Citroen C4 DAG 2006.5 1.G Owner's Manual

4848
V
T E l E p H O N E
T E l E m a T I C s E R V I C E s
To benef it from the localised emergency service with vehicle location, you have:to have signed the general conditions of the service stated on your vehicle order form, or have signed the specifi c CITROËN the service stated on your vehicle order order
Emergency Contract,to have made an initial call to the CITROËN Emergency service.To initialise this service:press on the sOs button, with the vehicle stationary and parked in the open air in an area covered by your mobile telephone operator,be prepared to refer to your registration document,specify to the operator that you are mak-ing a “ CIT RO ËN Em er gency ser v ic e specify to the operator that you are mak-e ope
initialisation” call.
When should you use this service ?In an emergency situation (accident with injuries, assault, etc.).
How to access this service ?press on the sOs button of your NaviDrive.you are put in contact with our specialised assistance platform. an operator will rapidly assess the situation and if necessary send help to the spot.your vehicle is automatically located thanks to the gps function of your NaviDrive.

4949
V
MESSAGES RECEIVED
To read the messages relating to the benefi ts offered by your specifi c Service Contract.
T E l E p H O N E
T E l E m a T I C s E R V I C E s
When should you use this ser vice ?If your vehicle malfunctions (mechanical breakdown), this service puts you in contact with our CITROËN assistance platform to breakdown), this service puts you in contact this se
request a recovery vehicle.
Note: While making an assistance call, it is impossible to make other calls apart from an emergency call.
How to access this ser vice ?Keep the CITROËN button pressed.Orpress button CITROËN.select the CITROËN assistance menu.Validate.

505050
VI
A1A2A3
ABCD
A1
A2
A3
B2
D1
D2
D1
A4
B1B2B3
D2
A4
B1
B3
C
A
B
D
D3
D3
D4
D4
C O N F I g U R a T I O N
a C C E s s I N g T H E m E N U - s T R U C T U R E
The Confi guration menu enables you to programme your NaviDrive as well as certain functions of your vehicle.
WHAT ARE THE FUNCTIONS OF THE CONFIGURATION MENU ?
CONFIGURING THE DISPLAY OF YOUR NAVIDRIVE
Choose the colour of the display.
adjust the brightness of the display.
Adjust the date and the time and defi ne the format 12H or 24H.
Choose a feminine voice or a masculine voice and adj ust the voice synthesiser volume.
CONFIGURE THE VOICE OF YOUR NAVI DRIVE
CHOOSE THE LANGUAGE OF THE VOICE SYNTHESISER AND OF THE DISPLAY
Choose the duration for guide-me-home lighting and activate or deactivate the directional headlamps.
DEFINE THE VEHICLE PARAMETERS (ACCORDING TO EQUIPMENT )DEFINE THE V THE
Choose system of measurement: metric or imperial.
activate or deactivate the voice commands.
activate or deactivate the audio/video auxiliary inpu t.
activate or deactivate the automatic triggering of th e rear wiper when you engage reverse gear.
HOW TO ACCESS THE CONFIGURATION MENU ?
press button mENU.Rotate the control to select the Confi guration icon .press on the control to validate.

515151
VI
A
B
F
CDE
G
IH
a D J U s T I N g T H E D a T E a N D T H E T I m E
HOW TO ADJUST THE DATE AND THE TIME ?
In the confi guration menu:Rotate the control to select the menu A.press on the control to validate.

525252
VII
A
B
A
AB
V E H I C l E D I a g N O s I s
m E N U s T R U C T U R E
WHAT IS THE VEHICLE DIAGNOSIS MENU ?
The vehicle diagnosis menu accesses the latest alerts that have been signalled as well as the status of the various functions on the vehicle.
WHAT ARE THE FUNCTIONS OF THE VEHICLE DIAGNOSIS MENU ?
CONSULT THE LIST OF LATEST ALERTS SIGNALLED ON THE DISPLAY
C ONSULT THE STATUS OF THE VARIOUS FUNCTIONS ON THE VEHICLE (ACTIVATED OR DEACTIVATED )
HOW TO ACCESS THE VEHICLE DIAGNOSIS MENU ?
(according to equipment)
press button mENU.

535353
VIII
ABB1B2
B4
B1B2B3B4
A
A
B3
B
V I D E O
a C C E s s I N g T H E m E N U - s T R U C T U R E
WHAT IS THE VIDEO MENU ?
The Video menu comprises the functions for adjusting t he video on your NaviDrive.
WHAT ARE THE FUNCTIONS OF THE VIDEO MENU ?
ACTIVATING OR DEACTIVATING VIDEO MODE
H OW TO ACCESS THE VIDEO MENU ?
select a display format (16/9 or 4/3).SETTING THE VIDEO PARAMETERS
adjust the brightness of the display.
adjust the contrast on the display.
If you have equipment connected on the audio/video sockets, activation of video mode cuts the audio source currently being listened to. Press on but ton SOURCE to reactivate any other audio source.To view t he imag es, t he equip ment has to emit a signal and the vehicle must be stationar y. While the vehicle is in motion, only the sound is available.
To use this source, activate the video mode.The vid eo can be used if the vehicle speed is less than 5 km/h.
press button mENU.

545454
IX
F R E Q U E N T ly - a s K E D Q U E s T I O N s
QUESTIONSANSWERSSOLUTIONS
There is a discrepancy in sound quality between the different audio sources (radio, CD, CD changer etc.).
To achieve an optimum listening quality, the audio a djustments (Volume, Bass, Treble, ambiance, loudness) can be ad apted to each of the dif ferent sound sourc es, which c an produc e audible shif ts when you change the sourc e (radio, C D, CD changer etc.).
Check that the aUDIO adjustments ( Volume, Bass, Treble, ambiance and loudness) are adapted to your wishes for each of the audio sources.
The CD immediately ejects.The CD is the wrong way up, is unplayable, does not con tain audio data or contains an audio format that the radio cannot play back.
Check that you have inser ted the CD the right way up in the CD player.
Check the condition of the CD: the CD cannot be played back if it is too damaged.
Check the contents if it is a burnt CD: refer to the advice given in the chapter on audio system.
For reasons of poor quality, some burnt CDs will not be played back by the audio system.
The CD changer does not play back DVDs.
The CD changer does not play back mp3 CDs.
T h e C D p l a y e r s o u n d i s d o w n -graded.The CD is scratched or of poor quality.Inser t only CDs of good quality and keep them in good condition.
The pre-set stations do not work (no sound, 87,5 mhz is displayed, etc.).The waveband selected is not the correct one.press on the BaND button to retrieve the waveband (am,Fm1, Fm2, FmasT) where the stations are memo-rised.
Traf fi c Announcements ( TA) is dis-played. I do not receive any traffi c infor-mation or public announcements.
The par ticular radio station is not in the regional traf fi c informa-tion network.Change to a radio station that does broadcast traf fi c information.
The table below brings together the answers to the que stions that are the most frequently asked.

555555
IX
F R E Q U E N T ly - a s K E D Q U E s T I O N s
QUESTIONSANSWERSSOLUTIONS
The rec eption qualit y of the radio station being listened to gradually deteriorates.
The vehicle is too distant from the transmitter, or no transmitter is present in the geographical area you are passing th rough.
activate the RDs function to allow the system to chec k whether a more power ful transmitter is to be found in the geographical area.
The environment (hills, high buildings, tunnels, underground car parks, etc.) is blocking reception, even in RDs mode.This phenomenon is normal and does not imply anythi ng wrong with the radio.
The aerial is absent or has been damaged (for example after going through a car wash or in an underground car park).Have the aerial checked by a CITROËN dealer.
When the engine is not running, the radio stops after a few minutes.
When the engine is switched off, the working time fo r the radio depends on the batter y charge. The interruption is nor mal: the radio goes into economy mode, cutting off in order to save the vehicle’s batter y.
you have to star t the engine so as to increase the bat-ter y charge.
T h e m e s s a g e “ t h e a u d i o s y s t e m i s o v e r h e a t i n g ” a p p e a r s o n t h e screen.
In order to protect the audio equipment in excessiv e ambient temperatures, the radio goes into an automatic thermic protection mode which results in a reduction in sound volume or stopping of the CD player.
switch off the audio system for a few minutes in order to allow the system to cool down.
Why is one not informed in real time of a hold-up on the route even though the option for guidance by “traffi c info” is activated ?
When you star t up, the system takes a few minutes to c apture the traf fi c information via RDS-TMC.Wait for the traf fi c information to be safely received (pictogrammes displayed on the map) and make sure that you use the major ar terial roads to have “inform ed” navigation.
Only the major ar terial roads (motor ways and some d ual car-riageways) are featured in RDS-TMC traf fi c information).
It may happen that a hold-up is not repor ted by the tr af fi c info provider.
Why is a diversion not suggested when I have selected traf fi c info ?
Do not confuse the “traf fi c info” guidance option which can sug-gest a diversion (the “diver t” button appears in the w indow) with the menus “Display of traf fi c messages” or “Reading of traf fi c messages” which af fect only the display without recalculating the itinerar y (no “diver t” button in the window).
To have “informed” navigation with the detour proposi-tion, it is essential to activate the guidance option with “traf fi c info”.