oil level Citroen C4 2005 2.G User Guide

Downloaded from www.Manualslib.com manuals search engine 68
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
26 Oil gauge screw 1 ± 0,2
27 Oil filter support screw 0,8 ± 0,1
28 Anti-emulsion plate fixing screw 1,9 ± 0,3
29 Oil level sensor fixing screw 1 ± 0,2
30 Drain plug 3,4 ± 0,3
31 Oil sump screw 0,8 ± 0,1
32 Oil pressure switch 2 ± 0,2
33 Oil strainer fixing nuts 0,8 ± 0,1
34 Oil strainer stud 0,6 ± 0,1
Coolant pump screw
35Pre-tightening0,7
Tightening1 ± 0,1
Engine: RFJ
B1BP35NP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 68

Downloaded from www.Manualslib.com manuals search engine 82
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
27 Oil gauge screw 1 ± 0,2
28 Oil level sensor fixing screw 1 ± 0,2
29 Drain plug 3,4 ± 0,3
30 Oil sump screw 0,8 ± 0,1
31 Oil pressure switch 2 ± 0,2
32 Oil strainer fixing nuts 1,1 ± 0,1
33 Oil strainer stud 0,6 ± 0,1
Oil pump screw
34Pre-tightening0,7
Tightening1 ± 0,1
35 Oil filter support screw 0,8 ± 0,2
36 Anti-emulsion plate fixing screw 1,9 ± 0,3
Engine: RFN
B1BP34NP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 82

Downloaded from www.Manualslib.com manuals search engine 92
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
26 Oil gauge screw 1 ± 0,2
27 Oil level sensor fixing screw 1 ± 0,2
28 Drain plug 3,4 ± 0,3
29 Oil sump screw 0,8 ± 0,1
30 Oil pressure switch 2 ± 0,2
31 Oil strainer stud 0,6 ± 0,1
Oil pump screw
32Pre-tightening0,7
Tightening1 ± 0,1
33 Oil strainer fixing nuts 1,1 ± 0,1
34 Oil filter support screw 0,8 ± 0,2
35 Anti-emulsion plate fixing screw 1,9 ± 0,3
Engine: RFK
B1BP35RP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 92

Downloaded from www.Manualslib.com manuals search engine 118
ENGINE
118
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
21
Turbocharger lubrication pipe3 ± 0,5
222,1 ± 0,323 Oil pressure switch 2 ± 0,224 Oil gauge 0,8 ± 0,225 Oil level sensor 2,7 ± 0,526 Piston skirt spray jets 2 ± 0,527 Oil filter cover 2,5 ± 0,528 Oil filter support 1 ± 0,229 Coolant/oil heat exchanger 1 ± 0,130 Drain plug 2,5 ± 0,331 Oil induction strainer 1 ± 0,132 Oil sump 1,2 ± 0,233 Oil pump assembly 0,9 ± 0,1
Engines: 9HY - 9HZ
B1DP1LMD
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 118

Downloaded from www.Manualslib.com manuals search engine ENGINE
279
C4CHECKING THE OIL PRESSURE
Petrol Diesel
Engine type KFU NFU RFJ RFN RFK 9HX 9HY 9HZ RHR
Temperature (°C) 90° 80°
Pressure (bars) 1,5 3 1,3 1,9
Rpm1000
Pressure (bars) 3 5,6 4
Rpm 2000 2000 2000
Pressure (bars) 5 6,3
Rpm 3000 3000
Pressure (bars) 43,5
Rpm 40004000
Tools (Toolkit 4103)
2279-T.Bis X X X X X X X X X
4103-T X X X X X X X X X
(-).0710.F1 X
(-).0710.B1 X
(-).1503.JXX X
4103-T.B X X
7001-T X X X X X
4202-T X X
NOTE: The oil pressure should be checked with the engine hot, after the oil level has been checked.
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 279

Downloaded from www.Manualslib.com manuals search engine 280
ENGINECHECKING THE OIL PRESSURE
To be read with the Petrol and Diesel correspondence tables
XSARA
Engine type KFW NFU RFN 8HZ 8HX WJY RHY RHZ
Temperature (°C) 90°C
Pressure (bars) 1,5 1,3 1,8 2
Rpm 1000 1000
Pressure (bars) 3
Rpm 2000
Pressure (bars) 4
Rpm 3000
Pressure (bars) 5,1 3,5 4,5 4
Rpm4000
Tools (Toolkit 4103-T)
2279-T.Bis X X X X X X X
4103-T X X X X X X X
4202-T X X X
1503-JX
3099-TX
7017-T.X23X
NOTE: The oil pressure should be checked with the engine hot, after the oil level has been checked.
XSARA
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 280

Downloaded from www.Manualslib.com manuals search engine 281
ENGINE
CHECKING THE OIL PRESSURE
To be read with the Petrol and Diesel correspondence tables
XSARA PICASSO
Engine type NFV 6FZ RFN 9HZ 9HY RHY
Temperature (°C) 90°C 80°C 90°C
Pressure (bars) 3,3 1,5 1,3 2
Rpm 1000
Pressure (bars) 3
Rpm 2000
Pressure (bars) 5
Rpm 3000
Pressure (bars) 4 6,3 3,5 4
Rpm 4000 4000
Tools (Toolkit 4103-T)
2279-T.Bis X X X X X X
4103-T X X X X X X
7001-T X
4202-T X X X
1503-J X X
NOTE: The oil pressure should be checked with the engine hot, after the oil level has been checked.
XSARA PICASSO
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 281

Downloaded from www.Manualslib.com manuals search engine 345
CLUTCH
GEARBOX
TRANSMISSION
RECOMMENDATIONS/PRECAUTIONS : AL4 AUTOMATIC GEARBOX
Procedure to be followed prior to carrying out repairs on AL4 autoactive gearbox
If a gearbox malfunction occurs, there are two possible configurations
depending on the seriousness of the fault:
- Gearbox in back-up mode with a replacement programme of
(the fault
values are taken in substitution).
- Gearbox in back-up mode with an emergency programme (3rd hydraulic).
WARNING: In the emergency programme, an impact is felt when
changing P/R, N/R and N/D.
Réception client.
Discuss with the customer, to find out all the malfunction symptoms.
Oil quality - Oil level.
Oil quality.
If the gearbox has suffered a serious fault resulting in a malfunction or
the destruction of a clutch, the oil will overheat and become
contaminated with impurities: the oil is said to be «burnt».
This is characterised by a black colour and the presence of an
unpleasant smell.
ESSENTIAL: The gearbox must be replaced.Oil level
(see corresponding operation).
An excessive oil level can result in the following consequences:
- Excessive heating of the oil.
- Oil leaks.
An insufficent level causes the destruction of the gearbox.
Top up the level of oil in the gearbox
(if necessary).
Check using a diagnostic tool.
Read the fault codes
(engine and gearbox).
Absence of fault codes.
Carry out parameter measures, actuator tests and a road test.
Presence of fault codes.
Carry out the necessary repairs.
Delete the fault codes.
Carry out a road test to check the repair and, if need be, modify the
gearbox ECU parameters
(this is essential after an initialisation of the
ECU).
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 345

Downloaded from www.Manualslib.com manuals search engine 347
CLUTCH
GEARBOX
TRANSMISSION
TIGHTENING TORQUES: AL4 AUTOMATIC GEARBOX
Engines: NFU - RFJ
B2CP3EDD
B2CP3X7D
Tightening torques (m.daN).
(1) Fixing of the electrovalve for modulation of the flow
of oil into the exchanger (EPDE): 1 ± 0,2
(2)Heat exchanger fixing: 5 ± 1
(3) Output speed sensor fixing
(4)Output speed sensor fixing: 1 ± 0,2
(5)Oil overflow and drain fixing(X = 48 mm)
: 0,9 ± 0,2
(6)Oil level plug: 3,3 ± 0,5
(7)Oil pressure sensor fixing: 0,8 ± 0,1
C4 - XSARA - XSARA PICASSO
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 347

Downloaded from www.Manualslib.com manuals search engine 429
AIR
CONDITIONING
ESSENTIAL: The compressor lubricant is extremely hygroscopic; always use FRESH oil.
Checking the compressor oil level
There are three specific cases:
- 1/Repairs to a system without leaks.
- 2/Slow leak.
- 3/Fast leak.
1/ Repairing a system without leaks.
a) - Using draining/recovery equipment not fitted with an oil decanter.
- Drain the system as slowly as possible via the LOW PRESSUREvalve, so as not to lose any oil.
- No more oil should be added when filling the system with R 134.afluid.
b) - Using draining/filling equipment fitted with an oil decanter.
- Drain the R 134.afluid from the system in accordance with the instructions in the equipment handbook.
- Measure the amount of oil recovered.
- Add the same amount of NEWoil when filling the system with R 134.afluid.
c) - Replacing a compressor.
- Remove the old compressor, drain it and measure the oil quantity.
- Drain the new compressor
(supplied full), so that the same amount of NEWoil is left in the compressor as was in the old compressor.
- No more oil should be added when filling the system with R 134.a fluid.
SPECIAL FEATURES: AIR CONDITIONING SYSTEM (R 134.a)
Compressor lubricant
Angl.-t2-page428-456-2005 9/01/06 10:25 Page 429