pairing phone Citroen C4 AIRCROSS 2014 1.G Owner's Manual

247




BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION

For reasons of safety and because the sustained attention of the
driver is needed, operations of matching a Bluetooth ® mobile phone
with the audio system's hands-free function must be done with the
vehicle stationary
.

The systems says " Please say the 4 digits of a pairing cod

e
".

Press this button.

The system confi rms the validity of the number spoken,
answer " Ye s
".
Say " No
" to return to step 7.

Say " Pairing options
".










Pairing a Bluetooth ®
telephone
First connection


Say " Pair a telephone
".

Say " Confi gure
".
The system can register up to 7 Bluetooth
®
compatible mobile
telephones.
The telephone which has the highest level of priority is connected
automatically.

The system says " Do you wish to
pair
a telephone, delete a
telephone or obtain the list of paired telephones?
".
Say a 4-digit number which will be recorded as the pairing
code.

Remember this pairing code as you must enter it in the telephone in
one of the following steps of the matching procedure.

248

Consult your mobile telephone's user manual and enter
the pairing code recorded in step 7 in the telephone.





BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION

The system says " Start the
pairing
procedure on the telephone.
Consult the instructions in the telephone manual
".

If the code is incorrect, the system locks. To clear the code:


- check that the telephone's voice recognition is not activated,

- with the ignition on and the audio system active, press the END
CALL button for 2 seconds, 3 times in succession.


When it detects a Bluetooth
®
compatible mobile telephone,
the system says " Please say the name of the telephone after
the beep
".

After the audible signal, allocate a name to the telephone
by saying the name of your choice.
The system says " Allocate an order of priority between 1 and 7.
One is the highest level of priority
".

Give a number between 1 and 7 to establish the level of
priority of the mobile telephone.

The system says and confi rms the " name of the telephone
" and
the " number
" of its priority.

Answer " Ye s
".
Say " No
" to return to step 13.

The systems says " Pairing complete
" then emits an audible signal
and deactivates the voice recognition.
The services available depend on the network, the SIM card and the compatibility of the Bluetooth
®
telephone used. Check in your telephone
user manual and with your service provider for the services you have access to.

If the system does not detect the Bluetooth
®
compatible mobile
telephone, the matching process stops ands is accompanied by an
audible signal.
If you select a level of priority which has already been allocated to
another telephone, the system asks you if you wish to replace this
level of priority.

253









Voice commands (1/2)

Confi gure
Phone book
Dial
Call
Redial
Emergency number
Pairing options
Pair a telephone
Delete a telephone
List of paired telephones
Select a telephone
Previous
Press this button to start the voice recognition.


When the system is waiting for a voice command, say "Help" to obtain a list of commands which can be used in the current situation.
Divert the call
Add a location
Confi gure the confi rmation requests
Language
New entry
Delete
Change
Call this number
Change another entry
Try again
Clear all
List of names Home, at home
Work, at work
Mobile, on mobile
Pager, on pager
Help
Continue
All
Cancel
Mute
Deactivate mute
Yes
No





BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION

254

Voice commands (2/2)


Press this button to start the voice recognition.


When the system is waiting for a voice command, say " Help
" to obtain a list of commands which can be used in the current situation.
Zero
One
Two
Three
Four
Five
Six
Seven
Eight
Nine
Star (*)
Hash (#) Word training
PIN
Repeat training
Activate
Deactivate
Incorporate the call
Send




English
Phone book New entry
Phone book Change
Phone book Delete
Phone book Clear All
Phone book List of names
Confi gure the confi rmation requests
Confi gure Select a telephone
Confi gure the pairing options
Delete a name
Confi gure the language
Confi gure the PIN





BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION

289

Level 1


Level 2


Level 3


Comments




Calendar Make a note on the calendar of special days, birthdays, ...
Use the arrows to fi nd a date and press directly on the day required to
enter the event.

User SD Check the capacity of the SD card and the free space.


Voice Control Help Make a telephone call
Verify the use of voice commands. Busy tone
Manage the directory
Pairing


GPS Information Country View GPS information:


- the satellite position chart with the direction and movement of the
vehicle,

- the name of the current location,

- the longitude and latitude of the current location,

- the status of location measurement (2D = 3 satellites or less,
3D = 4 satellites or more),

- the number of satellites visible.

292
08

Press the MODE
button then " Bluetooth Audio
" to
start Bluetooth mode.










Pairing a telephone


In the Bluetooth menu on your telephone, select the
system name in the list of devices detected.
Enter the code " 1212
" in the telephone and confi rm.
Select the telephone to connect then press this
button.

Press " Select Device to Connect
".
Wait until the telephone detected is displayed.
Press SETTINGS
.
Press " Edit
" to connect the telephone.

Press " System
" then " Pairing
".
You can register or delete a device in the list.


BLUETOOTH ®
STREAMING - TELEPHONE

301

Level 1


Level 2


Level 3


Comments


Information on the track being played.
Repeat in a loop the track being played.
Play the fi rst 10 seconds of each track.
Play all tracks in random order.
Adjust the audio quality (balance, equaliser, ...).
Select a track or maintain pressure for fast forward or back.
Stop play of the track.
Play or pause the track.
Use the keypad to enter a number then click on the telephone.
Start the call.
Transfer the call from the vehicle to the mobile phone.
Cut the vehicle microphone (the contact no longer hears your voice but stays on
hold).
End the call.
Call back the last number.
Select a contact in the vehicle phone book.
Select a contact in the mobile phone book.
Select a contact and press "Edit" to view the numbers.
Select a telephone from the list of connected telephones.
Pair/connect a new telephone.
Delete a telephone from the list of connected telephones.
Register a code used for pairing telephones.
Lock the telephone keypad.
Erase all registered telephones.

303

Level 1


Level 2


Level 3


Comments


Display a black screen. Press the screen to return to the last display.
Adjust the touch tone.
Adjust the date and time.
Select the language for voice commands.
Adjust the brightness, contrast and black level for the menu screen, ...
Adjust the brightness, contrast and black level for the image from the rear
camera.
Adjust the sound level of each speaker.
Select the type of sound (rock, pop, hiphop, jazz, normal).
Select the type of surround (DTS, premidia wide) and the audio fi eld.
Adjust the depth of sound by optimising the compression of bass and treble
audio data.

SCV speed compensated volume Adjust the volume according to the speed of the vehicle.


Dolby Volume
Adjust the volume automatically according to audio source for clear and natural
sound.
Display the time continuously.
Activate station tracking (automatic selection of the strongest frequency).
Activate regional station tracking mode to track the frequency of a regional
station in the network.
Activate the temporary transfer to stations with traffi c information.
Activate station tracking according to programme/theme.
Select a telephone from the list of connected telephones.
Connect/pair a new telephone.
Delete a telephone from the list of connected telephones.
Register a code used for pairing telephones.
Display the version of the system.

310
07 BLUETOOTH ®
TELEPHONE


Press the MENU
button, then " Next
" to display
the choice of source.
Activate the Bluetooth function on the telephone
and ensure that it is "visible to all" (refer to the
confi guration instructions for your telephone).

Press " Phone
".

Press the arrow
.

Press " Bluetooth Setting
".
Press " Register Device
".













Pairing a Bluetooth ®
telephone from
the audio system
For reasons of safety and because the sustained attention of the
driver is needed, operations of matching a Bluetooth ® mobile phone
with the audio system's hands-free function must be done with the
vehicle stationary
.

" Hands Free system
" should be displayed on
your telephone.
Select it and then enter the code displayed in
the audio system.
Your telephone is added to the list in the audio
system.
If necessary, refer to the instructions for your
mobile telephone.

The services available depend on the network, the SIM card and
the compatibility of the Bluetooth
® telephone used.
Refer to the instructions for your telephone and to your service
provider for the services you have access to.