service reset Citroen C4 PICASSO 2009.5 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009.5, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2009.5 1.GPages: 338, PDF Size: 13 MB
Page 21 of 338

24
I
I N S T R U M E N T S   a n d   C O N T R O L S
               MONOCHROME INSTRUMENT PANEL 
 MULTIFUNCTION SCREEN A 
 The instrument panel groups all the driving and comfort information at the centre of the dashboard. 
   
1.    Rev counter 
  
2.    Electronic  gearbox  or  automatic 
gearbox  selector  position  and  
gear 
  
3.    Electronic  gearbox  or  automatic 
gearbox "Foot on brake" warning 
lamp 
  
4.    Speedometer 
  
5.    Cruise  control  or  speed  limiter 
setting 
  
6.    Fuel gauge    
7.    Trip mileage recorder 
  
8.    Multifunction screen A 
  
9.    Total mileage recorder  
  In  this  zone,  the  following  infor- mation  appears  in  succession 
when the ignition is switched on: 
   -   service indicator,  
  -   engine oil level indicator, 
  -   total mileage recorder.        
A.    Lighting  rheostat  (available  day 
and night) 
  
B.    Trip mileage recorder reset 
  
C.    Personalisation  of  the  instru-
ment  panel  (display  of  desired  
information) 
  
D.    CHECK (list of alerts)   
  Central display    Control buttons    
Page 22 of 338

25 
I
I N S T R U M E N T S   a n d   C O N T R O L S
             TWO - TONE INSTRUMENT PANEL 
 MULTIFUNCTION SCREEN C 
 The instrument panel groups all the driving and comfort information at the centre of the dashboard. 
   
1.    Rev counter 
  
2.    Electronic  gearbox  or  automatic 
gearbox selector position and gear 
  
3.    Electronic  gearbox  or  automatic 
gearbox "Foot on brake" warning  
lamp 
  
4.    Speedometer 
  
5.    Cruise  control  or  speed  limiter 
setting 
  
6.    Fuel gauge    
7.    Trip mileage recorder 
  
8.    Multifunction screen C 
  
9.    Total mileage recorder  
  In  this  zone,  the  following  infor- mation  appears  in  succession 
when the ignition is switched on: 
   -   service indicator,  
  -   engine oil level indicator, 
  -   total mileage recorder.        
A.    Lighting  rheostat  (available  day 
and night) 
  
B.    Trip mileage recorder reset 
  
C.    Personalisation  of  the  instru-
ment  panel  (display  of  desired  
information) 
  
D.    COLOUR (choice of background 
colour  ranging  from  white  to 
blue)   
  Central display 
  Control buttons    
Page 23 of 338

26
I
I N S T R U M E N T S   a n d   C O N T R O L S
             NAVIDRIVE INSTRUMENT PANEL 
 NAVIDRIVE MULTIFUNCTION SCREEN 
 The instrument panel groups all the driving and comfort information at the centre of the dashboard. 
   
1.    Cruise  control  or  speed  limiter 
setting 
  
2.    Speeometer 
  
3.    NaviDrive  multifunction  screen 
(see "NaviDrive instructions") 
  
4.    Rev counter 
  
5.    Electronic  gearbox  or  automatic 
gearbox "Foot on brake" warning  
lamp 
  
6.    Fuel gauge 
  
7.    Electronic  gearbox  or  automatic 
gearbox selector position    
8.    Trip mileage recorder 
  
9.    Total mileage recorder  
  In  this  zone,  the  following  infor- mation  appears  in  succession 
when the ignition is switched on: 
   -   service indicator,  
  -   engine oil level indicator, 
  -   total mileage recorder.        
A.    Personalisation  of  the  instru-
ment  panel  (display  of  desired  
information) 
  
B.    COLOUR (choice of background 
colour  ranging  from  white  to 
blue) 
  
C.    Lighting  rheostat  (available  day 
and night) 
  
D.    Trip mileage recorder reset   
  Central display 
  Control buttons   
Page 30 of 338

31 
I
I N S T R U M E N T S   a n d   C O N T R O L S
        Service indicator  
 System  which  informs  the  driver  
when the next service is due, in ac-
cordance  with  the  manufacturer's 
servicing schedule.  
 The  point  at  which  the  service  is  
due  is  calculated  from  the  last  indi-
cator zero reset. It is determined by 
two parameters:  
   -   the distance travelled, 
  -   the  time  elapsed  since  the  last  service.    5 seconds after the ignition is switched  
on,  
the spanner is switched off  ; the 
distance recorder resumes its normal 
operation.  The  display  then  indicates 
the total and trip distances.   
  Less than 620 miles (1 000 km)  
remain before the next service is 
due  
  
Examples   
:    400  miles  (900  km)  re-
main before the next service is due.  
 For  5  seconds  after  the  ignition  is  
switched on, the display indicates:    Service overdue  
 For  5  seconds    after  the  ignition  is  
switched  on,   
 t h e    s p a n n e r    fl   a s h e s   
to  indicate  that  the  service  must  be 
carried out as soon as possible.  
  
Example:   the service is overdue by 
300 miles/km. 
 For  5  seconds  after  the  ignition  is  
switched on, the display indicates: 
 5  seconds  after  the  ignition  is 
switched  on,  the  distance  recorder 
resumes  its  normal  operation.    The 
spanner remains on   to indicate that 
a service must be carried out soon.    5  seconds  after  the  ignition  is 
switched  on,  the  distance  recorder 
resumes  its  normal  operation.   
The 
spanner remains lit  . 
  More than 620 miles (1 000 km) 
remain before the next service 
is due  
 For  5  seconds  after  the  ignition  is  
switched  on,  the  spanner  symbol-
ising  the  service  operations  comes 
on.  The  distance  recorder  display 
line indicates the distance remaining 
before the next service is due.  
  
Example:    4  800  miles/km  remain 
before the next service is due. 
 For  5  seconds  after  the  ignition  is  
switched on, the display indicates: 
 The  distance  remaining  may  be 
weighted by the time factor, depend-
ing on the driver's driving habits.  
 Therefore,  the  spanner  may  also  
come  on  if  you  have  exceeded  the 
two year service interval.          
Page 31 of 338

32
I
I N S T R U M E N T S   a n d   C O N T R O L S
           Service indicator zero reset              Engine oil level indicator 
 After  each  service,  the  service  indi- 
cator must be reset to zero.  
 The  procedure  for  resetting  to  zero  
is as follows:  
   
     switch off the ignition, 
  
     press  and  hold  the  trip  distance 
recorder zero reset button, 
  
     switch on the ignition; the distance 
recorder  display  begins  a  count- 
down, 
  
     when the display indicates   "=0" , 
release  the  button;  the  spanner 
disappears.    System  which  informs  the  driver 
whether  the  engine  oil  level  is  cor-
rect or not.  
 This  information  is  displayed  for  a  
few  seconds  when  the  ignition  is 
switched  on,  after  the  service  infor-
mation.  
 The level read will only be correct if  
the  vehicle  is  on  level  ground  and 
the  engine  has  been  off  for  more 
than 15 minutes.  
  Oil level correct 
 
  Oil level low  
   T h i s    i s    i n d i c a t e d    b y    t h e    fl   a s h i n g    o f   
 
"OIL"  ,  accompanied  by  an  audible 
signal  and  a  message  on  the  multi-
function screen.  
   I f    t h e    l o w    o i l    l e v e l    i s    c o n fi   r m e d    b y    a   
check using the dipstick, it is essen-
tial that the level is topped up to pre-
vent damage to the engine.     Oil level gauge fault  
   T h i s    i s    i n d i c a t e d    b y    t h e    fl   a s h i n g    o f   
 
"OIL   
    
--"  . Contact a CITROËN dealer.  
  Dipstick  
 Refer  to  the  "Checks"  section  to  lo- 
 c a t e   t h e   d i p s t i c k   a n d   t h e   o i l   fi   l l e r   c a p  
on your engine.   There  are  2  marks  on 
the dipstick:  
   -    A  =  max;  never  ex-
ceed this level, 
  -     B  =  min;  top  up  the 
 l e v e l    v i a    t h e    o i l    fi   l l e r   
cap,  using  the  type 
of  oil  suited  to  your 
engine.    
 Following this operation, if you wish 
to  disconnect  the  battery,  lock  the 
 v e h i c l e   a n d   w a i t   a t   l e a s t   fi   v e   m i n u t e s  
for the zero reset to be taken into ac-
count.         
Page 32 of 338

32
I
I N S T R U M E N T S   a n d   C O N T R O L S
           Service indicator zero reset              Engine oil level indicator 
 After  each  service,  the  service  indi- 
cator must be reset to zero.  
 The  procedure  for  resetting  to  zero  
is as follows:  
   
     switch off the ignition, 
  
     press  and  hold  the  trip  distance 
recorder zero reset button, 
  
     switch on the ignition; the distance 
recorder  display  begins  a  count- 
down, 
  
     when the display indicates   "=0" , 
release  the  button;  the  spanner 
disappears.    System  which  informs  the  driver 
whether  the  engine  oil  level  is  cor-
rect or not.  
 This  information  is  displayed  for  a  
few  seconds  when  the  ignition  is 
switched  on,  after  the  service  infor-
mation.  
 The level read will only be correct if  
the  vehicle  is  on  level  ground  and 
the  engine  has  been  off  for  more 
than 15 minutes.  
  Oil level correct 
 
  Oil level low  
   T h i s    i s    i n d i c a t e d    b y    t h e    fl   a s h i n g    o f   
 
"OIL"  ,  accompanied  by  an  audible 
signal  and  a  message  on  the  multi-
function screen.  
   I f    t h e    l o w    o i l    l e v e l    i s    c o n fi   r m e d    b y    a   
check using the dipstick, it is essen-
tial that the level is topped up to pre-
vent damage to the engine.     Oil level gauge fault  
   T h i s    i s    i n d i c a t e d    b y    t h e    fl   a s h i n g    o f   
 
"OIL   
    
--"  . Contact a CITROËN dealer.  
  Dipstick  
 Refer  to  the  "Checks"  section  to  lo- 
 c a t e   t h e   d i p s t i c k   a n d   t h e   o i l   fi   l l e r   c a p  
on your engine.   There  are  2  marks  on 
the dipstick:  
   -    A  =  max;  never  ex-
ceed this level, 
  -     B  =  min;  top  up  the 
 l e v e l    v i a    t h e    o i l    fi   l l e r   
cap,  using  the  type 
of  oil  suited  to  your 
engine.    
 Following this operation, if you wish 
to  disconnect  the  battery,  lock  the 
 v e h i c l e   a n d   w a i t   a t   l e a s t   fi   v e   m i n u t e s  
for the zero reset to be taken into ac-
count.