ECU Citroen C4 CACTUS RHD 2015 1.G Owner's Guide

208
Roof bars
For safety reasons and to avoid damaging   the   roof,   it   is   essential   to   use  
t

ransverse   roof   bars   that   are   approved  
f

or   your   vehicle.
Observe
  the   fitting   instructions   and  
t

he   conditions   of   use   given   in   the  
i

nformation   provided   with   the   roof   bars.Version without longitudinal
bars
To install the roof bars, you must secure them   only   to   the   four   anchorage   points   in   the  
r

oof   frame.   These   points   are   masked   by   the  
v

ehicle's   doors   when   closed.
The
  roof   bar   fixings   include   a   stud   that   should  
b

e   introduced   into   the   aperture   at   each  
anc

horage
 p
oint.
Version with longitudinal
bars
You must fit the transverse bars to the longitudinal   bars   at   the   fixing   points   indicated  
b

y   engraved   markings   on   the   longitudinal   bars.
Practical information

209
Maximum load, distributed over the roof bars,   for   a   loading   height   not   exceeding  
4

0   cm:   80 kg.
This
  value   is   subject   to   change,   please  
c

heck   the   maximum   load   stated   in   the  
i

nstructions   provided   with   he   roof   bars.
If
  the   height   exceeds   40   cm,   adapt   the  
s

peed   of   the   vehicle   to   the   profile   of   the  
r

oad   to   avoid   damaging   the   roof   bars  
a

nd   the   fixings   on   the   vehicle.
Please
  refer   to   national   legislation   so   as  
t

o   meet   the   requirements   on   carrying  
o

bjects   that   are   longer   than   the   vehicle.
Recommendations
F Distribute  the   load   evenly,   avoiding  ov
erloading   on   one   side.
F
 
A
rrange   the   heaviest   part   of   the   load   as  
c

lose   as   possible   to   the   roof.
F
 
A
nchor   the   load   securely   and   fit   a   warning  
f

lag   if   part   of   it   overhangs   the   vehicle.
F
 
D
rive   gently,   as   the   vehicle   will   be   more  
l

iable   to   the   effects   of   side   winds   (vehicle  
s

tability   may   be   affected).
F
 
R
emove   the   roof   bars   as   soon   as   they   are  
n

o
 lon
ger
 n
eeded.
9
Practical information

212
accessories
A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese   accessories   and   parts   are   all   suitable   for   your   vehicle   and   benefit   from   CITROËN's   recommendation   and   warranty.
"Comfort"
Door deflectors, side sun blinds, insulated module,   coat   hanger   fixed   to   head   restraint,  
m

obile   reading   lamp,   front   and   rear   parking  
s

ensors,   portable   ashtray,   scented   air  
f

reshener,   blind   for   sunroof...
"Transport systems"
boot carpet, boot liner, boot net, boot spacers,
transverse  roof   bars,   ski   carrier,   roof   box,  
t

owbar,   towbar   wiring   harness,   bicycle   carrier...
"Styling"
Leather gear lever knob, aluminium foot rest, alloy   wheels,   front   spoiler,   rear   diffuser,   exterior  
e

xpressive
 s
tickers...
"Security and safety":
Anti-intrusion alarm, vehicle tracking system, first   aid   kit,   fire   extinguisher,   warning   triangle,  
h

igh   visibility   vest,   wheel   security   bolts,   snow  
c

hains,   non-slip   covers,   front   foglamp   kit,   dog  
g

uard,   pet   seat   belt,   seat   belt   cutter/glass  
h

ammer...
"Protection"
Mats*, seat covers, mud flaps, vehicle cover, b oot...
If
 
a
 
towbar
 
and
 
wiring
 
harness
 
are
 
f

itted
 
outside
 
the
 
CITROËN
 
dealer
 
n

etwork,
 
the
 
installation
 
must
 
be
 
done
 
s

trictly
 
in
 
line
 
with
 
the
 
manufacturer's
 
r

ecommendations. *
 
T
o   avoid   any   risk   of   jamming   the   pedals:
-
 
e
nsure   that   mats   are   correctly   positioned  
a

nd   secured,
-
 
n
ever   fit   one   mat   on   top   of   another.
Practical information

52
Comfort

Folding the backrest

Repositioning the seat backrest




)
Straighten the seat backrest 2
and secure it.

)
Unfasten and return the seat belts to the
sides of the backrest.



)
Move the front seats for ward if necessary.

)
Position the seat belts on the backrest and
buckle them.

)
Place the head restraints in the low
position.



)
Press both controls 1
simultaneously to
release the seat backrest 2
.

)
Fold the seat backrest 2
on to the cushion.


When repositioning the backrest,
ensure that the seat belts are not
trapped and the red indicator, located
next to the controls 1
, is no longer
visible.






Rear seats
Bench seat with fixed one-piece cushion and folding one-piece backrest.

When folding the seat, the centre seat
belt should not be buckled but laid out
flat on the seat.






The rear seat cushion does not fold,
just the seat backrest can be folded to
increase the boot loading space.

112
Safety










Locations for ISOFIX child seats


In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX
mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A
to G
, is indicated on the child
seat next to the ISOFIX logo.






IUF:
seat suitable for the installation of an I
sofix U
niversal seat, F
or ward facing secured using the
upper strap.

IL-SU:
seat suitable for the installation of an I
sofix S
emi- U
niversal seat either:


- rear ward facing fitted with an upper strap or a support leg,

- for ward facing fitted with a support leg,


- an infant car seat fitted with an upper strap or a support leg.







Weight of the child
/ indicative age


Less than 10 kg
(group 0)
Up to about
6 months



Less than 10 kg

(group 0)
Less than 13 kg
(group 0+)




Up to about 1 year


From 9 to 18 kg (group 1)

From about. 1 to 3 years


Type of ISOFIX child seat



Infant car seat



rearward facing



rearward facing



forward facing




ISOFIX size category



F


G


C



D



E



C



D



A



B



B1




1 st
row
Front passenger seat

Not ISOFIX


2
nd
row
Outer rear seats


IL-SU*



IL-SU



IL-SU



IL-SU



IL-SU



IUF

IL-SU




Centre rear seat

Not ISOFIX


Remove and stow the head restraint before installing a child seat on a passenger seat.
Refit the head restraint once the child seat has been removed.


For more information on ISOFIX mountings
and the upper strap, refer to the corresponding
section.
The regulations on carrying children are
specific to each country. Refer to the legislation
in force in your country.
15C 4 C. A0 4 0 CANCELS AND REPLACES
* The ISOFIX infant car seat, secured on the lower rings of a vehicle ISOFIX seat, occupies
two rear seats.