display Citroen C4 2008 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4, Model: Citroen C4 2008 1.GPages: 257, PDF Size: 8.06 MB
Page 7 of 257
10
F A M I L I A R I S A T I O N
FIXED CENTRED CONTROLS STEERING WHEEL
Controls for speed limiter and cruise control Audio system controls
Function controls:
Multifunction display controls- Display lighting rheostat
- Voice recognition
- Air recirculation
- Telephone
- Personal button
Page 9 of 257
12
F A M I L I A R I S A T I O N
Display lighting rheostat
Starting voice recognition
(See "Audio" or your Navidrive instructions)Access to "Main menu"*Scrolling in the multifunction display
Telephone pick-elephone pick-elephone pick-up/hang-up
(See "Audio" or your Navidrive instructions)
Personal button:
- Black panel (default function), or
- Interior lamp on/off, or
- Log of alerts, or
- Status of functions
Give a long press on this button to display the personalisation menu.
Selection of the type of in-formation displayed on the right of the screen (radio, trip computer, navigation/guidance…) and for screen A, choice of activation/deac-tivation of your functions and choice of your adjustments
Cancel the current operation or return to the previous screen
Air recirculation
Validation of the function selected or the v a l u e m o d i fi e d
Pick up/hang up
(See "Audio" or your Navigation instructions)
* In compliance with national legislation, in some coun-tries the "menu" control is deactivated when driving.
Display the "Directory" menu
(See "Audio" or your Navidrive instructions)
FIXED CENTRED CONTROLS STEERING WHEEL
Page 20 of 257
23
I
D A S H B O A R D
Display lighting rheostat
On opening the driver’s door or unlocking with the remote control, for approximately 30 seconds the instrument panel is activated, dis-playing the mileage recorders and if applicable, the maintenance indica-tor spanner.
Central display
Display of warning lampsTrip mileage recorder reset button
Display of alerts and Status of functions
Display of warning lamps
INSTRUMENT PANEL
5 Trip mileage recorder
6 Fuel gauge
7 Engine oil level check
8 Coolant temperature
1 Rev counter
2 Cruise control or speed limiter settings
3 Speedometer
4 Maintenance indicator on switching on, then mileage recorder
Page 23 of 257
26
I
D A S H B O A R D
ESP/ASR warning lamp In operation
When either the ESP or ASR system is brought into operation, the ESP/ASR warning l a m p fl a s h e s .
In the event of a problem
When the vehicle is moving, the li-ghting of the ESP/ASR warning lamp indicates that the system is malfunctioning.
Contact a CITROËN dealer.
Deactivation
Illumination of the ESP/ASR warning lamp and of the ESP control, means that the system is deactivated.
Fuel gauge and low fuel warning
When the tank is full, all the indicator bars are illuminated.
When the low fuel level war-ning comes on, there remain around 7 litres of fuel in the tank and 2 or 3 b a r s o f t h e g a u g e w i l l fl a s h .
If the last bar disappears, there are only around 2 litres of fuel in the tank.
"Foot-on-brake" starting warning lamp for (6 speed) Electronic Gearbox System
During the engine starting phase, t h i s fl a s h e s i f y o u a r e n o t p r e s s i n g the brake pedal.
See "(6 speed) Electronic Gearbox System".
T h i s w a r n i n g l a m p m a y fl a s h i n t h e instrument panel to remind you to apply the brake when engaging re-verse gear.
Complementary to the catalytic c o n v e r t e r , t h i s fi l t e r m a k e s a n a c -tive contribution to the preservation of air quality by the retaining of the unburnt pollutant particles. Black exhaust fumes are thus no longer emitted.
C l o g g i n g o f t h e p a r t i c l e fi l t e r
The SERVICE warning lamp and a message in the instrument panel are displayed indicating that t h e p a r t i c u l a t e fi l t e r i s s t a r t i n g t o become clogged (exceptionally pro-longed urban driving conditions: re- d u c e d s p e e d , t r a f fi c c o n g e s t i o n … ) .
DIESEL PARTICULATE
FILTER SYSTEM
T o r e g e n e r a t e t h e fi l t e r , y o u a r e advised to drive, as soon as traf- fi c c o n d i t i o n s p e r m i t , a t a s p e e d o f 60 km/h (40 mph) or more for at least 5 minutes (until the warning message disappears).
If this alert persists, consult a CITROËN dealer.If this alert persists, this alert
Observation: After prolonged idling or driving at very low speeds, you may occasionally notice water va-pour being emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment.
Diesel fuel additive level
If the additive level is low, a message appears in the multifunction screen, accompanied by an audible signal and illumination of the SERVICE warning lamp: it is necessary to have the additive le-vel topped up. Contact a CITROËN necessary to have the additive le-additive le-
dealer as soon as possible.
Page 24 of 257
26
I
D A S H B O A R D
ESP/ASR warning lamp In operation
When either the ESP or ASR system is brought into operation, the ESP/ASR warning l a m p fl a s h e s .
In the event of a problem
When the vehicle is moving, the li-ghting of the ESP/ASR warning lamp indicates that the system is malfunctioning.
Contact a CITROËN dealer.
Deactivation
Illumination of the ESP/ASR warning lamp and of the ESP control, means that the system is deactivated.
Fuel gauge and low fuel warning
When the tank is full, all the indicator bars are illuminated.
When the low fuel level war-ning comes on, there remain around 7 litres of fuel in the tank and 2 or 3 b a r s o f t h e g a u g e w i l l fl a s h .
If the last bar disappears, there are only around 2 litres of fuel in the tank.
"Foot-on-brake" starting warning lamp for (6 speed) Electronic Gearbox System
During the engine starting phase, t h i s fl a s h e s i f y o u a r e n o t p r e s s i n g the brake pedal.
See "(6 speed) Electronic Gearbox System".
T h i s w a r n i n g l a m p m a y fl a s h i n t h e instrument panel to remind you to apply the brake when engaging re-verse gear.
Complementary to the catalytic c o n v e r t e r , t h i s fi l t e r m a k e s a n a c -tive contribution to the preservation of air quality by the retaining of the unburnt pollutant particles. Black exhaust fumes are thus no longer emitted.
C l o g g i n g o f t h e p a r t i c l e fi l t e r
The SERVICE warning lamp and a message in the instrument panel are displayed indicating that t h e p a r t i c u l a t e fi l t e r i s s t a r t i n g t o become clogged (exceptionally pro-longed urban driving conditions: re- d u c e d s p e e d , t r a f fi c c o n g e s t i o n … ) .
DIESEL PARTICULATE
FILTER SYSTEM
T o r e g e n e r a t e t h e fi l t e r , y o u a r e advised to drive, as soon as traf- fi c c o n d i t i o n s p e r m i t , a t a s p e e d o f 60 km/h (40 mph) or more for at least 5 minutes (until the warning message disappears).
If this alert persists, consult a CITROËN dealer.If this alert persists, this alert
Observation: After prolonged idling or driving at very low speeds, you may occasionally notice water va-pour being emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment.
Diesel fuel additive level
If the additive level is low, a message appears in the multifunction screen, accompanied by an audible signal and illumination of the SERVICE warning lamp: it is necessary to have the additive le-vel topped up. Contact a CITROËN necessary to have the additive le-additive le-
dealer as soon as possible.
Page 25 of 257
27
I
D A S H B O A R D
The maintenance indicator informs you when the next service is due, in conformity with the servicing pro-gramme detailed in the vehicle’s Maintenance Guide. This informa-tion is determined depending on two parameters: the mileage travel-led and the time elapsed since the previous service.
Operation
When the ignition is switched on and for several seconds afterwards, the maintenance spanner symbol appears; the total mileage recorder shows how many miles remain to be travelled before the next service is due (in thousands and hundreds of miles).
Functioning if the distance to the next service is less than 600 miles
Each time the ignition is switched o n , a n d f o r fi v e s e c o n d s , t h e m a i n -tenance symbol and the mileage will fl a s h .
For example: you have the following distance left to travel before the next service: 900 km.
F o r fi v e s e c o n d s o n s w i t c h i n g o n t h e ignition, the display shows
A few seconds afterwards, the total mileage display appears.
A few seconds afterwards, the total mi-leage display appears and the mainte-nance symbol remains illuminated.
T h i s s i g n i fi e s t h a t t h e v e h i c l e w i l l b e due for a service shortly.
MAINTENANCE INDICATOR
For example: you have the following dis-tance left to travel before the next service:
Page 28 of 257
29
I
D A S H B O A R D
When the ignition is switched on, the oil level indicator is displayed for se-veral seconds.This display indicates normal ope-rating.
A fl a s h i n g o f "OIL" indicates an oil level that is below the minimum.
Check using the manual dipstick.
Check the oil level with the vehicle on horizontal ground, the engine ha-ving been switched off for at least 15 minutes.
A fl a s h i n g o f "OIL --" indicates a malfunction of the indicator.
Consult your CITROËN dealer.
ENGINE OIL LEVEL
INDICATOR
The rheostat is active if the sidelamps are on and applies to:
- the instrument panel
- the displays
The desired brightness is selected via control A or by pressing control AB.
With control B, press until the bri-ghtness is at maximum. Release, press until you reach minimum.
DASHBOARD LIGHTING RHEOSTAT
Page 29 of 257
30
I
D A S H B O A R D
A f t e r t h e fi r s t p r e s s o n c o n t r o l C, only the top part of the display re-mains illuminated.
A second press on control C triggers black panel mode.
This function switches off certain of the displays, for night driving. It can be activated:
- either by 2 presses on control C
- or by 1 press on control D if this control has been programmed with the black panel function.
DARK BUTTONBLACK PANEL (with headlamps on)
The instrument panel continues to show vehicle speed as well as the cruise control and speed limiter functions if these are activated.
I f t h e r e i s a n a l e r t o r a m o d i fi c a t i o n of functions or adjustments, black panel is interrupted.
To programme control D:
- give a long press on control D,
- then select the black panel function on the multifunction screen using the arrowed buttons on your radio/CD or Navidrive system. Validate with a press on "OK".
Note: the dashboard lighting rheostat still operates in black panel mode.
Page 30 of 257
31
II
M U L T I F U N C T I O N D I S P L A Y
Controls:
A - Access to the "Main menu"
B - Scrolling in the display menus.
C - Validation and selection in the menus of the function chosen o r t h e v a l u e m o d i fi e d
D - Cancellation of the operation or return to the previous display.
E - Selection of the type of information displayed in zone 2 (date, radio/CD and trip computer)
E or F- In the menus, choice of activation/deactivation of your functions and choice of your settings.
Presentation:
1 - Time
2 - Date and Display zone
3 - Ambient temperature
If the outside temperature is between +3 °C and -3 °C, the temperature d i s p l a y fl a s h e s ( r i s k o f i c e ) .
Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is standing in bright sunshine.
DISPLAY A
The driver is advised not to operate the controls when driving.
Page 32 of 257
33
II
M U L T I F U N C T I O N D I S P L A Y
To display the log of alerts
- Press on A.
- Using B, select the sub-menu for o p t i o n s . C o n fi r m w i t h t w o p r e s s e s on C.
Note: You can cancel the start of the display by selecting E to abandon, validate with a press on C.
The alerts that have previously been signalled to you but not resolved, are recalled to you in a scroll. To delete the display of an alert, press D.
To adjust the date and time
- Press on A.
- Using B, select the sub-menu for Display Adjustments then validate with a press on C.
- Using B, select what you wish to modify: year, month, day, hour, minutes, or display mode.
- M a k e y o u r a d j u s t m e n t b y p r e s s e s on E or F or. You can continue your adjustments, selecting further parameters by pressingB . W h e n y o u h a v e fi n i s h e d y o u r adjustments, press C.
To choose the language
- Press on A.
- Using B, select the sub-menu for L a n g u a g e s . C o n fi r m y o u r c h o i c e with a press on C.
- By presses on E or F or, select the language of your choice then validate with a press on C.
To choose the units
- Press on A.
- Using B, select the sub-menu for U n i t s . C o n fi r m y o u r c h o i c e w i t h a press on C.
- Using B, select the unit you wish to modify (Temperature or Consumption).
- Via presses on E or F or, select the unit of your choice, then validate with a press on C.
Note: This choice concerns all the types of information (fuel consumption, speed, etc.) that appear on the displays.