stop start Citroen C4 2014.5 2.G Owner's Guide

215
Checks
Particle filter (Diesel)
- fixed  illumination   of   the   particle  f
ilter   warning   lamp,   accompanied  
b

y   an   audible   signal   and   a  
m

essage   that   there   is   a   risk   of  
b

lockage   of   the   particle   filter.
The presence of this label, in particular with
the
 
Stop
 
&
 
Start
 
system,
 
indicates
 
the
 
use
 
of
 
a

 
specific
 
12
 
V
 
lead-acid
 
battery
 
with
 
special
 
t

echnology
 
and
 
specification.
 
The
 
involvement
 
o

f
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop
 
i

s
 
essential
 
when
 
replacing
 
or
 
disconnecting
 
t

he
 
battery. As
 
soon
 
as   the   traffic   conditions   permit,  
r

egenerate   the   filter   by   driving   at   a   speed   of   at  
l

east
 
40
 
mph   (60   km/h)   until   the   warning   lamp  
g

oes
 
off.
If
 
the
 
warning   lamp   stays   on,   refer   to   the  
"

Additive
 
level"   section.
Unless
 
other wise
 
indicated,
 
check
 
these
 
components
 
in
 
accordance
 
with
 
the
 
manufacturer's
 
service
 
schedule
 
and   according   to   your   engine.
Other wise,
 
have
 
them
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Air filter and passenger compartment filter
Refer to the manufacturer's s
ervice   schedule   for   details   of   the  
r

eplacement   intervals   for   these  
c

omponents.
Oil filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice   schedule   for   details   of  
t

he   replacement   interval   for   this  
c

omponent.
12 V battery
The battery does not require any maintenance.
H owever,   check   that   the   terminals   are   clean a

nd   correctly   tightened,   particularly   in   summer
 a

nd   winter.
When carrying out work on the battery, refer to   the   "12 V   battery"   section   for   details   of   the  
p

recautions   to   be   taken   before   disconnecting  
t

he   battery   and   following   its   reconnection.Depending
  on   the   environment   (e.g.   dusty  a
tmosphere)   and   the   use   of   the   vehicle  
(e.g.
  city   driving),   replace them twice as often
if necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.The start of saturation of the particle filter is
indicated
  by:
on a n

ew vehicle, the first operations of
regeneration
  of   the   particle   filter   may   be  
a

ccompanied   by   the   smell   of   "burning",  
w

hich   is   per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle   at   very   low   speed   or   at   idle,  
y

ou   may,   in   exceptional   circumstances,  
n

otice   the   emission   of   water   vapour   at  
t

he   exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
  the   environment.
10
Checks

224
F Obtain  a   bottle   of   AdBlue®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank. F  
A
fter   emptying   the   bottle,   wipe   away   any  
s

pillage   around   the   tank   filler   using   a   damp  
c

loth.
F  
R
efit   the   blue   cap   to   the   tank   and   turn   it  
a
  6
th of a turn clockwise, to its stop.
F
 R
efit   the   black   plastic   blanking   plug,  
c

lipping   it   in   on   the   flap
F
 
D

etach   the   cord   from   the   parcel   shelf  
s

upport   and   lower   the   boot   floor.
Important:
 
if
 
your
 
vehicle's
 
AdBlue®
tank
 
is
 
completely
 
empty
 
-
 
which
 
is
 
c

onfirmed
 
by
 
the
 
alert
 
displays
 
and
  the  
i

mpossibility
 
of
 
starting
 
the
 
engine
 
-  
you
 
must
 
add
 
at
 
least
 
3.8 litres
 

(so
 
two
 
1.89
 
litre
 
bottles). If
  any   additive   is   split   or   splashed,   wash  
i

mmediately  
w
ith  
c
old  
w
ater  
o
r  
w
ipe  
w
ith  
a

  damp   cloth.
If   the   additive   has   crystallised,   clean   it  
o

ff   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up
after a breakdown because of a lack
of additive ,   you   must   wait   around  
5   minutes   before   switching   on   the  
ig

nition,
 w
ithout opening the
driver's door, locking the vehicle,
introducing the key into the ignition
switch, or introducing the key of the
"Keyless Entr y and Star ting" system
into the passenger compartment .
Switch   on   the   ignition,   then,   after  
10   seconds,   start   the   engine.
Never   dispose   of   AdBlue
® additive b
ottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 p

urpose
 o

r
 t

ake
 t

hem
 t
o
 y
our
 d
ealer.
Checks

252
12 V battery
The battery is located under the  bonnet.
For   access   to   the   (+)   terminal:
F
 
r
elease   the   bonnet   using   the   interior   lever,  
t

hen   the   exterior   safety   catch,
F
 
r
aise   the   bonnet   and   secure   it   with   its   stay,
F

l
ift the plastic cover for access to
the (+) terminal.
Access to the batteryProcedure for starting the engine  u sing   another  b
attery   or   charging   a   discharged   battery.
The presence of this label, in particular
with
  the   Stop   &   Start   system,   indicates
 t

he   use   of   a   12 V   lead-acid   battery   with
 s

pecial
 t
echnology
 a
nd
 s
pecification;
 t

he   involvement   of   a   CITROËN   dealer   or
 a

  qualified   workshop   is   essential   when
 r

eplacing   or   disconnecting   the   battery.After
  refitting   the   battery,   the   Stop   &  
S

tart   system   will   only   be   active   after   a  
c

ontinuous   period   of   immobilisation   of  
t

he   vehicle,   a   period   which   depends  
o

n the   climatic   conditions   and   the  
s

tate of   charge   of   the   battery   (up   to  
a

bout   8 hours).
Practical information

255
Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F  F ollow   the   instructions   for   use   provided   by  
t

he   manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered  
w
ith
 s
ulphate
 (

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
Reinitialisation after
reconnection
after any reconnection of the battery, switch on
the  ignition   and   wait   at   least   one   minute   before  
s

tarting,   to   allow   time   for   the   initialisation   of   the  
e

lectronic   systems.
By
  referring   to   the   corresponding   sections,   you  
s

hould   set   or   initialise   the   following   systems  
y

ourself:
-
 
o
ne-touch   electric   windows,
-
 
t
ime   and   date,
-
 
a
udio   and   navigation   system   settings.
Check
  that   no   alert   message   or   warning   lamp  
c

omes   on   after   switching   on   the   ignition.
However,
  if   minor   problems   persist   after  
c

arrying   out   these   operations,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
Reconnecting the (+) cable
F Position  the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
D
o   not   apply   excessive   force   on   the  
t

ab   as   locking   will   not   be   possible   if   the  
c

lamp   is   not   positioned   correctly;   start  
t

he   procedure   again. With
  Stop   &   Start,   the   battery   does   not  
h

ave   to   be   disconnected   for   charging.
11
Practical information

256
Load reduction modeE nergy ec onomy m ode
Switching to economy mode
Once this period has elapsed, a message a
ppears   in   the   screen   indicating   that   the  
v

ehicle   has   switched   to   economy   mode   and   the  
a

ctive   functions   are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically the   next   time   the   vehicle   is   driven.
F
 
I
n   order   to   resume   the   use   of   these  
f

unctions   immediately,   start   the   engine   and  
l

et   it   run   for   a   few   minutes.
The
  time   available   to   you   will   then   be   double  
t

he   period   for   which   the   engine   is   left   running.  
H

owever,   this   period   will   always   be   between  
f

ive   and   thirty   minutes.
System
 
which
 
manages
 
the
 
use
 
of
 
certain
 
f

unctions
 
according
 
to
 
the
 
level
 
of
 
charge
 
r

emaining
 
in
 
the
 
battery.
When
 
the
 
vehicle
 
is
 
being
 
driven,
 
the
 
load
 
r

eduction
 
function
 
temporarily
 
deactivates
 
c

ertain
 
functions,
 
such
 
as
 
the
 
air
 
conditioning,
 
t

he
 
heated
 
rear
 
screen...
The
 
deactivated
 
functions
 
are
 
reactivated
 
a

utomatically
 
as
 
soon
 
as
 
conditions
 
permit. System
 
which
 
manages
 
the
 
period
 
of
 
use
 
of
 
certain
  functions   to   conserve   a   sufficient   level   of  
c

harge
 
in
 
the
 
battery.
After
 
the
 
engine
 
has
 
stopped,
 
you
 
can
 
still
 
use
 
functions   such   as   the   audio   equipment,   windscreen  
w

ipers,
 
dipped
 
beam
 
headlamps,
 
courtesy
 
lamps,
 
etc.   for
 a m
aximum
 c
ombined
 p
eriod
 o
f  
t

hirty minutes.
A  flat   battery   prevents   the   engine   from  
s

tarting   (refer   to   the   corresponding  
par

agraph).
This
 
period
 
may
 
be
 
greatly
 
reduced
 
if
 
t

he
 
battery
 
is
 
not
 
fully
 
charged.
If
 
the
 
telephone
 
is
 
being
 
used
 
at
 
the
 
s

ame
 
time
 
on
 
the
 
navigation
 
system,
 i

t
 
w

ill
 
be
 
interrupted
 
after
 
1

0
 m

inutes.
Practical information

272
*  The  maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive 1 999/99/EC).
.../S:
 

model   fitted   with   Stop   &   Start.
.../1:  model
  fitted   with   low   rolling   resistance   tyres.
.../2:
 

model   fitted   with   very   low   rolling   resistance   tyres.
Petrol engine
Puretech 130 S&STHP 155
Gearbox Manual

(6- speed) EAT6 Automatic
(6- speed) ETG6 Electronic

(6- speed)
Model code:
NC... HNYM/S
HNYM/1S HNY T/S
HNY T/1S
HNY T/2S 5FV8/P
Cubic capacity (cc) 1   199
1   598
Bore   x   stroke   (mm)
70   x   90.5
77   x   85.8
Max   power*:   EU   standard   (kW)
96115
Max   power   engine   speed   (rpm)
5   500
6   000
Max   torque:   EU   standard   (Nm)
230240
Max   torque   engine   speed   (rpm)
1   750
1   400
Fuel UnleadedUnleaded
Catalytic converter Ye sYe s
Engine oil capacity (in litres) 3.54,25
Technical data

275
*  The  maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive 1 999/99/EC).
Diesel engines and gearboxes
.../S: model   fitted   with   Stop   &   Start.
.../1:  model   fitted   with   low   rolling   resistance   tyres   (for   example:   MICHELIN   Energy   Saver).
.../2:
 

model   fitted   with   very   low   rolling   resistance   tyres.
Diesel engine
HDi 90HDi 90 FAP BlueHDi 100 e-HDi 115
Gearbox Manual
(5 - speed) Manual
(5 - speed) Manual
(5 - speed) Manual
(6- speed) ETG6
Electronic (6- speed)
Model code:
NC... 9HJC

9HJC/1 9HP0BHY6
BHY6/1
BHY6/2S 9HD8/S

9HD8/1S
9HD8/2S 9HD8/1PS

9HD8/ 2PS
Cubic capacity (cc) 1   560
1   560
1   560
1   560
Bore   x   stroke   (mm)
75   x   88.3 75   x   88.3 75   x   88.3
75   x   88.3
Max   power*:   EU   standard   (kW)
6868 73 84
Max   power   engine   speed   (rpm)
4   000
4   000
3   750
3   600
Max   torque:   EU   standard   (Nm)
230230254 270
Max   torque   engine   speed   (rpm)
1   750
1   750
1   750
1   750
Fuel
die
sel
die
sel
die
sel
die
sel
Catalytic converter Ye sYe sYe s Ye s
Particle filter (F
aP
)
n
o
Ye s Ye s Ye s
Engine oil capacity (in litres) 3.753.753.75 3.75
12
Technical data

276
*  The  maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive 1 999/99/EC).
.../S:
 

model   fitted   with   Stop   &   Start.
.../1:
 

model   fitted   with   low   rolling   resistance   tyres   (for   example:   MICHELIN   Energy   Saver).
.../2:
 

model   fitted   with   very   low   rolling   resistance   tyres.
Diesel engine
BlueHDi 115BlueHDi 120HDi 150 FAPBlueHDi 150
Gearbox Manual
(6- speed) E AT 6
Automatic (6- speed) Manual
(6- speed) E AT 6
Automatic (6- speed) Manual
(6- speed) E AT 6
Automatic (6- speed)
Model code:
NC... BHXM/S
BHXM/1S
BHXM/2S BHX T/S
BHX T/1S
BHX T/2S BHZM/S
BHZM/1S
BHZM/2S BHZT/S
BHZ T/1S
BHZT/2S RHE8

RHE8/1 AHRM/S
AHRM/1S
AHRM/2S
Cubic capacity (cc) 1   560
1   560
1   997
1   997
Bore   x   stroke   (mm)
75   x   88.3
75   x   88.3
85   x   88 85   x   88
Max   power*:   EU   standard   (kW)
858811 011 0
Max   power   engine   speed   (rpm)
3   500
3   500
3   750
4   000
Max   torque:   EU   standard   (Nm)
300300340370
Max   torque   engine   speed   (rpm)
1   750
1   750
2   000 2   000
Fuel
die
sel
die
sel
die
sel
die
sel
Catalytic converter Ye sYe sYe sYe s
Particle filter (F
aP
)
Ye sYe sYe sYe s
Engine oil capacity (in litres) 3.753.755.256 .1
Technical data

309
Level 1
Level 2 Level 3 Comments
Navigation Settings
Navigation Enter destination
Display recent destinations.
Calculatory criteria
Fastest
Choose the navigation criteria.
The   map   displays   the   route   chosen   according   to   these  
criteria.
Shortest
Time/distance
Ecological
Tolls
Ferries
Strict
  -   Close
Show
  route   on   map
Display the map and start navigation.
ConfirmSave the options.
SaveSave the current address.
Stop navigationDelete the navigation information.
VoiceChoose the volume for voice and announcement of street names.
DiversionDetour from your initial route by a certain distance.
Navigation
Display in text mode.
Zoom   in.
Zoom
  out.
Display
  in   full   screen   mode.
Use
  the   arrows   to   move   the   map.
Switch
  to   2D   map.

05
314Towards a new destination
Choosing a new destination
Select "Enter destination".
Select "Save"
  to   save   the   address   entered   as   a  
contact

  entry.
The
  system   allows   up   to   200   entries. Select "Confirm" or press "Show route on
map"
  to   start   navigation   guidance.
Select "Address".
Select the "Country:"
  from   the   list   offered   then  
in

  the   same   way:  
the "

City:"   or   its   post   code,   the   "Road:",
the
"N°:".   Confirm   each   time. Select "Navigate to".
Choose
  the   restriction   criteria:   "Include
tollroads", "Include ferries", "Traffic", "Strict",
"Close". Choose   the   navigation   criteria:   "
Fastest" or
"Shortest" or "Time/distance" or "Ecological ".
To   delete   navigation   information,   press   on  
"

Settings" then "Stop navigation".
To
  restore   the   navigation   information   press   on  
"

Settings" then "Resume navigation".
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
NAVIGATION - GUIDANCE