Downloaded from www.Manualslib.com manuals search engine XI
197
PRACTICAL INFORMATION
CHANGING A FUSE
Before replacing a fuse:
- the cause of the failure must be
identifi ed and corrected,
- all electrical consumers must be
switched off,
- your vehicle must be stationary,
ignition off.
Identify the failed fuse by reference
to the tables and diagrams below.
Access to tools
The extraction tweezer A
is fi tted on
the back of the dashboard fusebox
cover.
For access to it:
)
unclip the cover by pulling at the
top right, then left,
)
pull the cover down,
)
remove the tweezer.
Changing a fuse
)
Use the special tweezer A
to ex-
tract the fuse from its housing
and check the condition of its el-
ement.
)
Replace the failed fuse with a
fuse of the same rating
(same
colour)
Use of a fuse of different rating
may cause a malfunction (risk of
fi re).
If the failure occurs again soon after
replacing the fuse, have the electri-
cal system checked by a CITROËN
dealer or a qualifi ed workshop.
Good
Failed
Tweezer A
Fuses under the dashboard
Your vehicle's electrical
system is designed to oper-
ate with either standard or
optional equipment.
Before installing electrical equip-
ment or accessories on your vehi-
cle, consult a CITROËN dealer or a
qualifi ed workshop.
CITROËN declines all responsibil-
ity for the consequences and costs
that are caused by faults or repairs
on your vehicle resulting from the
installation of accessories that
are not supplied and/or not rec-
ommended by CITROËN and not
installed according to its instruc-
tions, particularly when the energy
consumption of all of the additional
accessories connected exceeds
10 milliamperes (Ma).
