ESP Citroen C3 RHD 2013 2.G User Guide

2
Multifunction screens
51

*
According to country.


System language

This menu allows you to select the language
used by the display: Deutsch, English,Espanol, Français, Italiano, Nederlands, Polski,
Portugues, Türkçe * .

Date and time
This menu allows you to set the date and time,
the format of the date and the format of the
time:)Press "SETUP"

. )Select the "Date and time" function andpress the knob to confirm. )Select the "Adjust date and time" function and press the knob to confirm. )Adjust the settings in turn using the
directional arrows, confirming with the knob.)Select the "Date format" function and press
the knob to confirm.)Confirm the desired format using the knob. )Select the "Time format" function andpress the knob to confirm. )Confirm the desired format using the knob.

Display
This menu allows you to set the brightness of
the screen, the screen colour scheme and the colour of the map (day/night or auto mode).
Vehicle
This menu allows you to activate or deactivate cer tain driving and comfort equipment:
- wiper linked with reverse gear (refer to the "Visibility" section),
- guide-me-home lighting and duration(refer to the "Visibility" section),
- parking sensors (refer to the "Driving"section).


Units

This menu allows you to select the units:
temperature (°C or °F) and fuel consumption(km/l, l/100 or mpg).

System

This menu allows you to restore the factory configuration, display the software version and
activate scrolling text.

For safety reasons, configuration of the multifunction screen by the driver mustonly be done when stationary.

3
Comfort
57

















Digital air conditioning

The air conditioning operates when the engine is running, as well as in STOP mode with Stop & Star t.


Automatic operation


1. Automatic "comfort" programme
Press the "AUTO"
button.
The "AUTO"symbol is displayed.
We recommend that
you use this mode.
It provides optimised automatic control of
all of the following functions: passenger compartment temperature, air flow, air distribution and air intake, in accordance with
the comfort value that you have chosen.
This system is designed to operate effectivelyin all seasons, with the windows closed.
2. Temperature adjustment
The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
de
grees Celsius or Fahrenheit.
Pr
ess the ""
and ""
buttons to change this value. A setting around
the value 21 enables optimum comfor t to be obtained. However,depending on your requirements, asetting between 18 and 24 is usual.


3. Automatic "visibility" programme
The automatic comfor t programme may not be sufficient for rapid demisting or
defrosting of the windscreen and side
windows (humidity, several passengers,
ice, etc.).
In this case, select the automatic visibility
programme. The button
3 indicator lamp comeson.
The system automatically controls the air conditioning and the flow of air and provides optimum air distribution to the windscreen andside windows. It deactivates air recirculation 5
.
To exit this programme, press button 3
again or "AUTO"
, the indicator lamp on the button goes off and "AUTO"
is displayed.



Manual override

It is possible to adjust one or more functions
manually while leaving the other functions in automatic mode.
The "AUTO"symbol switches off.
To return to automatic mode, press the
"AUTO"button.
For your comfor t, when the engine isswitched off, the settings are retained until the engine is switched on again. To prevent too great a distribution of cold air when the engine is cold, the air flow will only reach its optimum level gradually.
On entering the vehicle, if the interior is very cold or hot, there is no need to change the value displayed in order to reach the required level of comfort.The system corrects the temperaturedifference automatically and as quickly as possible.
Switching to manual mode may not besuitable (temperature, humidity, odour, condensation) and does not provideoptimum comfort.

3
Comfort
63











Rear seats
Bench seat with fixed one-piece cushion and split backrest (right hand 2/3, left hand 1/3) to adjust the load space in the boot.


Rear head restraints Folding the backrest

They can also be removed. To remove a head restraint: )release the backrest using control 1,)tilt the backrest 2
slightly forwards, )pull the head restraint upwards to the stop, )then, press the lug A
.
)
Move the corresponding front seat for ward if necessary.)
Check that the seat belt is positioned correctly on the side of the seat backrest. )
Place the head restraints in the low position.


With passengers in the rear seats,
never drive with the head restraints removed; they must be in place and correctly adjusted. These have one position for use
(up) and a stowed position (down).
)
Pull control 1
forwards to release the seat backrest 2.)
Fold the seat backrest 2on to the cushion.



Repositioning the seat backrest


When repositioning the seat backrest,take care not to trap the seat belts.

)
Straighten the seat backrest 2
and secure it. )
Check that the red indicator, located next to
the control 1, is no longer visible.

Comfort
64





Mirrors
Each fitted with an adjustable mirror glasspermitting the lateral rearward vision necessary for overtaking or parking. They can also befolded for parking in confined spaces.

Adjustment
)
Move control Ato the right or to the left to select the corresponding mirror. )
Move control Bin all four directions toadjust. )
Return control Ato the central position.



Folding
)From outside: lock the vehicle using the
remote control or the key. )From inside: with the ignition on, with the control A
in the central position, pull itdownwards.


Unfolding
)From outside: unlock the vehicle using theremote control or the key. )From inside: with the ignition on, with the control A
in the central position, pull itdownwards.Demisting - Defrosting
If your vehicle is fitted with heated mirrors, the
demisting-defrosting operates with the engine running, by switching on the heated rear screen (refer to the "Rear screen demist-defrost"page).
Door mirrors
The objects obser ved are, in reality, closer than they appear.Take this into account in order to correctly judge the distance of vehicles
approaching from behind.


If the mirrors are folded using control A ,they will not unfold when the vehicle is unlocked. Pull again on control A.

The folding and unfolding of the door mirrors using the remote control can bedeactivated by a CITROËN dealer or a qualified workshop.
Never fold or unfold the electric foldingmirrors manually.

Access
74
Safety anti-pinch
The one-touch front electric windows are fittedwith a safety anti-pinch function.When the window rises and meets an obstacle, it stops and partially lowers again.
Deactivating the rear window and door switches
)
For the safety of your children, press switch 5to prevent operation of the rear
windows irrespective of their position.
With the lamp on, the rear controls aredeactivated.
With the lamp off, the rear controls are
activated.


Reinitialisation

In the event of a malfunction you have to
reinitialise the operation of the electric windows: )release the switch and pull it again until the
window closes completely,
)hold the switch for approximately
one second after closing,)press the switch to lower the windowautomatically. The safety anti-pinch function is not active
during these operations. In the event of unwanted opening of thewindow on closing (for example in the presence of frost): )press the switch beyond the point of resistance and then release it: thewindow opens completely,)then pull it immediately withoutpassing the point of resistance until
the window closes completely,)continue to hold the switch for approximately one second after thewindow has closed.The safety anti-pinch function is not active during these operations.

Always remove the key from the ignition when leaving the vehicle, even for a short time.
In the event of contact during operationof the windows, reverse the movement of the window. To do this, press theswitch concerned. When the driver operates the passenger electric window switches, they should ensure that no one is preventing correct closing of the windows.
The driver should ensure that passengers use the electric windows
correctly.
Be aware of children when operating the windows.
This control also deactivates the interior rear door controls (see "Childsafety - § Electric child lock").

Visibility
82














Lighting controls
Main lighting
The various front and rear lamps of the vehicleare designed to adapt the driver's visibility progressively according to climatic conditions:
- sidelamps, to be seen,
- dipped beam headlamps to see without
dazzlin
g other drivers,
- main beam headlamps to see clearly when
the road is clear.

Additional lighting
Other lamps are installed to fulfil therequirements of par ticular conditions of
visibility:
- a rear foglamp to be seen from afar,
- front fo
glamps for even better forward
vision.
Programming
Various automatic lighting control modes are also available according to the following
options:
-
guide-me-home lighting,
- automatic illumination of headlamps.




Model without AUTO lighting




Model with AUTO li
ghting



Lighting off / daytime runninglamps.
Automatic illumination of headlamps.
Sidelamps only.
Di
pped or main beam headlamps.
B. Stalk for switching the headlamp beam: pull the stalk to switch between dipped and main beam headlamps.
In the lamps off and sidelamps modes,
th
e driver can switch on the main beamheadlamps temporarily ("headlamp flash") by maintaining a pull on the stalk.

Displays

Lighting of the corresponding indicator lamp on
the instrument panel confirms the switching on
of the lighting selected.

Depending on version, the instrument panelmay have permanent back-lighting. Illumination
of the instrument panel is therefore not linked to
the exterior lighting.

Manual controls

The lighting is controlled directly by the driver by means of the ring A
and the stalk B
.
A. Main lighting mode selection ring: turn it
to position the s
ymbol required facing themark. S
ystem for selection and control of the various front and rear lamps providing the vehicle's lighting.

5
Visibility
87








Wiper controls


Programming

Various automatic wiper control modes are also
available according to the following options:


- automatic rain sensitive windscreen wipers,

- rear wipin
g on engaging reverse gear.

Model with intermittent wiping
Model with AUTO wiping

System for selection and control of the various
front and rear wiping modes for the elimination
of rain and cleaning.
The vehicle's front and rear wipers are
designed to improve the driver's visibility progressively according to the climaticconditions.


Manual controls


Windscreen wipers
A.Wiping speed selection stalk.
Single wipe (press down and release).
or
Fast
(heavy rain).
Normal
(moderate rain).
Intermittent
(proportional to the
speed of the vehicle).
Off.


Automatic, then single wipe(see the corresponding section).
The wiper commands are issued directl
y by the
driver by means of the stalk Aand the ring B.

Visibility
90
Version with Zenith windscreen
1.Rear side reading lamps
2.Rear courtesy lamp

Central or rear courtesy lamps
Version without Zenith windscreen
A.Central courtesy lamp


Front side reading lamps
)With the ignition on, the first press of thecorresponding switch switches on the reading lamp concerned in permanent
lighting mode. )Following a second press, it comes on:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the remote control locking button
is pressed, in order to locate your
v
ehicle. In this position, the courtes
y lamp
comes on gradually:


- when the vehicle is unlocked,

- when the ke
y is removed from the ignition,

- when a door is opened,

- when the remote control lockin
g button is
activated, in order to locate your vehicle.
It switches o
ff gradually:


- when the vehicle is locked,

- when the ignition is switched on,

-
30 seconds after the last door is closed.
Permanentl
y off.
Permanent lighting.
It switches o
ff gradually:


- when the vehicle is locked,

- when the i
gnition is switched on,

- 30 seconds after the last door is closed.
To switch o
ff the rear cour tesy lamp, place it in
the "permanently off" position.









Courtesy lamps Selection and control of the various passenger compartment lamps.

In permanent lighting mode, the lighting durationvaries, according to the circumstances:-with the ignition off, approximately ten minutes,-in energy economy mode, approximately thirty seconds,
-with the engine running, unlimited.

8
Safety
111














Trajectory control systems


Anti-slip regulation (ASR)
and electronic stability
programme (ESP)


The anti-slip regulation (also known as Traction Control) optimises traction to prevent skidding
of the wheels, by acting on the brakes of the
driving wheels and on the engine.
The electronic stability programme acts on the
brake of one or more wheels and on the engine to
keep the vehicle on the trajectory required by the
driver, within the limits of the laws of physics.


Activation

These systems are activated automatically each time the vehicle is started.
They come into operation in the event of a grip
or trajectory problem.
This is indicated b
y flashing of this
warning lamp in the instrument panel.

Deactivation
In exceptional conditions (starting a vehicle which is bogged down, stuck in snow, on softground...), if you are unable to make progress, it may be advisable to temporarily deactivate
these systems, so that the wheels can spin freely and allow the vehicle to move. ) Press the "ESP OFF"
button, located near
the steering wheel.
If this warning lamp comes on in the instrument panel and the indicator lamp in the button comes on, this
indicates that these systems are deactivated. It is recommended that the systems be reactivated as soon as possible.
Reactivation
These systems are reactivated automaticallyeach time the ignition is switched back on or from 30 mph (50 km/h).)
Press the "ESP OFF"
button again to reactivate them manually.


Operating fault
If this warning lamp comes on,accompanied by an audible signal
and a message in the screen, this
indicates a fault with these systems.
Have it checked by a CITROËN
dealer or a qualified workshop.
The trajectory control systems offer increased safety in normal driving, butthis should not encourage the driver totake extra risks or drive at high speed.
The correct functioning of these systems is assured provided that manufacturer's recommendations are observed on:


- wheels (tyres and rims),

- braking components,

- electronic components,

- assembly and repair procedures.
After an impact, have these systems checked by a CITROËN dealer or a qualified workshop.

Safety
116
Lateral airbags
Deployment
The lateral airbags are deployed unilaterally in
the event of a serious side impact applied to all
or par t o
f the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside
towards the inside of the vehicle.
The lateral airba
g inflates between the hip andshoulder of the front occupant of the vehicle and the corresponding door trim panel.

Impact detection zones
A.
Front impact zone.
B. Side impact zone.


Curtain airbags

System which protects the driver and
passengers (with the exception of the rear centre passenger) in the event of a serious side
impact in order to limit the risk of injury to the side of the head.
Each cur tain airbag is built into the pillars and
the upper passen
ger compar tment area.

Deployment

The cur tain airbag is deployed at the same
time as the corresponding lateral airbag in the event of a serious side impact applied to all or par t of the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside
towards the inside of the vehicle.
The cur tain airbag inflates between the front or
rear occupant of the vehicle and the windows.

Operating fault

If this warning lamp comes on in the instrument panel, accompanied by anaudible signal and a message in thescreen, contact a CITROËN dealer or a
qualified workshop to have the systemchecked. The airbags may no longer be
deployed in the event of a serious impact.
In the event of a minor impact or bump on the side of the vehicle or if the vehicle rolls over, the airbag may not be
deployed.
In the event of a rear or front collision, the airbag is not deployed.
System which protects the driver and frontpassenger in the event of a serious side impact
in order to limit the risk of in
jury to the chest,
between the hip and the shoulder.
Each lateral airba
g is fitted in the seat backrest frame, door side.