ECO mode Citroen C4 AIRCROSS 2014 1.G Repair Manual

317
03 GENERAL OPERATION


Press the PWR/VOL
button.
The last source selected before
switching off resumes operation.
The audio system functions can be
used when the ignition switch is in the
"ON" or "ACC" position.
To switch off, press the PWR/VOL

button again.

Adjusting the volume

Turn the PWR/VOL
knob to the left to
decrease the volume or to the right to
increase it. Press the SEL
knob repeatedly; the
audio mode changes in the following
order: BASS / TREBLE / FADER /
BALANCE / SCV and cancel.
Setting the audio modes







Switching on / off

The audio adjustment mode is deactivated, during operation of the
radio or a CD or after around 10 seconds with no action.
Adjusting the audio modes

Turn the SEL
knob to the left or right
to adjust the audio setting.

321
04 RADIO


The "Radio Data System" (RDS) function on the FM waveband
permits:


- access to the display of information, such as the name of the
station, ...

- listening to the same station while travelling through different
regions,

- temporary tuning to traffi c information announcements.
Most FM stations use RDS. These stations transmit non-audible data
in addition to their programmes.
The data transmitted in this way allows you access to various
functions, mainly displaying of the name of the station, automatic
retuning to alternative frequencies or temporary retuning to traffi c
information announcements.
RDS allows you to continue listening to the same station by means
of alternative frequencies that carry the same station. However, in
certain conditions, RDS alternative frequencies may not be provided
throughout the country. Radio stations do not cover the whole country,
which explains the loss of reception of the station during a journey.
"AF" alternative frequencies

Your radio automatically checks and selects the best frequency for
the radio station to which it is tuned (if the station broadcasts on
several transmitters or frequencies).
The frequency of a radio station covers approximately 30 miles
(50 km). The change from one frequency to another explains the
temporary loss of reception during a journey.
If the station to which you are listening does not have several
frequencies in the region in which you are currently located, you can
deactivate alternative frequencies.

Some stations are organised in a network.
In different regions, they broadcast different or shared programmes
depending on the time of day.
You can follow:


- a regional station only,

- the entire network, with the possibility that you will be listening
to a different programme.

REG regional mode

On long distance journeys, when the stored station becomes weak,
the radio searches fi rst for another frequency for the same station
(AF). Then, if this fails, it searches for a frequency broadcasting the
regional programme (REG). If this also fails, the radio returns to the
stored station.



















RDS


Press the MENU
button.

Press the SEL
knob repeatedly to
select the RDS mode: "AF", "REG"
and "TP" then turn the knob to select
the desired value.

323

04 RADIO


Search for a "PTY" broadcast

Press the PTY/SCAN
button.

Ten seconds after reception, the PTY
mode is cancelled.
Press one of the six buttons "1" to "6" for more than
two seconds.
The sound cuts out then becomes audible again
when the programme has been stored.
The number of the button and the associated PTY
programme appear in the screen.
Presetting a "PTY" programme

You can preset up to six PTY programmes.
Each new programme stored replaces the previous one.

Turn the SEL
knob to select PTY
mode; the symbol fl ashes and an
automatic search is made.
Once the station has been found, its
name appears in the screen.

Press the " 
" or " 
" buttons to fi nd
another station.
Press the PTY/SCAN
button.

Turn the SEL
knob to select PTY

mode, then press one of the six
buttons "1" to "6" to defi ne the preset
location.

324
04 RADIO


Changing the display language of the "PTY" programme
Functions setting mode

This permits activation or deactivation
of the functions below.
Press the SEL
knob repeatedly; the
setting mode for the functions changes
in the following order : GRACENOTE
DB / AF / REG / TP-S / PI-S / PTY
(languages) / PH setting / CT / OFF.

The functions setting mode is deactivated after approximately
10 seconds without any action.

Press the MENU
button.

Press the SEL
knob repeatedly to
select the PTY lang
mode.

Turn the SEL
knob to select the
language (ENGLISH, FRANCAIS,
DEUTSCH, SVENSK, ESPAGNOL,
ITALIANO).
Press then MENU
button.

Turn the SEL
knob to the left to
deactivate the function ("OFF") or to
the right to activate it ("ON").

325
05 MUSIC MEDIA PLAYERS


This can play audio CDs (CD-DA, CD-Text, CD-R/RW) or
MP3 CDs.
Ejecting a disc
















CD player


Selecting CD mode

If the player already contains a disc,
press the MEDIA
button.
"MEDIA", the track number and the
playing time appear in the screen.

Insert circular compact discs only.
8 cm compact discs must be inserted in the centre of the player slot.
After inserting a disc, printed face upwards, the player starts
automatically.
Press this button to remove the
disc from the player. The system
automatically switches to radio mode.

Once ejected, if the compact disc is not removed within fi fteen
seconds, it is reloaded into the player.

326
05 MUSIC MEDIA PLAYERS


Random playing of a disc

Press the RDM
button to start random
play of the tracks on the disc. "RDM"
appears in the screen.
To exit this mode, press this button
again.
Audio CD

Press and hold the " 
" or " 
" button
to carry out a fast backwards or
forwards search respectively.
Play begins when the button is
released.
Fast search

Press the " 
" or " 
" button to select
the previous or next track respectively.
Selecting a track

Press the RPT
button to repeat
the play of the current track. "RPT"
appears in the screen.
To exit this mode, press this button
again.
Repeating a track
Playing the beginning of each track

Press the PTY/SCAN
button to start
playback of the fi rst ten seconds
of each track on the disc. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode, press this button
again.

On CD-R/RWs, the quality of the playback sound depends on the
encoding software, the burning device and the burning speed used.

327
05

CD-TEXT display


Press the DISP
button repeatedly; the
CD-Text information appears in the
following order:
DISC NAME / TRACK NAME /
NORMAL DISPLAY MODE.
The CD player is compatible with the display of CD-Text
information.

In the case of compact discs containing both CD-DA and MP3 fi les,
play automatically begins with the CD-DA fi les.
To switch play between the two types of fi le, press the CD
button for
more than two seconds until an audible signal is heard.
While using these compact discs, the "Repeat", "Random play" and
"Playing of the beginning of the tracks" functions are only applied to
fi les of the same format.
If the information exceeds
12 characters, press the PAGE
button
to see the rest.
In the absence of CD-Text information
to be displayed, "NOTITLE" appears
on the screen.








MP3 / ID3 Tag CD


Selecting an MP3 folder

Turn the SEL
knob to the right to
select a folder in ascending order or to
the left to select a folder in descending
order.
The CD player and the CD changer are compatible with the playing
of MP3 fi les.
These must be recorded in ISO-8859 Level 1 / Level 2, Joliet or
Romeo format on CD ROMs, CD-Rs or CD-RWs. The CDs can
contain a maximum of 255 fi les and 100 folders on 16 levels.
The ID3 version 1.0, 1.1, 2.2, 2.3 and 2.4 Tag can be displayed
while playing MP3 fi les.

MUSIC MEDIA PLAYERS

328
05 MUSIC MEDIA PLAYERS


Repeating the tracks in a folder

Press the RPT
button for more than
two seconds to repeat the playing of
the tracks contained in the current
folder. "D-RPT" appears in the screen.
To exit this mode, press this button
again.

Press the RDM
button to start random
playing of the tracks in the current
folder. "RDM" appears in the screen.
To exit this mode, press this button
again.
Playing the beginning of each track

MP3 / ID3 Tag display

Press the DISP
button repeatedly;
the MP3 information appears in the
following order:
FOLDER NAME / TRACK NAME /
NORMAL DISPLAY MODE.
Press the PTY/SCAN
button to start
playing the fi rst ten seconds of each
track in all of the folders. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode, press this button
again.

Random playing of a folder

Random playing of a disc

Press the RDM
button for more than
two seconds to start random playing of
the tracks in all of the folders. "D-RDM"
appears in the screen.
To exit this mode, press this button
again.
When play begins, "READING" appears in the screen then
disappears to make way for the folder number, the track number,
the playing time and "MP3".

329
05

Press the DISP
button for more than
two seconds to activate the ID3 Tag
information. "TAG" appears in the
screen.
Press the DISP
button repeatedly; the
Tag ID3 information appears in the
following order:
ALBUM NAME / TRACK NAME /
ARTIST NAME / NORMAL DISPLAY
MODE.
To deactivate this information, press
the DISP
button again for more than
two seconds.

If the information exceeds
12 characters, press the PAGE
button
to see the rest.
In the absence of MP3 or ID3
Tag information to be displayed,
"NOTITLE" appears in the screen.

On CD-R/RWs, the quality of the playing sound depends on the
encoding software, the burning device and the burning speed used.
Depending on the fl ow chart of the MP3 folders and fi les on the
disc, play may not begin immediately.


MUSIC MEDIA PLAYERS



















Using the auxiliary input (AUX)


The auxiliary socket, JACK or RCA,
permits the connection of portable
equipment (MP3 player...).

Do not connect a single piece of equipment via the USB port and
the JACK socket at the same time.

Connect the portable equipment (MP3 player…) to the JACK
socket or to the RCA-type audio sockets (white and red) using a
suitable cable, not supplied.

Press the MEDIA
button for more
than two seconds.
"AUX" appears in the screen and the
external mode is activated.
Press MEDIA
again to deactivate
the AUX
mode and change to
another mode.

JACK / RCA cable not supplied

331
06

Once the portable player / iPod ®
is
connected, make several successive
presses on the MEDIA
button and
select USB, the source selected is
displayed.
Once the player is selected, play
starts.
Play













Managing a track (or folder)


Stop

Press MEDIA
to change mode or on
RADIO
.
Turn the knob to select a previous or
next track.
Select a folder (or track)

Select a track
Press the knob to select the folder
and go down or up one level.

The knob can also be used for tracks.

USB PLAYER


Press the " 
" or " 
" button to select
the previous or next track respectively.
Press and hold to go faster.
Playing the start of each track

Press the PTY/SCAN
button to start
the play of the fi rst ten seconds of each
track in all folders. "SCAN" appears in
the screen and the corresponding track
number fl ashes.
Press this button again to quit this
mode.