display Citroen C4 PICASSO 2008 1.G Service Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2008 1.GPages: 266, PDF Size: 7.14 MB
Page 106 of 266
104
III
2 - Adjustment of temperature
The system can regulate temperature on an indepen-dent basis for the left hand side and right hand side as well as for the rear of the passenger compartment. Front and rear passengers can thus adjust their own temperatures.
To display the desired temperature, press button :
- – to decrease the temperature,
- + to increase the temperature.
An adjustment around 21 will provide an agreeable temperature level. However, depending on your prefe-rence, anything between 18 and 24 is quite normal.
For optimum comfort, it is recommended to avoid an adjustment difference greater than 3 between right and left.
Note : Actual temperatures experienced in the passenger compartment are dependent on external factors and for this reason might not be identical to those displayed.
On entering the vehicle, the inside temperature may be much colder (or hotter) than would be comfortable. It serves no purpose to alter the temperature displayed in an attempt to attain your preference more rapidly. The system automatically does all in its power to make up the difference in temperature as soon as possible.
A U T O M A T I C A I R C O N D I T I O N I N G
3 - Adjustment of the air blower speed
The air blower operates only when the engine is run ning (except when the REST function is activated).
T o a d j u s t t h e fl o w o f a i r , p r e s s o n t h e b u t t o n :
t o i n c r e a s e t h e a i r fl o w
t o d e c r e a s e t h e a i r fl o w ( t h i s b u t t o n a l s o h a s the REST function)
T h e l e v e l o f a i r fl o w i s i n d i c a t e d o n t h e d i s p l a y b y t h e p r o g r e s s i v e fi l l i n g o f t h e v e n t i l a t o r b l a d e s .
Note : If you place the air blower on position 0, the system is deactivated. The air blower display will be empty, with the indication OFF.
Function for retaining ventilation with the engine switched off
The REST function is available when you switch on the ignition and when you stop the engine.
This function allows you to retain ventilation in the passenger compartment for a few minutes, even with the engine stopped.
When you leave the vehicle, any passengers present c a n s t i l l h a v e t h e b e n e fi t o f a i r c i r c u l a t i o n , e v e n t h o u g h the engine is not running.
Page 107 of 266
III
105
A U T O M A T I C A I R C O N D I T I O N I N G
(Function for retaining ventilation with the engine switched off : REST function, continued…)
Engine stopped, ignition switched on :- The displays will light up, with the air blower shown empty as long as the function is available.- A press on the REST button activates the function for a timing of just a few minutes. Two blades of the b l o w e r w i l l fi l l t o s i g n i f y t h a t t h e f u n c t i o n i s a c t i v e .- It can be deactivated and reactivated during the timing.- At the end of the timing, the display will go off.
On stopping the engine :- The displays remain lit up, the blower is shown em pty and the function can be activated for 30 seconds.- A press on the REST button during the next 30 sec-onds activates the function for a timing of several min-utes. The duration and availability of the function are variable according to the state of charge of the battery (a protection to guarantee engine starting). Two blower b l a d e s fi l l u p t o s i g n i f y t h a t t h e f u n c t i o n i s a c t i v e . I t r e -mains active, even after the doors have been locked , until the end of the timing. - A f u r t h e r p r e s s b e f o r e t h e e n d o f t h e t i m i n g d e fi n i t i v e l y stops the function.
Note : This button does not activate the air conditioning, o n l y t h e a i r b l o w e r s . I n t h e R E S T f u n c t i o n , t h e a i r fl o w a n d distribution are controlled automatically and you c annot modify them.
4 - Adjustment of the air distribution- Press on button 4 s o t h a t t h e a i r fl o w s s c r o l l s u c c e s -sively on the display.
5 - Air recirculation
This button activates the recirculation of air within the passenger compartment and also has an automatic function.
The air distribution you have chosen is con- fi r m e d b y t h e l i g h t i n g o f t h e c o r r e s p o n d i n g warning lamps in the display.
There are 7 possible adjustments.
Entry of air in automatic mode (activated by default, in automatic comfort regulation)
Automatic mode makes use of an air quality sensor. This analyses the air and isolates the passenger com-partment from the exterior as soon as it detects the presence of pollutants. Then it automatically activates recirculation of cabin air.
1
Closing of the air inlet
- Press on button 5 to close off the entry of air from outside.2
Whilst retaining the other adjustments, this position enables the driver at any time to exclude any disa-greeable odours or fumes coming from outside the vehicle.
It should be cancelled as soon as possible to permit renewal of cabin air and to prevent misting.
- Press once on button 5 to return to the initial status (entry of air in automatic mode).
Note : The airrecirculation can also be accessed by means of a press on the control located low down to one side of the steering wheel (see “Fixed centred controls steering wheel").
Entry of air (manual mode)
- Press on button 5 to activate entry of air from the outside. The warning lamp goes out. 3
Page 108 of 266
106
III
A U T O M A T I C A I R C O N D I T I O N I N G
6 - Adjustment mode for the rear passengers8 - Deicing / demisting of the rear screen
This can only operate when the engine is running.
- Press on button 8 to activate/deactivate the electric deicing of the rear screen and, according to version, of the exterior rear view mirrors. The warning lamp lights up and the symbol appears on the display.
It switches off automatically to prevent excessive con-sumption of power
9 - Rapid deicing / demisting of the front and rear windows
- Press on button 9. The warning lamp lights up.
This button decides whether or not the rear passengers may use their adjustment controls.
There are three possible statuses for this button :
Locking of the rear passenger controlsThe driver imposes his adjustment on the rear passengers.
Authorisation of the rear passenger controls
The rear passengers can use their adjustment controls at their conven-ience.
C l o s i n g o f t h e a i r fl o w f o r t h e r e a r passengers
The supply of air is cut off.
7 - Panel display mode : black panel function
This function turns the displays and panel backlighting on or off.
- Function activated, a press on any button will light up the screen temporarily.
- A press on button 7 deactivates the function, lighting of buttons and screen is again permanent.
Note : This function optimises notably the visual com-fort for driving at night.
This function gives a rapid deicing / demisting of the vehicle simultaneously with :
- front deicing at optimum temperature,
- o p t i m u m a i r fl o w ,
- recirculation prohibition,
- deicing of the rear view mirrors and heated rear screen,
- air conditioning, if necessary.
Press again on button 9 or on " AUTO " to stop the function. Deicing of the rear view mirrors and heated rear screen remains activated.
10 - Air conditioning
- Press on button 10 to activate the air conditioning.
The A/C warning lamp lights up.
With additional air conditioning, in cold weather you are advised to close the supply of air to the rear pas-sengers (no hot air distribution possible via these air vents).
Page 110 of 266
1
2
108
III
AUTOMATIC AIR CONDITIONINGA D D I T I O N A L A I R C O N D I T I O N I N GC. REAR PASSENGER CONTROL PANELS
(RIGHT / LEFT)
1. Adjustment of temperature
The rear passengers can adjust their temperature controls independently via buttons + and -.
Note : Their preference cannot be greater than that of the driver by more t h a n 2 . T h e r e a c h i n g o f t h i s m a x i m u m p r e f e r e n c e i s c o n fi r m e d b y t h e fl a s h -ing of its display.
2. Adjustment of air blower speed
The air blower operates only when the engine is running.
T o a d j u s t t h e fl o w o f a i r , p r e s s o n b u t t o n :
t o i n c r e a s e t h e a i r fl o w
t o d e c r e a s e t h e a i r fl o w
T h e l e v e l o f a i r fl o w i s i n d i c a t e d o n t h e d i s p l a y b y t h e p r o g r e s s i v e fi l l i n g o f the ventilator blades.
B y d e c r e a s i n g t h e fl o w t o z e r o , y o u d e a c t i v a t e t h e a i r c o n d i t i o n i n g s y s t e m (OFF).
Note : y o u c a n a d j u s t t h e t e m p e r a t u r e a n d t h e a i r fl o w o n l y i f t h e d r i v e r enables you to (see button 6 of the driver’s control panel).
T h i s w a r n i n g l a m p s i g n i fi e s t h a t the passenger controls are locked , y o u c a n a d j u s t n e i t h e r t h e t e m p e r a t u r e n o r t h e a i r fl o w , which remain aligned on the preferences of the driver.
This warning lamp indicates that the supply of air is cut off.
Additional air conditioning allows you to optimise comfort levels in warm weather conditions. It pro-duces additional fresh air which is supplied using the rear air vents. The supply of warm air via the rear air vents is not possible using this system.
This position is recommended in cold weather conditions, as th e air vents do not supply warm air.
Page 153 of 266
B
150
III
T h e r e a r p n e u m a t i c s u s p e n s i o n e n h a n c e s d r i v i n g c o m f o r t b y m a i n t a i n i n g a c o n s t a n t b o d y h e i g h t w h a t -ever the vehicle load.
OPERATION
- I f t h e r e i s a n i n c r e a s e i n v e h i c l e l o a d , a s i n k i n g o f the rear of the vehicle is detected and the pneumatic s p r i n g s i n fl a t e i n o r d e r t o c o m p e n s a t e f o r t h e e x t r a w e i g h t . - I f t h e r e i s a n d e c r e a s e i n l o a d , a r i s i n g o f t h e r e a r o f t h e v e h i c l e i s d e t e c t e d a n d s o t h e p n e u m a t i c s p r i n g s d e fl a t e t o r e t u r n t h e v e h i c l e t o i t s n o m i n a l h e i g h t . - I f t h e v e h i c l e h a s b e e n u n u s e d f o r a l o n g p e r i o d , t h e p n e u m a t i c s p r i n g s m a y i n fl a t e i f n e c e s s a r y w h e n y o u unlock or open a door, so as to return the vehicle to i t s n o m i n a l h e i g h t .
Note: I f y o u d o n o t r e a c t i v a t e t h e s y s t e m m a n u a l l y , t h e a u t o m a t i c c o r r e c t i o n w i l l b e a c t i v a t e d a s s o o n a s t h e v e h i c l e s t a r t s t o m o v e . D u r i n g t h e c o r r e c t i o n , t h e S E R V I C E w a r n i n g l a m p l i g h t s u p a n d a m e s s a g e o n t h e s c r e e n r e m i n d s y o u n o t t o e x c e e d 1 0 k m / h ( 6 m p h ) .
Note : the automatic correction does not function if the d o o r s o r t h e t a i l g a t e a r e o p e n .
T h e a u t o m a t i c c o r r e c t i o n o p e r a t e s e v e n i f y o u r v e h i c l e i s i n e c o n o m y m o d e .
ACTIVATION / DEACTIVATION
The automatic correction can be deactivated :
- Press on the button B f o r a p p r o x i m a t e l y t w o s e c o n d s .
- R e l e a s e t h e b u t t o n w h e n y o u h e a r a b e e p . D e a c t i v a t i o n i s c o n fi r m e d b y t h e l i g h t i n g o f t h e L E D o n t h e b u t t o n B.
I t i s e s s e n t i a l t h a t y o u s h o u l d d e a c t i v a t e t h e s y s t e m i n t h e f o l l o w i n g i n s t a n c e s :
- w o r k i n g u n d e r t h e v e h i c l e ,
- c h a n g i n g a w h e e l ,
- t r a n s p o r t i n g t h e v e h i c l e o n a t r u c k o r o n a b o o t .
To reactivate the automatic correction :
- P r e s s a g a i n o n t h e b u t t o n B f o r a p p r o x i m a t e l y t w o s e c o n d s .
- R e l e a s e t h e b u t t o n w h e n y o u h e a r a b e e p . A c t i v a - t i o n i s c o n fi r m e d b y t h e e x t i n c t i o n o f t h e L E D o n t h e button B.
In the event of the system malfunctioning, alert messages, always in association with the SERVICE warning lamp, will display in the instrument panel. Contact a CITROËN dealer as soon as possiblewarning lamp, will display in the instrument pan, will d.
Grand C4 PicassoC4 Picasso
P N E U M A T I C S U S P E N S I O N
Page 156 of 266
IV
153
B U T T O N C O N T R O L S
AOn / Off.Volume adjust.
BCD eject.
CCD aperture.
DSOURCEOne press : Selection of sound source (Radio, CD, CD changer).
EBAND/AST
Short press : Selection of frequency bands and memory banks.Long press : Automatic pre-set function (Autostore).
FCall-up of audio adjustments :Sound ambiences, bass, treble, loudness, fade, balance, speed-sensitive volume.speed-sensitive volume.
GLIST
Radio source :- Short press : Display of the list of radio stations available (30 maximum).- Long press : Update of list of stations.CD source : Display of list of tracks of the CD.
HESCShort press : Cancel the current operation or delete a super-imposed display.Long press : Return to the permanent display.
ITA/PTYShort press : TA function (road information).Long press : PTY function (eélection of programme type).
J
Radio source : Manual search of higher frequencies.CD/MP3 changer source : Selection of the previous CD/CD-cover.Other sources : Scrolling in the Main Menu.
K
Radio source : Automatic search of higher frequencies.CD source, CD changer source and MP3 source :Forward search for tracks.- Long press : Fast forward with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
LOK
Button for validation and activation/deactivation of certain functions.If your vehicle has the Bluetooth system : Answer call, end call.
M
Radio source : Manual search of lower frequencies.CD/MP3 changer source : Selection of the next CD/CD-cover.Other sources : Scrolling in the Main Menu.
N
Radio source : Automatic search of lower frequencies.CD source, CD changer source and MP3 source :Reverse search for tracks.- Long press : Rewind with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
OMENUDisplay of the Main Menu.In certain countries, this control is deactivated while the vehicle is moving.
P
1-6
1-5
Radio source :- Short press : Recall of pre-set stations.- Long press : Memorisation.CD changer source : Selecting a CD.
QMUTE- First press : Temporary sound pause.- Second press : Restoration of sound.
RMODESelection of the type of information displayed.
SCD changer.
Page 157 of 266
154
IV
Multifunction screen A
T e c h n i c a l s p e c i fi c a t i o n s
Your Bluetooth compatible radio possesses :
-3 wavebands (MW/LW/FM).
-Dual tuner with RDS EON PTY, display of the PS n a m e , R D S p r o g r a m m e s e a r c h , T A t r a f fi c i n f o r m a -tion, 24 pre-selections (18 FM - 6 MW/LW), automatic memorisation of the AST strongest stations.
-An MP3- compatible CD reader.
-Audio power of 4 x 35 W.
Multifunction screen C
C O N T R O L S A T T H E S T E E R I N G W H E E L
The controls at the steering wheel give you access to certain functions, without you needing to use the radio-CD control panel.
1VOL +Volume increase
2
Radio source :Short press : Automatic search of higher frequencies.CD and CD changer source :Short press : Forward search for tracks.Long press : Fast forward with accelerated sound.
3
Radio source :Scrolling of pre-set stations.CD and MP3 source :Search of the track.CD changer source :Selection of next or previous CD.
4VOL -Volume decrease.
5MuteFirst press : Temporary sound pause.Second press : Restoration of sound.
6MENU
Access to the main menu to activate/deactivate or choose the adjustments for your vehicle.In certain countries, this control is deactivated while the vehicle is moving.
7OK
In a menu, a list, an alphabet :Validation of the function, the element or the value chosen.If your vehicle has the Bluetooth system : Answer call, end call
8Selection of the next or previous elements of a menu in a screen, a list, an alphabet.
9ESCShort press : Cancellation of the current operation.Long press : Return to the permanent display.
10MODESelection of type of information displayed on the right of the screen and, for screen A, choice of activation/deactivation of functions and adjustments.
11If your vehicle has the Bluetooth system : Press : Display of the “Directory” menu.
12If your vehicle has the Bluetooth system :Press : Activation of voice recognition.
Page 158 of 266
155
G E N E R A L F U N C T I O N S -
A U D I O A D J U S T M E N T S
On / Off
With the key in Drive position M, press on control A to switch the radio on or off.
Note :
- If the radio was on the last time you switched off the ignition, it will resume automatically when you switch on the ignition again. You will not have to press on control A.
- After switching off the ignition, you can still operate the audio system even without the ignition key be-ing present. Simply press on but-ton A. The system will turn itself off after approx.30minutes.
Anti-theft system
This radio is coded in such a way as to function only on your particu-lar vehicle. It would be unusable if installed on any other vehicle.
Note :
The anti-theft system is automatic and requires no action on your part.
Selection of source
To select either Radio, CD (CD already inserted and Radio source activated), or CD changer source, press on control D.
When you insert a CD it automati-cally starts being read.
Note :
When the radio is switched off, the source selected is memorised.
Volume adjustment
Rotate control A to increase or de-crease the sound volume.
You can also increase or decrease the volume using buttons 1 and 4at the steering wheel.
Note :
- The sound volume when you switch off the radio will be the same when you switch it on again.
- The radio sound volume auto-matically adjusts to the vehicle speed, provided the “volume ad-justment” function is activated.
Temporary sound pause
Press on control 5 at the steering wheel, or on the MUTE button, to activate this function.
The sound will be paused, regard-less of the source selected.
To restore the audio output, press one of the controls at the steering wheel.
Sound adjustments
Each press on button F brings up the parameter to be adjusted : c h o i c e o f p r e d e fi n e d s o u n d a m -biances, bass, treble, loudness, fade (front/rear sound distribu-tion), balance (left/right sound dis-tribution) and volume adjusted to vehicle speed.
Press buttons K or N to modify the values for the function displayed.
Note :
- The selection of a sound am-biance automatically adjusts bass and treble. These can be m o d i fi e d . T o r e s t o r e t h e o r i g i n a l adjustments for the musical am-biances, reset bass and treble to zero.
- Adjustment of loudness, as well as bass and treble when they a r e a v a i l a b l e , a r e s p e c i fi c t o each sound source and to each musical ambiance.
- If you leave the audio system un-actioned for a few seconds, it will revert to the normal display.
Page 159 of 266
IV
R A D I O S O U R C E
Notes on radio reception
Your radio will be subject to certain phenomena that are not encoun-tered by domestic systems.
The reception of AM and FM sig-nals may suffer from interference, which is caused by the nature and propagation of the signals and d o e s n o t r e fl e c t o n t h e q u a l i t y o f your radio installation.
In AM, the reception may be af-fected when passing under power lines or bridges, or when travelling through tunnels.
In FM mode, the reception may be affected by the distance from the s t a t i o n t r a n s m i t t e r , t h e r e fl e c t i n g o f signals off obstacles (mountains, hills, tower blocks) and radio blacks-pots (no coverage from the station transmitter).
Selection of radio source
Press button D to select the source.
Selection of frequencies and memory banks
Press button E successively to go through the memory banks FM1, FM2 and FM3, for the FM wave-band, and the memory banks MW/LW, for the AM waveband.
Manual search
Manual search is via buttons J or M.
By keeping button J or M pressed, you will be able to scroll through the waveband. Scrolling will stop as soon as you release the button. The radio will remain tuned to the frequency that is displayed.
Tuning sensitivity
Automatic searches can be car-ried out according to two levels of sensitivity :
- To capture the most powerful trans-mitters, choose the local search mode “LO” (default option).
- To capture the weakest or most distant transmitters, choose the sensitive search mode “DX”.
S e a r c h f o r a s t a t i o n i s d o n e fi r s t in “LO” (local) sensitivity, then in “DX” (distant) sensitivity.
To commence a search in sensi-tivity “DX” (distant) immediately , press twice in succession on one of the buttons K or N.
Automatic search
A short press on one of the but-tons K or N will tune into higher or lower radio stations respectively, within the chosen waveband.
By keeping button K or N pressed, you will be able to scroll through the waveband. The scrolling will s t o p a t t h e fi r s t s t a t i o n i t fi n d s o n c e the button is released.
You can also do this by means of control 2 at the steering wheel.
If the automatic search is unable to tune into a known frequency (perhaps owing to very weak re-ception), it is possible to search m a n u a l l y t o fi n d t h i s s t a t i o n .
Display and selection of a station available in the area in which you are travelling
B r i e fl y p r e s s o n b u t t o n G to bring up a list of stations, this is updated every 10 minutes.
You can also update this list at any time by giving a long press on button G.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.
Page 160 of 266
157
Manual pre-setting
Select the waveband and memory bank required using button E.
Select a station using either auto-matic or manual search.
Keep pressing for more than two seconds on one of the pre-selection buttons 1 to 6 on the keypad P.
The sound momentarily cuts off, then returns to its previous level to c o n fi r m t h a t i t h a s m e m o r i s e d t h e station.
Automatic memorisation of transmitters (Autostore function)
In FM, if you hold down button Efor more than two seconds, your radio will automatically memorise the 6 strongest stations on the FM3 memory bank.
The display shows “FM AST”.
The radio memorises the 6 strong-est transmitters, deleting the 6 previously memorised.
After the memorisation, the ra-dio goes directly to memory 1 of memory bank FM3.
Note :
- I f t h e t r a f fi c i n f o r m a t i o n f u n c t i o n has been activated (see RDS SYSTEM), the stations offering this facility will be memorised as priority.
- If it is unable to memorise any new stations, the system will re-tain the previously memorised stations.
- I f t h e s y s t e m i s u n a b l e t o fi n d 6 s t a t i o n s , t h e u n fi l l e d m e m o r y slots will remain free.
Recall of pre-set stations
Press button E b r i e fl y t o s e l e c t t h e required waveband and memory bank.
A short press on one the pre-selection buttons 1 to 6 on the keypad P recalls the correspond-ing memorised station. You can also do this using the control 3 at the steering wheel.
If it is a RDS station, the frequency appears some seconds before the name appears.
For RDS stations, recall of a sta-tion may prompt a search for a frequency corresponding to the region where you happen to be (see RDS system).
R A D I O S O U R C E