start stop button Citroen C4 PICASSO 2011.5 1.G Owner's Manual

11
FAMILIARISATION

8.
Controls:


- Trip mileage recorder reset
button

- Lighting rheostat

9.
Warning lamps display (with the
MyWay or NaviDrive multifunction
screen)

10.
Electric parking brake

11 .
Instrument panel

12.
Hazard warning lamps

13.
Switch panels:


- Emergency or assistance

- Lane departure warning system

14.
ESP deactivation button

15.
Steering lock - Ignition switch

16.
Steering mounted controls for
multifunction screen

17.
Horn


1.
Controls:


- Lighting

- Direction indicators

- Front and rear foglamps

2.
Paddles for automatic gearbox or
6-speed electronic gearbox system

3.
Cruise control and speed limiter
(steering mounted controls)

4.
Direction indicator warning lamps

5.
Audio and telematics system
steering mounted controls

6.
Selector for automatic gearbox or
6-speed electronic gearbox system

7.
Controls:


- Windscreen wipe

- Screenwash

- Rear screen wipe

- Trip computer

INSTRUMENTS AND CONTROLS


18.
Optional function controls
(steering mounted controls)

19.
Fusebox access cover

20.
Controls:


- Fuel fi ller fl ap

- Front and rear parking sensors

- Stop & Start

- Volumetric alarm deactivation

- Headlamp adjustment

21.
Bonnet release

22.
Mirror controls

18
FAMILIARISATION

Seat belts not fastened/
unfastened warning lamp
This warning lamp informs you
if the driver’s or front passen-
ger’s seat belt is not fastened
(depending on model), and if
the front passenger’s (depend-
ing on model) or the second-row
passengers’ seat belts are unfastened.
The illuminated positions represent
those whose seat belts are not fastened/
unfastened.
Once the function has been activated,
when starting the engine, the system
automatically locks the doors once you
reach approximately 6 mph (10 km/h).
This function can be deactivated by
pressing button A
for more than two
seconds.

Tyre under-inflation detection

This function warns you if a tyre is de-
fl ated or punctured.
This system does not absolve the driver
of the need to regularly check the tyre
pressures.
The service warning lamp comes
on, and a vehicle outline is dis-
played, accompanied by a mes-
sage and an audible signal.
Under-infl ation warning
The STOP
warning lamp comes
on, and a vehicle outline is dis-
played, accompanied by a mes-
sage and an audible signal.
Puncture


41




127




89

MONITORING


Automatic central locking
Instrument panel


with multifunction screen A or C

with the MyWay or NaviDrive
multifunction screen


1.
Instrument panel.

2.
Multifunction screen.

3.
Control buttons.

4.
Warning lamps display zone.



31




32



Manual central locking

You can use electrical central locking or
unlocking by pressing on button A
.
If one of the doors is open or is not
closed properly, central locking will not
work.

25
FAMILIARISATION



166


Electric parking brake
Before leaving the vehicle, check
that the electric parking brake warn-
ing lamp P
(red) is on fi xed (not
fl ashing).
If you leave the vehicle with the en-
gine running, apply the parking brake
manually.
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
Parking space sensor

You can activate this function by press-
ing button A
.
Once the space has been measured, the
system displays the following messages:
< 12 mph (20 km/h)


Parking possible


Parking diffi cult


Parking not advised
This device combines:


- automatic functions: Automatic ap-
plication when the engine stops and
automatic release on use of the ac-
celerator (automatic operation by
default);

- manual use: Manual application/
release of parking brake is possible
by operating control lever A
.


Hill start assist

To aid starting on a gradient, your ve-
hicle is equipped with a system which
keeps it immobilised for about 2 sec-
onds, the approximate time it takes to
move your foot from the brake pedal to
the accelerator pedal.



146

DRIVING




139


Do not drive if the parking brake
warning lamp and the P indicator on
the lever A
are on. When in automatic mode, it remains
possible to apply or release the parking
brake at any time:


)
To apply it, pull on the lever A
.

)
To release it, pull then release
lever A
.

27
FAMILIARISATION
DRIVING

Stop & Start


Engine going into STOP mode
The "ECO"
warning lamp comes
on in the instrument panel and
the engine goes into stand-by:


- with the 6-speed electronic gear-
box system
; at speeds below
4 mph (6 km/h), press the brake
pedal or put the selector lever into
neutral (position N)
.
In certain circumstances the STOP
mode may not be available; the "ECO"

warning lamp fl ashes for a few sec-
onds, then goes off.



153
The "ECO"
warning lamp goes
off and the engine restarts:


- with the selector lever in position A

or M
, release the brake pedal,

- or with the selector lever in posi-
tion N
and the brake pedal released,
change to position A
or M
,

- or select reverse gear.
In certain circumstances, START mode
may be invoked automatically; the
"ECO"
warning lamp fl ashes for a few
seconds, then goes off.



154

Deactivation/Reactivation
You can deactivate the system at any
time by pressing the "ECO OFF"
but-
ton; the button’s warning lamp comes
on.
The system is reactivated automati-
cally every time you start the engine
with the key.

Before refuelling or doing any-
thing under the bonnet, you
must switch off the ignition
with the key.



154


Going into engine START mode

II
54
MULTIFUNCTION SCREENS




TRIP COMPUTER

System which provides current infor-
mation concerning the route travelled
(range, fuel consumption, …) in the
multifunction screen.

Monochrome screen C

MyWay or NaviDrive colour
screen

Display of information

Trip zero reset


)
Press the button, located at the
end of the wiper stalk
, to display
the various trip computer infor-
mation groups in succession:


- the current information
group with:


●
range,

●
current fuel consump-
tion,

●
distance remaining to
be travelled/Stop &
Start time counter,

- the trip "1"
group with:


●
distance travelled,

●
average fuel con-
sumption,

●
average speed,
for the fi rst trip.
- the trip "2"
group with:


●

the distance travelled,


●
the average fuel con-
sumption,

●
the average speed,
for the second trip.





)
When the trip required is dis-
played, press the control for
more than two seconds.
Trips "1"
and "2"
are independent
but their use is identical.
For example, trip "1"
can be used for
daily fi gures and trip "2"
for monthly
fi gures.

III
59
COMFORT

6. Demisting/defrosting the
rear screen
This function operates only if the en-
gine is running.


)
Press button 6
to activate/de-
activate the electric demisting/
defrosting of the rear screen and
door mirrors. The warning lamp
comes on.


7. Rapid demisting/defrosting
of front and rear windows
and door mirrors


)
Press button 7
. The warning
lamp comes on.
This function simultaneously activates:


- front demisting/defrosting,

- optimum fl ow of air,

- intake of exterior air,

- demisting/defrosting of door mir-
rors and heated rear screen,

- air conditioning, if necessary.
To stop the function, press button 7

again.


8. Adjustment of the fan air
temperature
This control is for adjusting the tem-
perature of the air in the passenger
compartment. It can be used in cold
weather as well as in hot weather, pro-
vided the air conditioning is active.
The adjustment of the temperature
is continuous and progressive start-
ing from left to right.


Adjustment of temperature



)
Press button 9
to take control of
the temperature. The warning
lamp comes on.

)
Rotate button 10
to adjust your
temperature.
The adjustment of the temperature
is continuous and progressive start-
ing from left to right. The demisting/defrosting
switches off automatically
to prevent excessive con-
sumption of power.

B. PASSENGER'S CONTROL
PA N E L

III
63
COMFORT

9. Rapid demisting/defrosting
of the front and rear
windows


- Press button 9
. The warning
lamp comes on.
This function gives a rapid
demisting/defrosting of the
vehicle simultaneously with:


- front demisting/defrosting at opti-
mum temperature,

- optimum air fl ow,

- intake of exterior air,

- demisting/defrosting of the door
mirrors and rear screen,

- air conditioning, if necessary.
Press button 9
again or " AUTO"

to stop the function. Demisting/
defrosting of the door mirrors and
rear screen remains activated.


10. Air conditioning



)
Press button 10
to activate the
air conditioning.
The A/C
warning lamp comes on.
B. PASSENGER CONTROL PANELS

11. Front passenger

The front passenger can adjust their
temperature control independently
at any time by pressing buttons +

and -
.
The front passenger con-
trols the adjustment of their
own temperature.
The temperature setting for
the passenger is aligned
with that for the driver.


12. Rear passengers (right/left)

By default, in AUTO

position, the adjust-
ment of the air fl ow is
aligned on the front
ventilation.


)
Rotate the button
to decrease or in-
crease the air fl ow.

You can adjust the air fl ow only if this
is enabled by the driver (see button 6

of the driver’s control panel).







With Stop & Start, when demist-
ing has been activated, the STOP
mode is not available.

IV
83
ACCESS














Lost keys

Visit a CITROËN dealer with the ve-
hicle's registration document, your
personal identifi cation documents
and if possible the key code label.
The CITROËN dealer will be able to
fi nd the key code and the transponder
code required to order a new key.


Remote control

The high frequency remote control is
a sensitive system; do not operate it
while it is in your pocket as there is a
possibility that it may unlock the ve-
hicle, without you being aware of it.
Do not repeatedly press the buttons
of your remote control out of range
and out of sight of your vehicle. You
run the risk of stopping it from work-
ing and the remote control would
have to be reinitialised.
The remote control does not operate
when the key is in the ignition switch,
even when the ignition is switched
off, except for reinitialisation.


Locking the vehicle

Driving with the doors locked may
make access to the passenger com-
partment by the emergency services
more diffi cult in an emergency.
As a safety precaution (with children
on board), remove the key from the
ignition switch when you leave the
vehicle, even for a short time.


Anti-theft protection

Do not make any modifi cations to
the electronic engine immobiliser
system; this could cause malfunc-
tions.


When purchasing a second-
hand vehicle
Have the pairing of all of the keys
in your possession checked by a
CITROËN dealer, to ensure that
only your keys can be used to open
and start the vehicle.







Do not throw the remote
control batteries away, they
contain metals which are
harmful to the environment.
Take them to an approved collection
point.

IX
172
DRIVING

Loading/unloading
assistance

Grand
C4 Picasso

C4 Picasso

The pneumatic suspension has an
additional function: the possibility to
raise or lower the height of the rear
of the vehicle when stationary, in or-
der to facilitate loading/unloading of
the boot.
Increasing the height of the boot
fl oor


)
Press continuously the top con-
trol A
, which is located in the
boot, on the left-hand side.
This action will be accompanied by
an audible signal. You can stop the
movement at any time by releasing
the control.
3 beeps will confi rm that the move-
ment has gone as far as it can.

Returning to the normal height



)
Press briefl y the bottom of con-
trol A
twice.


Decreasing the height of the boot
fl oor


)
Press continuously the bottom of
control A
.
This action will be accompanied by
an audible signal. You can stop the
movement at any time by releasing
the control.
3 beeps will confi rm that the move-
ment has gone as far as it can.
Returning to the normal height



)
Press briefl y the top of control A

twice.
Driving with the boot in a
low position may damage
underbody components.

Particular points



- If you start the vehicle without
having returned it to the normal
height, automatic correction will
activate as soon as the vehicle
starts to move. During the cor-
rection, the service warning
lamp comes on and a message
on the screen reminds you not to
exceed 6 mph (10 km/h).

- Loading assistance does not
function in the following circum-
stances:


- If button B
is illuminated,

- in power economy mode,

- when you fi
rst use the function,
press control A
for two seconds
to initialise the system. The sys-
tem will respond normally to sub-
sequent operation of the control.

234
02
1
2

VOICE COMMANDS
VOICE COMMANDS AND STEERING MOUNTED CONTROLS


DISPLAYING THE LIST AND USING THEM
To display the list o
f available voice commands, press the voice recognition control to start the voice recognition,
then say HELP or the voice recognition command.
For the same operation, press and
hold the MENU button and select the"Voice commands list" function.
Press the voice recognition control tostart the voice recognition.
Say the words one by one and wait for the audible confi rmation signal between each word.
Th
e list which follows is exhaustive.

LEVEL 1LEVEL 2LEVEL 3
radiomemoryautostoreprevious/next
list 1 to
6/*
cd pla
yer
Jukebox (if activated)
USB previous/next track
track number/track scan
random play
directory (CD-MP3 inserted)
list 1 t
o 250/*
previous/next
repeat
help/what can I say/cancel
call/guide to "Pre-recorded descri
ption"
telephone l
ast number
voice box
voice mail
directory "Pre-recorded description"
messagedisplay
read
directory
"Pre-recorded description"
navigation stop/resume
zoom in/out
view *
destination
vehicle

traffi c info display
read

displayaudio
telephone
tr
ip computer
Navigation
a
ir conditioning

previous/next
stop

delete yes/nof
or all level 1 and 2

* help/what can I say/cancelfor all level 1, 2 or *
Voice commands list