Citroen C4 2014.5 2.G Owner's Manual

239
F Remove  the   air   deflector   by   unclipping  e
ach   of   its   three   attachment   points.
F
 
U
nclip   the   bonnet   release   cable   at   its  
two
  fixings.
F
 
M
ove   the   cable   down.
After
  changing   the   failed   bulb,   remember   to  
p

ut   everything   back   in   place   (cable   and   air  
d

eflector).
Depending
  on   the   engine   and   only   on   the   left  
h

and   side,   you   must   first   carry   out   the   following  
o

perations for access to the protective covers
on   the   bulbs.
Access to bulbs
Model with halogen headlamps
and LED light signature* (type 2)
1. Direction indicators (LEDs).
2. Daytime running lamps / sidelamps (LEDs).3. Dipped beam headlamps (H7).
4. M
ain beam headlamps (H7).
5.
F

o g l a m p s ( H11) .
Bulbs
  with   lugs,   type   H1,   H7...   take   care  
t

o   position   them   correctly   to   ensure   the  
b

est
 l
ighting.
Model with halogen headlamps
(t y p e 1)
1. Direction indicators (H21 clear).
2. Dipped beam headlamps (H7).
3.
M

ain beam headlamps (H1).
4.
D

aytime running lamps / sidelamps
(P21/5W XL).
5.
F

o g l a m p s ( H11) .Bulbs
  with   lugs,   type   H1,   H7...   take   care  
t

o   position   them   correctly   to   ensure   the  
b

est
 l
ighting.
*
  LED:   light   emitting   diodes.
11
Practical information

240
Changing direction indicator
bulbs
Model with halogen headlamps (type 1)
F T urn   the   bulb   holder   a   quarter   of   a   turn   and  
p

ull   it   out.
F
 
P
ull   the   bulb   out   and   change   it.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder. Model with Xenon headlamps
F
 
R
emove   the   protective   cover   by   pulling   its  
t

ongue.
F  
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
p

ull   it   out.
F  T urn   the   bulb   a   quarter   of   a   turn   and  c
hange it .
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Amber
  coloured   bulbs,   such   as   the  
d

irection   indicators,   must   be   replaced  
w

ith   bulbs   of   identical   specifications  
a

nd   colour.
Rapid
  flashing   of   the   direction   indicator  
w

arning   lamp   (right   or   left)   indicates   the  
f

ailure   of   a   bulb   on   that   side.
Model with halogen headlamps (type 2)
For   the   replacement   of   this   type   of   LED   lamp,  
c

ontact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Practical information

241
Changing main beam headlamp
bulbs (on models with
type

1

halogen headlamps)
F Remove   the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   connector.
F
 
S
queeze   the   springs   to   release   the   bulb.
F
 
P
ull   the   bulb   out   and   change   it.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Changing main beam headlamp
bulbs (on models with
type

2

halogen headlamps)
F Remove   the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   connector.
F
 
P
ull   the   bulb   out   and   change   it.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Changing dipped beam headlamp
bulbs (on models with halogen
headlamps)
F Remove   the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   connector.
F
 
S
pread   the   springs   to   release   the   bulb.
F
 
P
ull   the   bulb   out   and   change   it.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
When
  refitting,   close   the   protective  
c

over   carefully   to   preserve   the   sealing  
o

f   the   headlamp.
11
Practical information

242
Changing daytime running lamp /
s idelamp bulbs (on models
with xenon or type 1 halogen
headlamps)
F Remove   the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   bulb   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
p

ull it out
F
 
P
ull   the   bulb   out   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
Changing daytime running
lamps / sidelamps (on models
with type
2 halogen headlamps)
For the replacement of this type of LED lamp, contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Practical information

243
Changing foglamp bulbs
F Introduce  a   flat   screwdriver   in   the   hole   in  t
he f inisher.
F
 
P
ull   and   lever   to   unclip   the   bumper   finisher  
(

the   parking   sensor   stays   with   the   finisher).
F
 
R
emove   the   two   module   fixing   screws   and
 r

emove   it   from   its   housing.
F
 
D
isconnect   the   bulb   holder   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
e

xtract   it.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
To
  replace   these   bulbs   you   may   also   contact   a
 C

ITROËN   dealer   or   a   qualified   workshop.
Changing the side spotlamps
(LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Changing integrated direction
indicator side repeaters
F Insert  a   flat   screwdriver   towards   the   centre  o
f   the   repeater   between   the   repeater   and  
t

he   base   of   the   mirror.
F
 
T
ilt   the   flat   screwdriver   to   extract   the  
r

epeater   and   remove   it.
F
 
D
isconnect   the   repeater   connector.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   obtain   replacement   repeaters.
11
Practical information

244
Model with 3D lamps (type 2)
1. Brake lamp (P21W).
2. Sidelamp (R10W ).
3.
D

irection indicator (PY21W amber) .
4.
R

ear foglamp, right hand side (P21W).
5.
R

eversing lamp, left hand side (P21W).
Access to rear lamps
Amber bulbs, such as those for the direction   indicators,   must   be   replaced  
b

y   bulbs   of   the   same   rating   and   colour.
The
  lamps   on   the   tailgate   are   dummy  
u

nits.   They   are   there   for   aesthetic  
p

urposes   only.
Rear lamps
Model with conventional lamps
(t y p e 1)
1. Brake lamp / sidelamp (P21/5W).
2. Direction indicator (PY21W amber) .
3.
R

eversing lamp (P21W).
4.
R

ear foglamp (P21W). You
  will   need   a   flat   screwdriver   and   a   10   mm  
b

ox
 span
ner.
The
  four   bulbs   are   changed   from   inside   the  
b

oot:
F

o
pen the boot,
F
 
r
emove   the   access   flap   from   the  
c

orresponding   side   trim   panel,
F
 
u
nclip   the   lamp   unit   connector,
F
 
a
s   a   precaution,   place   a   cloth   in   the   bottom  
o

f   the   housing   to   catch   the   nut   if   it   is  
d

ropped   on   removal,
F
 
s
lacken   the   hexagonal   nut   using   a   10   mm  
b

ox   spanner   then   remove   the   nut   by   hand,
F
 
c
arefully   remove   the   lamp   unit   by   pulling  
o

ut   it   straight   out   towards   the   rear.
Practical information

245
After removing the lamp unit, carry out the following   operations   to   replace   the   failed   bulb:
F
 
r
emove   the   two   bulb   holder   fixing   screws,
F
 
s
pread   the   four   tabs   and   remove   the   bulb  
h

o l d e r,
F
 
t
urn   the   bulb   a   quarter   of   a   turn   and   change   it.
Changing rear lamp bulbs
(t y p e 1)
After removing the lamp unit, carry out the following   operations   to   replace   the   failed   bulb:
F
 
r
emove   the   three   bulb   holder   fixing   screws,
F
 
s
pread   the   three   tabs   and   remove   the   bulb  
h

o l d e r,
F
 
t
urn   the   bulb   a   quarter   of   a   turn   and   change   it.To refit, carry out these operations in reverse
o r d e r.
Changing rear lamp bulbs
(type
2)
Take care to engage the lamp unit in its g
uides,   while   keeping   it   in   line   with   the  
v

ehicle.
Tighten
  sufficiently   to   ensure   sealing,  
b

ut   without   forcing,   so   as   to   avoid  
d

amaging
 t
he
 lam
p.
11
Practical information

246
To facilitate the removal of the lamp, carry out this   operation   with   the   tailgate   half   open.
F
 
I
nsert   a   thin   screwdriver   into   the   lens  
c

utout.
F
 
P
ush   it   outwards.
F
 
R
emove   the   lens.
F
 
C
hange   the   faulty   bulb.
To
  refit,   press   on   the   lens   to   clip   it   in   place.
Third brake lamp (LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Number plate lamps (W5W)
Practical information

247
Changing a fuse
The extraction tweezer is fitted to the back of the   dashboard   fusebox   cover.
To
  gain   access   to   them:
F
 
o
pen   the   glove   box   lid,
F
 
u
nclip   the   carrier   fitted   to   the   fusebox  
c

over   by   pulling   on   the   right,
F
 
r
emove   the   tweezer,
Access to the tools
F open  the   fusebox   cover   by   pulling   at   top  r
ight,   then   left,
F
 
f
old   down   the   fusebox   cover   completely.
11
Practical information

248
Changing a fuse
GoodFailed
To
 
replace
 
a
 
fuse,
 
you
 
must:
F
 
u

se
 
the
 
special
 
tweezer
 
to
 
extract
 
the
 
fuse
 f
rom
 
its
 
housing
 
and
 
check
 
the
 
condition
 
of
 it
s f
ilament.
F
 
a

lways
 
replace
 
the
 
failed
 
fuse
 
with
 
a
 
fuse
 
o

f
 
the
 
same
 
rating
 
(same
 
colour);
 
use
 
of
 
a

 
different
 
rating
 
may
 
cause
 
malfunctions
 
(

risk
 
of
 
fire).
If
 
the
 
fuse
 
fails
 
again
 
soon
 
after
 
replacement,
 
h

ave
 
the
 
electrical
 
system
 
checked
 
by
 
a
 
C

ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop. Tw e e z e r
The
  replacement   of   a   fuse   not  
m

entioned   in   the   following   tables   may  
c

ause   a   serious   malfunction   of   your  
v

ehicle.   Contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
CITR
oËn
will not accept responsibility
for   the   cost   incurred   in   repairing   your  v
ehicle   or   for   rectifying   malfunctions  r
esulting   from   the   installation   of  
a

ccessories   not   supplied   and   not  
r

ecommended   by   CITROËN   and  
n

ot   installed   in   accordance   with   its  
in

structions, in particular when the
combined
  consumption   of   all   of   the  
a

dditional   equipment   connected  
e

xceeds
 1
0
 mil
liamperes.
Installing electrical
accessories
Your vehicle's electrical system is designed   to   operate   with   standard   or  
o

ptional
 e
quipment.
Before
  installing   other   electrical  
e

quipment   or   accessories   on   your  
v

ehicle,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Before
 
changing
 
a
 
fuse,
F
 
t

he
 
cause
 
of
 
the
 
failure
 
must
 
be
 
identified
 a
nd r
ectified,
F
 a
ll
 
electrical
 
consumers
 
must
 
be
 
switched
 
o

f f,
F
 
t

he
 
vehicle
 
must
 
be
 
immobilised
 
with
 
the
 
ig

nition
 o

ff,
F
 
I

dentify
 
the
 
failed
 
fuse
 
using
 
the
 
allocation
 
t

ables
 
and
 
illustrations
 
on
 
the
 
following
 
pag

es.
Practical information