date Citroen C4 PICASSO 2008 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2008 1.GPages: 266, PDF Size: 7.14 MB
Page 43 of 266
L
J
H
MR
OO
M
JLH
OO
R
K
N
44
II
M U L T I F U N C T I O N S C R E E N A
To display the log of alerts :
1. Press on O.
2. Use J or M to select the sub- m e n u f o r o p t i o n s . C o n fi r m w i t h t w o p r e s s e s o n L.
Note : Y o u c a n c a n c e l t h e s t a r t o f t h e d i s p l a y b y p r e s s i n g b u t t o n R t o a b a n d o n a n d v a l i d a t i n g b y pressing L.
A l e r t s s i g n a l l e d p r e v i o u s l y b u t n o t r e s o l v e d , w i l l s c r o l l i n t h e d i s p l a y f o r r e c a l l .
To adjust the date and the time :
1. Press on O.
2. Use J or M to select the sub- m e n u f o r D i s p l a y A d j u s t m e n t s , t h e n c o n fi r m b y p r e s s i n g L.
3.Press J or M t o s e l e c t w h a t y o u w a n t t o m o d i f y : y e a r , m o n t h , d a y , h o u r , m i n u t e s , m o d e o f d i s p l a y .
4. M a k e y o u r a d j u s t m e n t b y p r e s s -ing K or KN . Y o u c a n c o n t i n u e y o u r a d j u s t m e n t s b y s e l e c t i n g a d i f f e r e n t e l e m e n t b y p r e s s e s o n J or M . W h e n y o u h a v e fi n i s h e d y o u r a d j u s t m e n t s , p r e s s L.
To choose the language :
1. Press on O.
2. Use J or M to select the sub- m e n u f o r L a n g u a g e s . C o n fi r m y o u r c h o i c e w i t h a p r e s s o n L.
3. With presses on K or KN , s e l e c t t h e l a n g u a g e o f y o u r c h o i c e , t h e n v a l i d a t e w i t h a p r e s s o n L.
To choose units :
1. Press on O.
2. Press J or M to select the sub- m e n u f o r U n i t s . C o n fi r m y o u r c h o i c e w i t h a p r e s s o n L.
3. Press J or M to select the type o f u n i t y o u w i s h t o m o d i f y ( T e m - p e r a t u r e o r F u e l C o n s u m p t i o n ) .
4. With presses on K or N , s e l e c t t h e u n i t o f y o u r c h o i c e , t h e n v a l i d a t e w i t h a p r e s s o n L.
Note : T h i s c h o i c e c o n c e r n s a l l t h e i n f o r m a t i o n ( C o n s u m p t i o n - S p e e d ) a p p e a r i n g o n t h e d i s p l a y s .
Page 44 of 266
123
L
J
H
MR
OII
45
M U L T I F U N C T I O N S C R E E N C
Main Menu
Press on the button O to view the "Main Menu" of the multifunction screen. This menu gives you ac-cess to the following functions :
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.
1 - Time
2 - Outside temperature
3 - Date and display zone
When the outside temperature is between +3 °C and -3 °C, the dis- p l a y o f t e m p e r a t u r e fl a s h e s ( i c e risk).Radio-CD
( S e e R a d i o - C D )
Trip computer, for :
- Entering the distance to your destination
- A c c e s s t o t h e l o g o f a l e r t s ( r e c a l l of alerts signalled previously)
- Access to the status of functions, such as automatic headlamps and windscreen wipe.
Personalisation - C o n fi g u r a t i o n , f o r a c t i v a t i n g / d e a c t i v a t i n g :
- operation of the rear wiper
- automatic guide-me-home lighting- Xenon dual-function directional headlamps
- electronic parking brake automatic f u n c t i o n s ( a p p l i c a t i o n / r e l e a s e )
- door selectivity
- lighting of daytime-running lampsand for choosing :- brightness intensity, time, date and units
- the display language
Bluetooth® hands-free kit
( S e e R a d i o - C D )
Note : The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the "Main Menu"
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the func-tion chosen or the value m o d i fi e d
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed p e r m a n e n t l y ( d a t e , r a d i o -CD, trip computer) on the right of the screen
Page 45 of 266
L
J
H
MR
O
M
JLH
O
R
K
N
46
II
PERSONALISATION and
CONFIGURATION
T o a c t i v a t e / d e a c t i v a t e r e a r s c r e e n w i p e w h e n y o u e n g a g e r e v e r s e g e a r :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n fi r m your choice with a press on L.
4. Using J or M, select "park- i n g a s s i s t a n c e " . C o n fi r m y o u r choice with a press on L.
5. Then by pressing L , s e l e c t /deselect triggering of rear screen wipe in reverse gear, t o a c t i v a t e / d e a c t i v a t e t h i s .
6. Validate with "OK" on the dis-play.
TRIP COMPUTER
To enter the distance to be travelled in the trip computer :
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con- fi r m y o u r c h o i c e w i t h a p r e s s on L.
3. Press J or M to select entry of d i s t a n c e . C o n fi r m y o u r c h o i c e with a press on L.
4. To choose the distance, select t h e fi g u r e y o u w i s h t o m o d i f y via J or M , t h e n c o n fi r m y o u r choice with a press on L.
5. Using J or M, adjust the value then validate with a press on L.
6. Validate with "OK" on the dis-play.
T o a c c e s s t h e l o g o f a l e r t s i n the trip computer:
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con- fi r m y o u r c h o i c e w i t h a p r e s s on L.
3. Select the log of alerts.
4. When you see the list displayed, scroll down using J or M.
5. Press on H, to return to the permanent display.
To access the status of functions, proceed in a similar manner.
T o a c t i v a t e / d e a c t i v a t e t h e a u t o m a t i c g u i d e - m e - h o m e l i g h t i n g :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n fi r m your choice with a press on L.
4. Using J or M, select "lighting a n d s i g n a l l i n g " . C o n fi r m y o u r choice with a press on L.
5. Then by pressing L , s e l e c t /deselect "guide-me-home l i g h t i n g " t o a c t i v a t e / d e a c t i v a t e this. After activation, choose its duration : press on L, then use J or M to select the dura-tion and then press on L.
6. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C
Page 46 of 266
L
J
H
MR
OII
47
3. Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n fi r m your choice with a press on L.
4. Using J or M, select "access t o t h e v e h i c l e " . C o n fi r m y o u r choice with a press on L.
5. Then by pressing L, select the status of the vehicle access as desired.
6. Validate with "OK" on the dis-play.
T o a c t i v a t e / d e a c t i v a t e l i g h t i n g o f d a y t i m e - r u n n i n g l a m p s ( d e p e n d i n g o n c o u n t r y ) :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n fi r m your choice with a press on L.
4. Using J or M, select "lighting a n d s i g n a l l i n g " . C o n fi r m y o u r choice with a press on L.
5. Then by pressing L , s e l e c t /deselect "daytime-running l a m p s " t o a c t i v a t e / d e a c t i v a t e the function.
6. Validate with "OK" on the dis-play.
T o a c t i v a t e / d e a c t i v a t e t h e Xenon dual-function directional headlamps :
1. Press on O.2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n fi r m your choice with a press on L.4. Using J or M, select “driv- i n g a s s i s t a n c e ” . C o n fi r m y o u r choice with a press on L.5. Then by pressing L , s e l e c t /deselect Xenon dual-function directional headlamps to acti- v a t e / d e a c t i v a t e t h e m .6. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C
T o a c t i v a t e / d e a c t i v a t e t h e e l e c t r o n i c p a r k i n g brake automatic functions ( a p p l i c a t i o n / r e l e a s e ) :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n fi r m your choice with a press on L.
4. Using J or M, select “driv- i n g a s s i s t a n c e ” . C o n fi r m y o u r choice with a press on L.
5. Then by pressing L , s e l e c t /deselect "automatic parking b r a k e " t o a c t i v a t e / d e a c t i v a t e the electronic parking brake a u t o m a t i c f u n c t i o n s ( a p p l i c a - t i o n / r e l e a s e ) .
6. Validate with "OK" on the dis-play.
T o a c t i v a t e / d e a c t i v a t e t h e d o o r selectivity :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
Page 47 of 266
L
J
H
MR
O
M
JLH
O
R
K
N
48
II
To choose the units :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. S e l e c t t h e d i s p l a y c o n fi g u r a t i o n using J or M . C o n fi r m w i t h a press on L.
4. Then select the sub-menu for u n i t s . C o n fi r m y o u r c h o i c e with a press on L.
5. Using J or M, select the unit y o u w i s h t o m o d i f y ( T e m p e r a -ture or Consumption), then validate by pressing L.
6. Validate with "OK" on the dis-play.
Note : This choice concerns all the i n f o r m a t i o n ( C o n s u m p t i o n - S p e e d ) appearing on the displays.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. S e l e c t t h e d i s p l a y c o n fi g u r a t i o n using J or M " . C o n fi r m w i t h a press on L.
4. Select the adjustment for the date and the time, using J or M . C o n fi r m w i t h a p r e s s o n L.
5. Press J or M to select the values you wish to modify. C o n fi r m y o u r c h o i c e w i t h a press on L.
6. Make your adjustments by pressing J or M, validating each adjustment choice by pressing L.
7. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C
T o c h o o s e t h e l a n g u a g e :
1. Press on O.
2. Use J or M to select "Person- a l i s a t i o n - C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r c h o i c e w i t h a press on L.
3. Make your choice of language, using J or M.
4. Using J or M, select the lan-guage and validate your choice with a press on L.
5. Validate with "OK" on the dis-play.
Page 48 of 266
L
J
H
MR
O
M
K
O
RHJL
N
12345II
49
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed p e r m a n e n t l y ( d a t e , r a d i o -CD, trip computer) on the right of the screen
Main Menu
Press on the button O to view the "Main Menu" of the multifunction screen.
This menu gives you access to the following functions :
Trip computer
( S e e N a v i D r i v e i n s t r u c t i o n s )
Directory
( S e e N a v i D r i v e i n s t r u c t i o n s )
Telematics
( S e e N a v i D r i v e i n s t r u c t i o n s )
C o n fi g u r a t i o n , for adjusting v a r i o u s p a r a m e t e r s ( d a t e , time, units)
( S e e N a v i D r i v e i n s t r u c t i o n s )
Map
( S e e N a v i D r i v e i n s t r u c t i o n s )
Video
( S e e N a v i D r i v e i n s t r u c t i o n s ) N a v i g a t i o n / g u i d a n c e
( S e e N a v i D r i v e i n s t r u c t i o n s )
Audio
( S e e N a v i D r i v e i n s t r u c t i o n s )
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.1- Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
When the outside temperature is between +3 °C and -3 °C, the dis- p l a y o f t e m p e r a t u r e fl a s h e s ( i c e risk).
Note: The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the "Main Menu"
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the function c h o s e n o r t h e v a l u e m o d i fi e d
M U L T I F U N C T I O N S C R E E N D T
Page 141 of 266
138
III
G l o v e b o x
T o o p e n , p u l l o n t h e h a n d l e a n d l o w e r t h e l i d .
I t a l s o h a s a u t o m a t i c l i g h t i n g .
T h e g l o v e b o x h a s a n a r e a s p e c i a l l y f o r s t o w i n g t w o c a r t r i d g e s f o r t h e s c e n t e d a i r f r e s h e n e r .
A i r c o n d i t i o n e d g l o v e b o x
I t m a y b e r e f r i g e r a t e d , d e p e n d i n g o n y o u r v e h i c l e ’ s e q u i p m e n t , b y a v e n t i l a t i o n d u c t t h a t c a n b e c l o s e d o f f m a n u a l l y .
I t i s d i r e c t l y l i n k e d t o t h e v e h i c l e ’ s a i r c o n d i t i o n i n g s y s t e m , b e i n g s u p p l i e d w i t h f r e s h a i r w h a t e v e r t h e r e - q u i r e m e n t s o f t h e p a s s e n g e r c o m p a r t m e n t .
Note : T h e r e f r i g e r a t i o n o f y o u r g l o v e b o x o n l y o p e r - a t e s w h e n t h e e n g i n e i s r u n n i n g a n d t h e a i r c o n d i t i o n - i n g i s o n .
F o r r e a s o n s o f s a f e t y , t h e g l o v e b o x s h o u l d r e m a i n c l o s e d w h e n t h e v e h i c l e i s m o v i n g .
Dedicated refrigerated storage
V e h i c l e s w i t h a n e l e c t r o n i c g e a r b o x or an automatic g e a r b o x p o s s e s s d e d i c a t e d r e f r i g e r a t e d s t o r a g e s i t - u a t e d a t t h e c e n t r e o f t h e d a s h b o a r d ( d e p e n d i n g o n model).
To open, p u l l o n t h e h a n d l e a n d l o w e r t h e l i d. T h e r e f r i g e r a t e d s t o r a g e h a s a v e n t i l a t i o n d u c t . I t i s d i - r e c t l y l i n k e d t o t h e v e h i c l e ’ s a i r c o n d i t i o n i n g s y s t e m , a n d i s s u p p l i e d w i t h f r e s h a i r w h a t e v e r t h e r e q u i r e m e n t s o f t h e p a s s e n g e r c o m p a r t m e n t a n d r e g a r d l e s s o f t h e o u t -side temperature.It can accommodate for example a 1.5 litre bottle and t w o 0 . 5 l i t r e b o t t l e s .
T w o c u p h o l d e r s a r e a v a i l a b l e w h e n t h e l i d i s o p e n .
T h e r e f r i g e r a t e d s t o r a g e h a s a u t o m a t i c l i g h t i n g .
Note : T h e r e f r i g e r a t i o n o f t h i s s t o r a g e a r e a o n l y o p e r - a t e s w h e n t h e e n g i n e i s r u n n i n g a n d t h e a i r c o n d i t i o n - i n g i s o n .
I N T E R I O R C O M F O R T
Page 156 of 266
IV
153
B U T T O N C O N T R O L S
AOn / Off.Volume adjust.
BCD eject.
CCD aperture.
DSOURCEOne press : Selection of sound source (Radio, CD, CD changer).
EBAND/AST
Short press : Selection of frequency bands and memory banks.Long press : Automatic pre-set function (Autostore).
FCall-up of audio adjustments :Sound ambiences, bass, treble, loudness, fade, balance, speed-sensitive volume.speed-sensitive volume.
GLIST
Radio source :- Short press : Display of the list of radio stations available (30 maximum).- Long press : Update of list of stations.CD source : Display of list of tracks of the CD.
HESCShort press : Cancel the current operation or delete a super-imposed display.Long press : Return to the permanent display.
ITA/PTYShort press : TA function (road information).Long press : PTY function (eélection of programme type).
J
Radio source : Manual search of higher frequencies.CD/MP3 changer source : Selection of the previous CD/CD-cover.Other sources : Scrolling in the Main Menu.
K
Radio source : Automatic search of higher frequencies.CD source, CD changer source and MP3 source :Forward search for tracks.- Long press : Fast forward with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
LOK
Button for validation and activation/deactivation of certain functions.If your vehicle has the Bluetooth system : Answer call, end call.
M
Radio source : Manual search of lower frequencies.CD/MP3 changer source : Selection of the next CD/CD-cover.Other sources : Scrolling in the Main Menu.
N
Radio source : Automatic search of lower frequencies.CD source, CD changer source and MP3 source :Reverse search for tracks.- Long press : Rewind with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
OMENUDisplay of the Main Menu.In certain countries, this control is deactivated while the vehicle is moving.
P
1-6
1-5
Radio source :- Short press : Recall of pre-set stations.- Long press : Memorisation.CD changer source : Selecting a CD.
QMUTE- First press : Temporary sound pause.- Second press : Restoration of sound.
RMODESelection of the type of information displayed.
SCD changer.
Page 159 of 266
IV
R A D I O S O U R C E
Notes on radio reception
Your radio will be subject to certain phenomena that are not encoun-tered by domestic systems.
The reception of AM and FM sig-nals may suffer from interference, which is caused by the nature and propagation of the signals and d o e s n o t r e fl e c t o n t h e q u a l i t y o f your radio installation.
In AM, the reception may be af-fected when passing under power lines or bridges, or when travelling through tunnels.
In FM mode, the reception may be affected by the distance from the s t a t i o n t r a n s m i t t e r , t h e r e fl e c t i n g o f signals off obstacles (mountains, hills, tower blocks) and radio blacks-pots (no coverage from the station transmitter).
Selection of radio source
Press button D to select the source.
Selection of frequencies and memory banks
Press button E successively to go through the memory banks FM1, FM2 and FM3, for the FM wave-band, and the memory banks MW/LW, for the AM waveband.
Manual search
Manual search is via buttons J or M.
By keeping button J or M pressed, you will be able to scroll through the waveband. Scrolling will stop as soon as you release the button. The radio will remain tuned to the frequency that is displayed.
Tuning sensitivity
Automatic searches can be car-ried out according to two levels of sensitivity :
- To capture the most powerful trans-mitters, choose the local search mode “LO” (default option).
- To capture the weakest or most distant transmitters, choose the sensitive search mode “DX”.
S e a r c h f o r a s t a t i o n i s d o n e fi r s t in “LO” (local) sensitivity, then in “DX” (distant) sensitivity.
To commence a search in sensi-tivity “DX” (distant) immediately , press twice in succession on one of the buttons K or N.
Automatic search
A short press on one of the but-tons K or N will tune into higher or lower radio stations respectively, within the chosen waveband.
By keeping button K or N pressed, you will be able to scroll through the waveband. The scrolling will s t o p a t t h e fi r s t s t a t i o n i t fi n d s o n c e the button is released.
You can also do this by means of control 2 at the steering wheel.
If the automatic search is unable to tune into a known frequency (perhaps owing to very weak re-ception), it is possible to search m a n u a l l y t o fi n d t h i s s t a t i o n .
Display and selection of a station available in the area in which you are travelling
B r i e fl y p r e s s o n b u t t o n G to bring up a list of stations, this is updated every 10 minutes.
You can also update this list at any time by giving a long press on button G.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.
Page 161 of 266
IV
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system,.
The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data provides access to various functions described in this chapter, such as: display of the station name, inter- m i t t e n t t r a f fi c i n f o r m a t i o n fl a s h e s o r automatic scanning of stations. This enables you to continue listening to your chosen radio station, regard-less of the different frequencies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best pos-sible reception by continuously looking for any other frequencies on which the selected radio sta-tion is broadcast, automatically choosing the frequency offering the best reception (providing the station broadcasts on more than one transmitter or frequency).
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus :
- Main menu (press button O).
- Audio menu (press button L).
To activate/deactivate the RDS functions on multifunction screen C :
1. Press button O.
2. Select the AUDIO icon using buttons J or M.
3. C o n fi r m y o u r c h o i c e w i t h a press on button L.
4. Select the sub-menu for the FM waveband, via buttons Jor M . C o n fi r m y o u r c h o i c e w i t h a press on button L.
5. Select scanning for RDS sta-tions, via buttons J or M.
6. Validate your choice with a press on button L.
7. Using control L, select/dese-lect to activate/deactivate the function.
8. Validate your choice by select-ing “OK” on the display.
To activate/deactivate the RDS functions on multifunction screen A :
1. Press button O.
2. Select the AUDIO-CD icon via buttons J or M.
3. Select scanning for RDS sta-tions, via buttons J or M. The system tells you the status (ac-tive or inactive) of the function.
4. Modify this status via buttons K or N.
5. Then please wait for the dis-play to disappear.
Note :
If the RDS function is active :
The “RDS” on the display will light up provided the station being re-ceived uses the RDS system with scanning of frequencies.
The “RDS” on the display is barred if the station received uses the RDS system without frequency search.
If your RDS function is deactiva-ted, the “RDS” on the display will be absent in all cases.
The display will indicate the “NAME” for the stations that use the RDS system and the frequency for stations that do not use it.
R D S S Y S T E M