pairing phone Citroen C4 CACTUS RHD 2015 1.G Owner's Manual

08
292
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   system   must  
be

  carried   out   with   the  
vehicle stationary
.
Select "Bluetooth Connection ".
Press on Telephone
 
to
 
display
 
the
 
primary
 
page

 
then
 
go
 
to
 
the
 
secondary
 
page. Select Search.
The
  list   of   telephones   detected   is   displayed.
Activate
 
the
 
telephone's
 
Bluetooth
 
function
 
and

 
ensure
 
that
 
it
 
is
 
"visible
 
to
 
all"
 
(telephone
 
configuration). Procedure (short) from the telephone
In

 
the
 
Bluetooth
 
menu
 
of
 
your
 
device,
 
select
 
the
 
system

 
name
 
in
 
the
 
list
 
of
 
devices
 
detected.
Enter
 
a
 
code
 
of
 
at
 
least
 
4
 
figures
 
in
 
the
 
device
 
and

 
confirm.
Enter
 
this
 
same
 
code
 
in
 
the
 
system,
 
select
 
"OK"
and
 
confirm.
Procedure from the system
The
  system   offers   to   connect   the   telephone:
-
 
in
  "Telephone"   (hands-free   kit,   telephone   only),
-
 
in
  "Audio streaming"   (streaming:   wireless   playing   of   audio   files  
from

  the   telephone),
-
 
in
  "Internet"   (internet   browsing,   only   if   your   telephone   is  
compatible

  with   the   "DUN"   Dial-Up   Networking   Bluetooth  
standard).
Select

  one   or   more   profiles   and   Confirm.
Select
  the   name   of   the   desired   peripheral   from  
the

  list   and   Confirm.
BLUETOOTH
If the telephone is not detected, it is recommended that you switch the  Bluetooth   function   on   your   telephone   off   and   then   on   again.
Enter
  a   code   of   at   least   4   figures   for   the  
connection then "Confirm

".
Enter
  this   same   code   in   the   telephone   then  
accept

  the   connection.

08
293
Depending
 
on
 
your
 
telephone,
 
you
 
may
 
be
 
asked
 
to
 
accept
 
automatic

 
connection
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on.
Depending
 
on
 
the
 
type
 
of
 
telephone,
 
the
 
system
 
will

 
ask
 
you
 
to
 
accept
 
or
 
not
 
the
 
transfer
 
of
 
your
 
contacts. The

 
services
 
available
 
depend
 
on
 
the
 
network,
 
the
 
SIM
 
card
 
and
 
the
 
compatibility

 
of
 
the
 
Bluetooth
 
telephone
 
used.
 
Check
 
the
 
telephone
 
manual

 
and
 
with
 
your
 
network
 
provider
 
for
 
details
 
of
 
the
 
services
 
available

 
to
 
you.
On
 
return
 
to
 
the
 
vehicle,
 
the
 
last
 
telephone
 
connected
 
automatically
 
reconnects,

 
within
 
around
 
30
 
seconds
 
after
 
switching
 
on
 
the
 
ignition
 
(Bluetooth

 
activated).
To
 
modify
 
the
 
automatic
 
connection
 
mode,
 
select
 
the
 
telephone
 
in
 
the

 
list
 
then
 
select
 
the
 
desired
 
profile.
The
 
telephone
 
is
 
added
 
to
 
the
 
list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,  
additional help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth"
  to   display   the   list   of   paired  
peripherals.
Select

  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

08
Receiving a call
An incoming call is announced by a ring and a superimposed display in  the   screen.
Make
  a   short   press   on   the   steering   mounted  
TEL

  button   to   accept   an   incoming   call.
Make
  a   long   press   on   the   steering   mounted  
TEL

  button   to   reject   the   call.
or
Select "End call".
Managing paired telephones
Press on Telephone to display the primary page   then   go   to   the   secondary   page.
Select "Bluetooth"
  to   display   the   list   of   paired  
peripheral

  devices.
Select
  the   peripheral   in   the   list.
Select:
-
 
"
Search" or "Disconnect" to connect or
disconnect
  the   Bluetooth   connection   with  
the

  peripheral   selected.
-
 
"
Delete"   to   remove   the   pairing.
BLUETOOTH
294This   function   allows   the   connection   or   disconnection   of   a   peripheral  
device

  as   well   as   the   deletion   of   a   pairing.