Light Citroen C4 2008 1.G Service Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4, Model: Citroen C4 2008 1.GPages: 257, PDF Size: 8.06 MB
Page 135 of 257
123
X
M A I N T E N A N C E
HDi 135 and 140 engines
D e t a c h t h e p r o t e c t i o n c o v e r t o access the priming pump.
HDi engines are of a highly technical nature.
All maintenance and repairs r e q u i r e s p e c i fi c q u a l i fi c a t i o n s which only your CITROËN r e q u i r e s p e c i fi c q u a l i fi c a t i o n s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s
Dealer can guarantee.
HDi 90 and 110 engines
D e t a c h t h e p r o t e c t i o n c o v e r t o access the priming pump.
In the event of running out of fuel:
- A f t e r fi l l i n g ( 5 l i t r e s m i n i m u m ) , o p -erate the manual priming pump until some resistance is felt.
- Operate the starter motor while depressing the accelerator pedal slightly until the engine starts.
I f t h e e n g i n e f a i l s t o s t a r t a t t h e fi r s t attempt, wait 15 seconds before try-ing again.
If the engine fails to start after sev-eral attempts, repeat the procedure from the beginning.
When the engine is idling, acceler-ate slightly to complete the bleeding of the circuit.
PRIMING THE DIESEL FUEL SYSTEM
Page 137 of 257
1 2 5
XI
P R A C T I C A L A D V I C E
Access to the spare wheel
L i f t t h e b o o t fl o o r .
CHANGING A WHEELDimension of the spare wheel
I f y o u r s p a r e w h e e l i s o f a d i f f e r e n t d i m e n s i o n t o t h o s e o n t h e v e h i c l e ( i d e n t i fi e d b y a l a b e l ) , i t i s e s s e n t i a l t o u s e i t o n l y o n a t e m p o r a r y b a s i s , t o d r i v e n o t a b o v e 8 0 k m / h ( 5 0 m p h ) a n d t o h a v e t h e o r i g i n a l w h e e l r e fi t - t e d a s s o o n a s p o s s i b l e .
Tyre pressures
T h i s i s i n d i c a t e d o n a l a b e l i n t h e f r o n t d o o r a p e r t u r e .
Switch on your hazard warning lamps.
Never get underneath the vehicle if it is supported only by the jack; use an axle stand.
The jack is designed s p e c i fi c a l l y f o r y o u r v e h i c l e , do not use it for other applications.
R e fi t t h e r e p a i r e d o r i g i n a l wheel as soon as possible.
W i t h a s p a r e w h e e l fi t t e d , d r i v e with caution.
Light alloy wheels
I f y o u r v e h i c l e i s e q u i p p e d w i t h l i g h t a l l o y w h e e l s a n d a s t e e l s p a r e w h e e l , t h e n i f fi t t i n g t h e l a t t e r i t i s n o r m a l t o n o t e t h a t t h e h e a d s o f t h e w h e e l b o l t s d o n o t c o m e t o b e a r o n t h e w h e e l r i m .
T h e s t e e l s p a r e w h e e l i s s e c u r e d b y t h e c o n i c a l t a p e r i n g o f t h e w h e e l b o l t s ’ s h a f t s , s e e d i a g r a m .
W h e n r e fi t t i n g t h e l i g h t a l l o y w h e e l , e n s u r e t h a t t h e w h e e l b o l t h e a d s a r e i n u n d a m a g e d c o n d i t i o n .
Page 144 of 257
1 3 2
XI
P R A C T I C A L A D V I C E
Interior lamp
U n c l i p t h e t r a n s p a r e n t c o v e r o f t h e i n t e r i o r l a m p t o r e a c h t h e b u l b .
Bulb: W 5 W
Boot lighting
U n c l i p t h e l e n s u n i t t o a c c e s s t h e b u l b .
Bulb: W 5 W
Glovebox lighting
U n c l i p t h e l e n s u n i t t o a c c e s s t h e b u l b .
Bulb: W 5 W
Spotlamps
U n c l i p t h e c o v e r o f t h e i n t e r i o r l a m p , t h e n i f n e c e s s a r y t h e p a r t i t i o n f o r t h e s p o t l a m p c o n c e r n e d , t o a c c e s s t h e b u l b .
Bulb: W 5 W
Sill lighting
U n c l i p t h e h e a d l a m p t o a c c e s s t h e b u l b .
Bulb: W 5 W
Page 147 of 257
1 3 5
XI
P R A C T I C A L A D V I C E
Rear number plate lamp
- I n s e r t a t h i n s c r e w d r i v e r i n t o o n e o f t h e h o l e s o n t h e o u t s i d e o f t h e p l a s t i c c o v e r .
- P u s h o u t w a r d s .
- R e m o v e t h e p l a s t i c c o v e r .
- R e p l a c e t h e f a u l t y b u l b b y s i m p l y p u l l i n g i t o u t .
Bulb: W 5 W .
Foglamp
R o t a t e t h e b u l b - h o l d e r a q u a r t e r t u r n .
Bulb: P21
Reversing lamp (5-door model)
R o t a t e t h e b u l b - h o l d e r a q u a r t e r t u r n .
Bulb: P21
After replacing a bulb, check the correct operation of the lighting and signalling.
Page 181 of 257
169
XIII
A U D I O
RDS SYTEM
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system.The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data provides access to various functions described in this chapter, such as: display of t h e s t a t i o n n a m e , i n t e r m i t t e n t t r a f fi c i n f o r m a t i o n fl a s h e s o r a u t o m a t i c scanning of stations. This enables you to continue listening to your chosen radio station, regardless of the different frequencies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best possible reception by continuously looking for any other frequencies on which the selected radio station is broadcast, automatically choosing the frequency offering the best reception (if the station broadcasts on more than one transmitter or frequency).
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus:- Main menu (press button O).
- AUDIO menu (press button L).
To activate/deactivate the RDS functions on the display C:
1. Press button O.
2. Select the AUDIO icon using buttons J or M.
3. C o n fi r m y o u r c h o i c e w i t h a press on button L.
4. Select the sub-menu for the FM waveband, via buttons J or M. C o n fi r m y o u r c h o i c e w i t h a press on button L.
5. Select scanning for RDS stations, via buttons J or M.
6. Validate your choice with a press on button L.
7. Using control L, select/deselect to activate/deactivate the function.
8. Validate your choice by selecting "OK" on the display.
To activate/deactivate the RDS functions on the display A:
1. Press button O.
2. Select the AUDIO-CD icon via buttons J or M.
3. Select scanning for RDS stations, via buttons J or M. The system tells you the status (active or inactive) of the function.
4. Modify this status via buttons Kor N.
5. Then please wait for the display to disappear.
Note:
If the RDS function is active:- The "RDS" on the display will light up provided the station being received uses the RDS system with scanning of frequencies.
- The "RDS" on the display is barred if the station received uses the RDS system without frequency search.
If your RDS function is deactivated, the "RDS" on the display will be absent in all cases.The display will indicate the "NAME" for the stations that use the RDS system and the frequency for stations that do not use it.
Page 183 of 257
171
XIII
A U D I O
CD SOURCE
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.To change manually to CD source (CD already inserted), press button D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the audio system will automatically switch to radio source.If the CD is not removed within 10 to 15 seconds of being ejected, it will automatically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next track.Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previous track.Press the buttons successively to skip several tracks at a time.This can also be done via the control G. As the list of tracks is displayed on the screen, select the desired track using buttons J or M, then validate using button L.You can also do this by means of control 2 at the steering wheel.
Fast forward and rewind with accelerated sound
To move swiftly through the CD, press and keep pressed button Kor N, respectively for fast forward or rewind with accelerated sound.Play resumes as normal when the button is released.
Menu
This menu allows activation/deactivation of two options: - P l a y b a c k o f t h e fi r s t 7 s e c o n d s (approx.) of each track of the CD.
- Random playback of the CD tracks.
This can be accessed in two ways:
- Either by pressing button O and proceeding as for Search of Stations RDS – for screen C, the sub-menu corresponds to the Audio Preferences.
- Or, provided you are in CD source, by pressing on button L. You can then access the Audio menu (for screen C only).
Note:
If one of these options is active, it remains active for CD changer source.
Safety precautions
For safety, do not use a CD player if the cabin temperature is higher than +60 °C or lower than -10° C.If the temperature becomes too high, an automatic safety device will prevent the CD player from working until an acceptable temperature is restored.
Handling compact discs
Do not drop them. Store the CDs so that they are kept of dust. Avoid touching the disc surface as any scratches may adversely affect the sound quality. Do not attach any stickers to the discs. Do not use damaged or deformed discs. Do not expose them to heat or direct sunlight.If the surface of the compact disc is dirty, it can be wiped with a soft, clean cloth. Always wipe from the centre of the disc outwards.