ignition Citroen C4 PICASSO 2011.5 1.G Owner's Manual

6
FAMILIARISATION


A.
Central locking

B.
Unlocking

C.
Remote lighting control

D.
Folding/unfolding the key

Press control A
, located on the switch
panel to the right of the dashboard. The
fuel fl ap automatically opens up fully.
Insert the pump nozzle so as to push in
the metal fl ap B
.
Push the fuel fi ller fl ap to close it.

After switching off the ignition, con-
trol A
is only active for a few minutes.
If necessary, switch on the ignition
again to reactivate it.
Bonnet stay: Unclip the stay and insert
it into the notch.



78



Bonnet opening/closing

To release the bonnet, pull the lever
located under the dashboard left hand
end towards you. Then operate the
safety catch at the front of the bonnet,



174



92



Selective opening

Using the multifunction screen, you can
choose from the following options for
opening your vehicle with the remote
control:


- either all of the doors and the tail-
gate,

- or the driver’s door with a fi rst press,
then all of the other doors with a
second press.
To close:
move the stay back to
its initial position, lower the bon-
net, then allow it to slam shut at
the end of its travel.
OPENING

Remote control key
Fuel tank


Capacity: approximately 60 litres.

11
FAMILIARISATION

8.
Controls:


- Trip mileage recorder reset
button

- Lighting rheostat

9.
Warning lamps display (with the
MyWay or NaviDrive multifunction
screen)

10.
Electric parking brake

11 .
Instrument panel

12.
Hazard warning lamps

13.
Switch panels:


- Emergency or assistance

- Lane departure warning system

14.
ESP deactivation button

15.
Steering lock - Ignition switch

16.
Steering mounted controls for
multifunction screen

17.
Horn


1.
Controls:


- Lighting

- Direction indicators

- Front and rear foglamps

2.
Paddles for automatic gearbox or
6-speed electronic gearbox system

3.
Cruise control and speed limiter
(steering mounted controls)

4.
Direction indicator warning lamps

5.
Audio and telematics system
steering mounted controls

6.
Selector for automatic gearbox or
6-speed electronic gearbox system

7.
Controls:


- Windscreen wipe

- Screenwash

- Rear screen wipe

- Trip computer

INSTRUMENTS AND CONTROLS


18.
Optional function controls
(steering mounted controls)

19.
Fusebox access cover

20.
Controls:


- Fuel fi ller fl ap

- Front and rear parking sensors

- Stop & Start

- Volumetric alarm deactivation

- Headlamp adjustment

21.
Bonnet release

22.
Mirror controls

14
FAMILIARISATION

Adjusting the steering wheel

The steering wheel can be adjusted for
height and reach.
Release the steering wheel by pulling
lever A
towards you.
Adjust the position of the steering
wheel then lock it pushing the lever fully
back.



77
It automatically and progressively
changes between day use and night
use. This operates with the ignition switched
on.
From the driver’s seat, select the door
mirror by moving control 1
to the left or
right, then adjust the door mirror as re-
quired in four directions using control 2
.
Demisting-defrosting of the door mirrors
is linked to that of the rear screen.



105



76

For safety reasons, these adjust-
ments must not be carried out whilst
driving.
This additional mirror 1
allows you to
monitor the rear passengers. It can be
tilted to avoid dazzle.

Door mirror foldback

When the vehicle is parked, the door
mirrors can be folded back either man-
ually or automatically.
SITTING COMFORTABLY

Automatic photochromatic rear
view mirror
Door mirror adjustment




77



Child surveillance mirror

15
FAMILIARISATION

Front seats


Head restraint


Backrest angle



Seat height adjustment


Lumbar support



Forwards-backwards adjustment


Armrest

Electric adjustments

Manual adjustments



68



Heated seat control
(lo-
cated on the inside of the
front seats)



67

1.
Adjustment of seat height, angle
and forwards-backwards position

2.
Adjustment of backrest angle and
lumbar support

3.
Driver: storing driving positions
The seats can also be adjusted on a
temporary basis:


- on opening one of the front doors,

- after switching on the ignition.

SITTING COMFORTABLY

25
FAMILIARISATION



166


Electric parking brake
Before leaving the vehicle, check
that the electric parking brake warn-
ing lamp P
(red) is on fi xed (not
fl ashing).
If you leave the vehicle with the en-
gine running, apply the parking brake
manually.
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
Parking space sensor

You can activate this function by press-
ing button A
.
Once the space has been measured, the
system displays the following messages:
< 12 mph (20 km/h)


Parking possible


Parking diffi cult


Parking not advised
This device combines:


- automatic functions: Automatic ap-
plication when the engine stops and
automatic release on use of the ac-
celerator (automatic operation by
default);

- manual use: Manual application/
release of parking brake is possible
by operating control lever A
.


Hill start assist

To aid starting on a gradient, your ve-
hicle is equipped with a system which
keeps it immobilised for about 2 sec-
onds, the approximate time it takes to
move your foot from the brake pedal to
the accelerator pedal.



146

DRIVING




139


Do not drive if the parking brake
warning lamp and the P indicator on
the lever A
are on. When in automatic mode, it remains
possible to apply or release the parking
brake at any time:


)
To apply it, pull on the lever A
.

)
To release it, pull then release
lever A
.

26
FAMILIARISATION

6-speed electronic gearbox system


R
Reverse

N
Neutral

A
Automatic mode

M
Manual mode
Using control paddles 1 "+"
and 2 "-"
:


- gear changing in manual mode,

- temporary manual operation in auto-
matic mode.

P
Park

R
Reverse

N
Neutral

D
Automatic mode

M
Sequential mode
Using control paddles 1 "+"
and 2 "-"
:


- gear changing in sequential mode,

- temporary manual operation in auto-
matic mode.



Starting



)
Check that the selector lever 3
is in
neutral (position N
).

)
Press fi rmly on the brake pedal and
turn the ignition key.



149



Starting



)
Check that the selector lever 3
is in
position P
or N
and turn the ignition
key.
To exit position P
, press on the brake
pedal before moving the selector lever.



156

DRIVING


Automatic gearbox

27
FAMILIARISATION
DRIVING

Stop & Start


Engine going into STOP mode
The "ECO"
warning lamp comes
on in the instrument panel and
the engine goes into stand-by:


- with the 6-speed electronic gear-
box system
; at speeds below
4 mph (6 km/h), press the brake
pedal or put the selector lever into
neutral (position N)
.
In certain circumstances the STOP
mode may not be available; the "ECO"

warning lamp fl ashes for a few sec-
onds, then goes off.



153
The "ECO"
warning lamp goes
off and the engine restarts:


- with the selector lever in position A

or M
, release the brake pedal,

- or with the selector lever in posi-
tion N
and the brake pedal released,
change to position A
or M
,

- or select reverse gear.
In certain circumstances, START mode
may be invoked automatically; the
"ECO"
warning lamp fl ashes for a few
seconds, then goes off.



154

Deactivation/Reactivation
You can deactivate the system at any
time by pressing the "ECO OFF"
but-
ton; the button’s warning lamp comes
on.
The system is reactivated automati-
cally every time you start the engine
with the key.

Before refuelling or doing any-
thing under the bonnet, you
must switch off the ignition
with the key.



154


Going into engine START mode

28
FAMILIARISATION
DRIVING

Ignition switch



●
S: Steering lock

To release the steering lock, operate
the steering slightly while turning the
key, but without forcing.

●
M: Ignition on, running position


●
D: Starter

Release the key as soon as the en-
gine starts. Do not operate the starter
when the engine is running.




81


1.
Cruise control mode On/Off.

2.
Programming a speed/Reducing
the programmed value.

3.
Cruise control On/Off.

4.
Programming a speed/Increasing
the programmed value.
In order to be programmed or activated,
the vehicle speed must be higher than
25 mph (40 km/h), with at least fourth
gear engaged on a manual gearbox
(second gear for the 6-speed electronic
gearbox system or automatic gearbox).

Cruise control




164


1.
Limiter mode On/Off.

2.
Decrease the programmed value.

3.
Speed limiter On/Off.

4.
Increase the programmed value.


Speed limiter




162

I
31
MONITORING
MONOCHROME INSTRUMENT PANEL (WITH MULTIFUNCTION SCREEN A)


1.
Rev counter

2.
Gear effi ciency indicator for a
manual gearbox or gear selector
lever and gear for the electronic
gearbox system or automatic
gearbox
3.
"Foot on brake" warning lamp for
the electronic gearbox system or
automatic gearbox/Electric park-
ing brake

4.
Speedometer

5.
Cruise control or speed limiter
setting

A.
Lighting rheostat (available day
and night)

B.
Trip mileage recorder reset



Central screen
Controls

TWO-TONE INSTRUMENT PANEL (WITH MULTIFUNCTION SCREEN C)


6.
Fuel gauge

7.
Trip mileage recorder

8.
Multifunction screen A/C

9.
Total mileage recorder
In this zone, the following infor-
mation appears in succession
when the ignition is switched on:


- service indicator,

- engine oil level indicator,

- total mileage recorder.

I
32
MONITORING
INSTRUMENT PANEL WITH MyWayOR NaviDriveMULTIFUNCTION
SCREEN


1.
Cruise control or speed limiter
setting

2.
Speedometer

3.
MyWay or NaviDrive multifunc-
tion screen
4.
Rev counter

5.
"Foot on brake” warning lamp for
the electronic gearbox system or
automatic gearbox/Electric park-
ing brake

6.
Fuel gauge

A.
Lighting rheostat (available day
and night)

B.
Trip mileage recorder reset



Central screen
Controls


7.
Gear effi ciency indicator for a
manual gearbox or selector lever
position and gear for the elec-
tronic gearbox system or auto-
matic gearbox

8.
Trip mileage recorder

9.
Total mileage recorder
In this zone, the following infor-
mation appears in succession
when the ignition is switched on:


- service indicator,

- engine oil level indicator,

- total mileage recorder.

10.
Warning lamp zone.