fuel Citroen C4 AIRCROSS RHD 2013.5 1.G User Guide

46
Monitoring
When the engine is
running, this indicates the
temperature of the coolant.






Range


When the engine is
running
, this indicates
the distance which can
still be travelled with the
fuel remaining in the tank
based on the average
fuel consumption over the
last few miles/kilometres
travelled.
This value may vary following a change
in the style of driving or the relief,
resulting in a large variation in the
current fuel consumption.
If you only add a few litres, the value
displayed will be incorrect. Therefore,
you must fill the tank whenever
possible.










Coolant temperature
gauge
If the bar is close to the critical
position located
on the right, the temperature is too high.
The symbol flashes when your engine is
overheating.


You must stop your vehicle as soon as it is
safe to do so.


Wait a few minutes before switching off the
engine.

When the range is less than 30 miles (50 km)
,
dashes are displayed.
Refuel as soon as possible. The display of the
range is updated.

Wait for the engine to cool before
topping up the level. The cooling system
is pressurised.
To avoid any risk of scalding, unscrew
the cap by two turns to allow the
pressure to drop.
When the pressure has dropped,
remove the cap and top up the level,
if necessary.
Contact a CITROËN dealer or a
qualified workshop.

When you disconnect the battery,
the previous fuel consumption data
is lost and the value displayed will be
different from that displayed before the
battery was disconnected. The distance
displayed must be considered an
approximate indication.

1
47
Monitoring

Average fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated
since the trip computer was
last reset.


Average speed
(km/h or mph)
This is the average speed
calculated since the trip
computer was last reset.


Current fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated over
the last few seconds.

This value may change following a
change in the style of driving or the relief.


If dashes "- - -" are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer or a
qualified workshop.




Resetting the information to zero

When the required information is displayed,
press the INFO
button for more than
two seconds to reset all of the information to
zero.
When the ignition is switched on, the zero reset
switches automatically from manual mode to
automatic mode.


Automatic

If the ignition key remains in the OFF position
for more than 4 hours, the information is reset
to zero automatically.

48
Monitoring
The various menus may change between the type 1
instrument panel and the type 2 instrument panel.

Adjusting vehicle settings


When the vehicle is
stationary
, it allows the
user to change the following
settings:


- the reset mode
for average fuel
consumption and
average speed,

)
Press and hold the INFO
button for a few
seconds to display the menu screen.

)
In the menu screen, press the INFO
button
to select a function from the list:

- the fuel consumption units,

- the temperature display unit,

- the display language,

- activation/deactivation of the sound when
pressing the INFO
button,

- the rest reminder display inter val,

- restore the factory settings.
To change the settings, you must stop
the vehicle and switch on the ignition.
Apply the parking brake and place the
gear lever in neutral.
With the ignition on
, press the INFO
button
on the dashboard, to the right of the instrument
panel, several times in succession until the
"SETTINGS MENU" screen is displayed.


Operation


MENU
1/3
:



- 1 - 2, A - M, A - P

* (choice of the type of
reset of average fuel consumption and
average speed),

- AVG UN I T
(choice of the fuel consumption
units),

- choice of the temperature display unit
,

- LANGUAGE
(option of the display
language),


*
According to display language.
For your safety, when the vehicle is
moving
, the function settings are not
displayed when you press the INFO

button.

1
49
Monitoring

MENU
2/3:



- a/b
(option of displaying a different
language in the instrument panel screen
and the navigation screen),

- activation / deactivation of the INFO

button sound
,

- ALERT
(changing of the "REST
REMINDER" display inter val),

- selection of the sound
of the direction
indicators,

- activation / deactivation of the current
fuel consumption
,
Press and hold the INFO
button for a
few seconds to return to the previous
screen.
When the menu screen is displayed,
if no operation is carried out within
15 seconds, the Settings Menu screen
is displayed.

MENU 3/3:



- RESET
(restore factory settings).




Choice of the reset mode for
average fuel consumption and
average speed
You can choose between two average fuel
consumption and average speed reset modes:


- automatic reset,

- manual reset.
In the menu screen:


)
press the INFO
button to select:

)
press and hold the INFO
button for a
few seconds to switch in succession from
reset mode 1
- A (automatic) *
to reset
mode 2 - M - P (manual) *
.
The mode selected is confirmed.



*
According to display language.

50
Monitoring

If the battery is disconnected, the
settings memory is cleared and
the default unit (km/L) is restored
automatically.

If the battery is disconnected, the
settings memory is cleared and
the default unit (°C) is restored
automatically.

)
press the INFO
button to scroll the units
(km/L, L/100km, mpg (US), mpg (UK) and
RETURN) in succession,

)
press and hold the INFO
button for a few
seconds to confirm your selection.




Choice of the temperature
display unit

)
press and hold the INFO
button for a few
seconds to scroll the units (°C and °F) in
succession.
The mode selected is confirmed. In the menu screen:


)
press the INFO
button to select the
temperature unit setting symbol
(thermometer):


Choice of the fuel consumption
unit
The distance, speed and quantity of fuel units
will also be changed in accordance with your
choice of fuel consumption unit.
In the menus screen:


)
press the INFO
button to select "UNIT"
.

)
press and hold the INFO
button for a
few seconds to display the "AVG U N I T "

screen.

1
53 Monitoring
On the menu screen:


)
press the INFO
button to select "RESET"

(located in menu 2/2 or 3/3 depending
on the instrument panel)
:



Restoring factory settings
(RESET)
You can restore all of the factory settings for all
functions.

)
press and hold the INFO
button for at least
5 seconds
.
There is an audible signal and all of the factory
settings are restored for all functions.
In the menu screen:


)
press the INFO
button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3)
:



Activation / deactivation of the
current fuel consumption *

You can activate or deactivate the display
of the current fuel consumption, with the
type 2 instrument panel only.

)
press and hold the INFO
button for a few
seconds to scroll through the choices in
succession (ON, OFF).



*
Depending on equipment.

In the menu screen:


)
press the INFO
button to select sound 1 or 2
(located in menu 2/3)
:





Selection of the sound
for the direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.

99
3
Comfort








Rear screen demist - defrost


Switching on

The rear screen demisting/defrosting can only
operate when the engine is running.

Switching off

The demisting/defrosting switches off
automatically to prevent an excessive
consumption of current.


)
It is possible to stop the demisting/
defrosting operation before it is switched
off automatically by pressing the button
again. The indicator lamp associated with
the button goes off.


)
Switch off the demisting/defrosting of the
rear screen and door mirrors as soon as
appropriate, as lower current consumption
results in reduced fuel consumption.
The control button is located on the air conditioning system control panel.


)
Press this button to demist/defrost
the rear screen and (depending
on version) the door mirrors. The
indicator lamp associated with the
button comes on.

114
Driving











Gear shift indicator *
System which reduces fuel consumption by advising the driver to change up on vehicles fitted with a manual gearbox.


Operation


*
According to engine.
The symbol appears in the
instrument panel suggesting that you
change up.
In the case of driving which makes
particular demands on the per formance
of the engine (firm pressure on the
accelerator pedal, for example, when
overtaking...), the system will not
recommend a gear change.
The system never suggests:


- engaging reverse gear,

- engaging a lower gear.

The system inter venes only when driving
economically.
Depending on the driving situation and your
vehicle's equipment, the system may advise
you to skip one or more gears. You can
follow this instruction without engaging the
intermediate gears.
The gear recommendations should not
be considered compulsory. In fact, the
configuration of the road, the amount of traffic
and safety remain determining factors when
choosing the best gear. Therefore, the driver
remains responsible for deciding whether or not
to follow the advice given by the system.
This function cannot be deactivated.

121
4
Driving








Stop & Start (Auto Stop & Go) function


Operation


Going into engine STOP mode

The "AS &G"
warning lamp comes on in
the instrument panel or the instrument
panel screen and the engine goes into
standby after a few seconds:


- with a manual gearbox
, with the vehicle
stationary and your foot on the brake, when
you put the gear lever into neutral and
release the clutch pedal.


Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key or the START/STOP
button.
When the engine is stopped
automatically, the operation of certain
vehicle systems, such as for example,
braking, power steering... are modified.
Ta k e c a r e
.


Special cases: STOP mode not
available
STOP mode is not invoked when:


- the driver's seat belt is not fastened,

- the bonnet is open,

- the vehicle has not exceeded 3 mph
(5 km/h) since the last engine start,

- the vehicle has restarted less than
10 seconds ago,

- the engine is needed to maintain a
comfortable temperature in the passenger
compartment,

- demisting is active,

- some special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.

- the "AS &G"
warning lamp is
flashing in the instrument panel.

This operation is per fectly normal.


The Stop & Start (Auto Stop & Go) function puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, or other...).
The engine restarts automatically as soon as you want to move off. The restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start (Auto Stop & Go) function reduces fuel consumption and exhaust emissions as well as the noise level when
stationary.

215
8
Checks
The various caps and covers allow access for
checking the levels of the various fluids, for
replacing certain components and for priming
the fuel system.














Diesel engines



1.
Screenwash and headlamp wash fluid
reservoir.

2.
Coolant reservoir.

3.
Brake fluid reser voir.

4.
Battery.

5.
Fusebox.

6.
Air filter.

7.
Engine oil dipstick.

8.
Engine oil filler cap.

9.
Priming pump * .

1.6
HDi 110


1.8 HDi 150



*
According to engine.