tailgate Citroen C4 PICASSO 2011.5 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2011.5, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2011.5 1.GPages: 352, PDF Size: 9.83 MB
Page 9 of 352
7
FAMILIARISATION
This opening gives easy access to the
boot, even if you are parked close to a
wall or to another vehicle.
Opening rear screen
Opening
)
Press control 2. The grip 4
is in line
with the rear wiper.
Closing
)
Lower the rear screen.
90
)
Press control 1
.
You cannot open the tailgate if the rear
screen is already open.
)
Lower the tailgate, using one of the
grips 3
, located on the interior tail-
gate trim.
)
Past the balancing point, allow the
tailgate to close itself (do not assist
it or slow it down).
Load: 22 kg maximum.
The Modubox comprises a shopping
trolley and a fl exible bag which can be
used independently of each other de-
pending on your needs.
112
OPENING
Opening the tailgate
Closing the tailgate
Modubox
(CITROËN C4 Picasso)
Page 81 of 352
IV
79
ACCESS
Normal locking using the key
)
Turn the key to the right in the
driver's door lock to lock the ve-
hicle. To allow long objects to be carried,
the vehicle can be locked from the
inside, using the central locking
control on the dashboard, even if
the tailgate or rear screen is open.
When the vehicle is locked, if it is
unlocked inadvertently, it will lock
itself again automatically after thirty
seconds unless a door is opened.
When closing the windows and/or
panoramic sunroof blind using the
remote control, you must ensure
that no one prevents them from
closing correctly.
The folding and unfolding of the
door mirrors using the remote
control can be deactivated by a
CITROËN dealer or a qualifi ed
workshop.
Deadlocking using the remote
control
)
Press the closed pad-
lock to lock the vehicle
completely or press the
closed padlock for more
than two seconds to
close the windows and
the panoramic sunroof
blind automatically in
addition to locking.
)
Press the closed padlock again
within fi ve seconds to deadlock
the vehicle.
Locking the vehicle
Normal locking using the remote
control
)
Briefl y press the closed
padlock to lock the ve-
hicle.
)
Make a long press on the closed
padlock to lock the vehicle and
also close the windows and the
panoramic sunroof blind.
Locking is confi rmed by fi xed light-
ing of the direction indicators for ap-
proximately two seconds.
According to version, the door mirrors
fold at the same time.
Locking also triggers the timed
switching on of the exterior side
spotlamps and the guide-me-home
lighting, if this is activated.
If one of the doors, the rear screen
or the boot is still open, the central
locking does not take place.
Page 92 of 352
IV
90
ACCESS
BOOT
)
After unlocking the vehicle com-
pletely using the remote control
or the key, with the rear screen
closed, pull on the lever 1
and
raise the tailgate.
)
Lower the tailgate using one of
the two handholds 3
, located on
the interior trim.
- when the engine is
running
, this warning
lamp comes on, accom-
panied by a message in
the multifunction screen
for a few seconds,
- when the vehicle is moving
(speed above 6 mph (10 km/h)),
this warning lamp comes on, ac-
companied by an audible signal
and a message in the multifunc-
tion screen for a few seconds.
If the tailgate is not closed correctly:
REAR SCREEN
This opening gives easy access
to the boot, even if you are parked
close to a wall or another vehicle.
Closing
)
Lower the rear screen guiding
it with the wiper arm until it is
closed.
If the rear screen is not closed cor-
rectly:
- when the engine is
running
, this warning
lamp comes on, accom-
panied by a message in
the multifunction screen
for a few seconds,
- when the vehicle is moving
(speed above 6 mph (10 km/h)),
this warning lamp comes on, ac-
companied by an audible signal
and a message in the multifunc-
tion screen for a few seconds.
The boot and the rear screen
cannot both be open at the same
time. When the rear screen is open,
you can access the boot by rais-
ing the rear shelf using its tab
(C4 Picasso).
)
After unlocking the vehicle com-
pletely using the remote control
or the key, with the boot closed,
press the control 2
and raise the
rear screen using the base 4
of
the wiper arm.
)
Past the balancing point, allow the
tailgate to lower and close itself
(do not assist it or slow it down).
Opening
Opening
Closing
Page 93 of 352
IV
91
ACCESS
Emergency boot release
System for mechanical unlocking of
the boot in the event of a battery or
central locking malfunction.
Unlocking
)
Fold back the rear seats to gain
access to the lock from inside
the boot.
)
Insert a small screwdriver into
hole A
of the lock to unlock the
tailgate.
)
Push the white part, located in-
side the lock, to the left to unlock
the boot.
PANORAMIC SUNROOF
It is fi tted with an electrically con-
trolled blind.
Opening the roof blind
)
Rotate the control knob B
to
slide the roof blind to the desired
position (positions 1
to 9
).
Closing the roof blind
)
Rotate the control knob B
to po-
sition 0
to close the roof blind.
Recommendations
- Pressing the locking button on
the remote control for more than
two seconds will close the blind
(practical when, for example,
you leave your vehicle in a sunlit
car park).
- On returning to your vehicle, a
press on control knob B
reposi-
tions the blind to the last position
selected.
Anti-pinch
The blind has an anti-pinch function.
At the end of its travel, when the blind
encounters an obstacle on closing, it
stops and moves back slightly.
Following a fault or after a battery
disconnection during the movement
of the blind or after it has stopped,
you must re-initialise the anti-pinch
function:
)
place the blind in the closed po-
sition,
)
press control knob B
for approxi-
mately two seconds.
Page 102 of 352
V
100
VISIBILITY
WIPER CONTROLS
System for selection and control of
the various front and rear wiping
modes for the elimination of rain and
cleaning.
The vehicle's front and rear wipers
are designed to improve the driver's
visibility progressively according to
the climatic conditions.
Programming
Various automatic wiper control
modes are also available according
to the following options:
- automatic rain sensitive wind-
screen wipers,
- rear wiping on engaging reverse
gear.
Manual controls
The wiper commands are issued di-
rectly by the driver by means of the
stalk A
and the ring B
.
Rear wiper
B.
Rear wiper selection ring:
park,
intermittent wipe,
wash-wipe (set duration). fast (heavy rain),
normal (moderate rain),
intermittent (proportional to
the speed of the vehicle),
automatic, then sin-
gle wipe (see follow-
ing page).
park,
single wipe (press down and
release),
Windscreen wipers
A.
Wiping speed selection stalk:
or
If a signifi cant accumulation of snow or ice is present, or when using a
tailgate bicycle carrier, deactivate
the automatic rear wiper via the
multifunction screen confi guration
menu.
Page 113 of 352
VI
111
FITTINGS
LUGGAGE COVER(C4 PICASSO)
This is in two parts.
Rear parcel shelf
Removal
)
Unhook the cords.
)
Push upwards, then lift on each
side of the luggage cover.
Front parcel shelf
Removal
)
First remove the rear shelf.
)
Push upwards, then lift on each
side.
Fitting
)
Offer up the shelf to its housings
and push fi rmly down until it en-
gages.
)
For the shelf to rise with the tail-
gate, take the cords and attach
them on the tailgate.
Refi tting
)
Direct the fl ap downwards.
)
Offer up the shelf to its housings
and push fi rmly down until it en-
gages.
Page 196 of 352
XI
194
PRACTICAL INFORMATION
Rear lamps (C4 Picasso)
1.
Direction indicators
(PY21W)
2.
Brake lamps/sidelamps
(P21/5W)
3.
Reversing lamp
(P21W
)
)
Identify the faulty bulb.
)
With the boot open, press on the
plastic cover A
, located close to
the lamp unit, to release it from
its housing.
)
Undo the two screws B
on the
side of the lamp unit and detach
the lamp unit by pulling it rear-
wards.
)
Disconnect the connector linking
the lamp unit with the tailgate.
)
Remove the bulb-holder.
)
Replace the bulbs.
To remove a bulb, rotate it a
quarter turn.
To r efi t the bulb, rotate it a quar-
ter turn in the other direction.
)
Reposition the bulb-holder.
)
Reconnect the connector to the
lamp unit.
Lamps mounted on the
bodywork
)
Identify the faulty bulb.
)
With the boot open, remove the
plastic cover on the tailgate.
)
Remove the bulb-holder from its
housing.
)
Replace the bulb.
To remove a bulb, rotate it a
quarter turn.
To r efi t the bulb, rotate it a quarter
turn in the other direction.
)
Reposition the bulb-holder.
)
Refi t the plastic cover.
Lamps mounted on the tailgate
)
Refi t the lamp unit on the body
and do up the two screws.
)
Reposition the plastic cover by
pressing on it.
Page 197 of 352
XI
195
PRACTICAL INFORMATION
Rear lamps (Grand C4 Picasso)
1.
Direction indicators
(PY21W)
2.
Brake lamps
(P21W)
3.
Reversing lamp
(P21W)
4.
Sidelamps (LEDs)
For this type of lamp, contact a
CITROËN dealer or qualifi ed
workshop.
Changing bulbs
)
Identify the faulty bulb.
)
With the tailgate open, undo the
3 screws located on the side of
the lamp unit and pull it rear-
wards to detach.
)
Disconnect the connector linking
the lamp unit to the boot. Do not
disconnect the LEDs.
)
Remove the seal.
)
Remove the bulb-holder.
)
Replace the bulbs.
To remove a bulb, rotate it a
quarter turn.
To fi t the bulb, rotate it a quarter
turn in the other direction.
)
Reposition the bulb-holder.
)
Refi t the seal.
)
Reconnect the connector to the
lamp unit.
)
Arrange the harness in the open-
ing provided in the body.
)
Refi t the lamp unit to the body
and fi t and tighten the 3 screws.
Number plate lamps
(W 5 W)
)
Insert a thin screwdriver into one
of the external holes of the lens.
)
Push it outwards to unclip it.
)
Remove the lens.
)
Change the faulty bulb.
Page 198 of 352
XI
196
PRACTICAL INFORMATION
Third brake lamp with bulb
(W5W)
)
With the boot open, detach the
interior trim.
)
Undo the nuts.
)
Using a thin screwdriver, detach
the 3 retaining lugs.
)
Remove the lamp via the exterior
of the tailgate.
)
Remove the bulb-holder.
)
Change the faulty bulb(s).
To r efi t, carry out these operations in
reverse order.
Third brake lamp (LEDs)
For the replacement of this type
of LED lamp, contact a CITROËN
dealer or a qualifi ed workshop.
Interior lighting
Interior lamp (1/W5W)
Detach the cover of the interior
lamp 1
with a thin screwdriver, close
to the button, to access the faulty
bulb.
Map reading lamps (2/W5W)
Detach the cover of the interior lamp.
To access the faulty bulb, detach
the partition for the reading lamp 2
concerned, as necessary.
Boot lamps (W5W)
Detach the unit by pushing it rear-
wards.
Torch (Krypton 3.6 V)
)
Open the tab.
)
Push with a fl at screwdriver in
the hole under the tab and re-
cover the bulb unit.
)
Open the bulb unit fully to change
the bulb.
Page 212 of 352
XI
210
PRACTICAL INFORMATION
ROOF BARS
For your safety and to avoid damage
to the roof and tailgate, the design of
your vehicle requires the use of roof
bars and roof boxes that are tested
and approved by CITROËN.
Regardless of the type of load car-
rier to be mounted on the roof (roof
box, bicycle carrier, ski carrier...),
you must fi t transverse roof bars.
Recommendations
)
Distribute the load evenly, avoid-
ing overloading on one side.
)
Arrange the heaviest part of the
load as close as possible to the
roof.
)
Anchor the load securely and fi t
a warning fl ag part of it is over-
hanging.
)
Drive gently, as the vehicle will
be more liable to the effects of
side winds (vehicle stability may
be altered).
)
Remove the roof bars as soon
as they are no longer needed.
Bicycle carrier
Do not attach a strap-fi tting bicycle car-
rier to the following vehicle versions:
- C4 Picasso 5-seater (all versions);
- C4 Picasso 7-seater version with
opening rear screen.
Maximum load, distributed
over the roof bars (for a loading
height not exceeding 40 cm,
except bicycle carrier): 80 kg.
If the height exceeds 40 cm, adapt
your speed to the profi le of the road
to avoid damaging the roof bars
and the fi xings on the roof.
Please refer to national legislation
in order to comply with the regula-
tions concerning the transport of
objects which are longer than the
vehicle.
* According to country.
VERY COLD CLIMATE SCREEN *
Removable protective screen which
prevents the accumulation of snow
at the radiator cooling fan.
Fitting
)
Offer up the very cold climate
screen to the front of the lower
section of the front bumper.
)
Press around its edge to engage
its fi xing clips one by one.
Removal
)
Use a screwdriver as a lever to
release each fi xing clip in turn.
Do not forget to remove the very
cold climate screen:
- when the ambient temperature
exceeds 10 °C,
- when towing,
-
at speeds above 75 mph (120 km/h).