a CITROËN
dealer, it must still be fitted in accordance
with the vehicle manufacturer's
instructions.
Certain driving assistance or manoeuvring
assistance functions are automatically
disabled if an approved towbar is used.
7
Practical information
Page 184 of 308

182
Recommendations on storage
AdBlue® freezes at about -11°C and
deteriorates above 25°C. It should be stored in
a cool place and protected from direct sunlight.
Under these conditions, the fluid can be kept
for at least a year.
If the fluid has frozen, it can be used once
it has completely thawed out at ambient
temperature.
Never keep AdBlue
® containers in your
vehicle.
Procedure
In cold weather, before per forming the top-up,
ensure that the temperature is above -11°C.
Otherwise the AdBlue
® may be frozen and so
cannot be poured into the tank.
Park your vehicle in a warmer area for a few
hours to allow the top-up to be carried out. F
S
witch off the ignition and remove the key to
switch off the engine.
or
F
W
ith
K
eyless Entry and Starting, press the
" START/STOP " button to stop the engine.
F
W
ith the vehicle unlocked, open the fuel
filler flap.
F
T
urn the blue cap a quarter turn anti-
clockwise.
F
R
elease the blue cap.
Refilling
F Obtain an AdBlue® container. After first
checking the use-by date, read the
instructions on the label carefully before
pouring the contents of the container or
bottle into your vehicle's AdBlue tank. F
I
nsert the AdBlue
® pump nozzle and refill
the tank until the nozzle stops automatically.
Or
Important:
-
T
o avoid over flowing the AdBlue
® tank,
i
t is recommended:
•
T
o do a top-up of between 10 and
13
litres using AdBlue
® containers.
Or
•
I
f filling in a ser vice station, stop
after the first automatic shut-off of
the nozzle.
-
I
f your vehicle's AdBlue
® tank is
completely empty – which is confirmed
by the alert messages and the
impossibility of starting the engine –
you must add at least 5
litres.
Never top up from an AdBlue
® dispenser
reserved for heavy goods vehicles.
F
B
efore topping up, ensure that the vehicle is
parked on a flat and level sur face.
Practical information
Page 196 of 308

194
Daytime running lamps/sidelamps
Daytime running lamps/
sidelamps (LED)
For the replacement of this type of diode lamp,
contact a CITROËN dealer or a qualified
workshop. F
T
urn the bulb holder an eighth of a turn anti-
clockwise and extract it.
F
R
emove the bulb and replace it.
To refit the lamp, carry out these operations in
reverse order.
Direction indicators
Quicker flashing of the direction indicator
(left or right) indicates that one of the
lamps on the corresponding side has
failed.
F
T
urn the bulb holder an eighth of a turn anti-
clockwise and extract it.
F
R
emove the bulb and replace it.
To refit the lamp, carry out these operations in
reverse order. Amber colour bulbs, such as the direction
indicators, must be replaced by bulbs with
identical colour and specifications.
Dipped beam headlamps
To refit the lamp, carry out these operations
in reverse order, ensuring you position the
lamp lugs properly. F
R
emove the protective cover by
unscrewing
it.
F
D
isconnect the bulb connector.
F
E
xtract the bulb by pulling and replace it.
Main beam headlamps
In the event of a breakdown
Page 197 of 308

195
Integrated direction indicator
side repeaters
For the replacement of this type of lamp, contact
a CITROËN dealer or a qualified workshop.
Rear lamps
Changing bulbs
These bulbs are changed from outside the
boot.
1. Brake lamps/sidelamps (W21/5W).
2. Direction indicators (W Y21W).
3. Reversing lamp (P21W) or foglamp
(P21W ). F
I
dentify the defective lamp then open the
boot.
F
U
sing a thin, flat blade screwdriver, unclip
the two plastic covers, then flip them down.
F
U
nscrew the two fixing screws located in
each opening.
F
R
emove the protective cover by
unscrewing
it.
F
D
isconnect the bulb connector.
F
E
xtract the bulb by pulling and replace it.
To refit the lamp, carry out these operations
in reverse order, ensuring you position the
lamp lugs properly.
Foglamps
F Remove the protective cover by unscrewing it.
F
D
isconnect the bulb connector.
F
T
urn the lamp a quarter turn anti-clockwise,
pull it out and replace it.
To refit the lamp, carry out these operations in
reverse order.
8
In the event of a breakdown
Page 198 of 308

196
F Unclip the lamp unit and carefully extract it pulling straight towards the outside.
F
H
old the lamp unit and disconnect the
connector.
F
T
urn the bulb holder of the faulty bulb a
quarter turn anti-clockwise and pull it out.
F
R
emove the bulb and replace it.
To refit the lamp, carry out these operations in
reverse order.
Make sure to engage the lamp unit in its
guides while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.
Reversing lamp and foglamp
For the replacement of this type of bulb, contact
a CITROËN dealer or a qualified workshop.
Third brake lamp (LED)
For the replacement of this type of bulb, contact
a CITROËN dealer or a qualified workshop.
Number plate lamps (LED)
For the replacement of this type of bulb, contact
a CITROËN dealer or a qualified workshop.
Interior lighting
Courtesy lamps (W5W)
Front courtesy lamp
F Using a thin, flap blade screwdriver, unclip the entire console surrounding the courtesy
lamp.
Rear courtesy lamp
F Using a thin, flat blade screwdriver, unclip the courtesy lamp.
F
P
ull the faulty bulb out and change it.
F
P
ut in place the console around the
courtesy lamp and clip it correctly.
In the event of a breakdown