fuel consumption Citroen C4 PICASSO 2016 2.G Owner's Manual

9
C4-Picasso-II_en_Chap00c_eco-conduite_ed01-2016
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   gearbox,   give   preference   to   automatic   mode   and  
a

void   pressing   the   accelerator   pedal   heavily   or   suddenly.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate   it   by   opening   the   windows   and   air   vents   before   using   the   air  
c

onditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents  
ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the   temperature
 i

n   the   passenger   compartment   down   (sunroof   and   window   blinds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as  
s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   ambient   light  
l

evel   does   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  
c

onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect
  your   portable   devices   before   leaving   the   vehicle.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices contribute towards a reduction in fuel consumption and CO
2
emissions
 
and
 
also
 
helps
 
reduce
 
the
 
background
 
traffic
 
noise.
If
 
your
 
vehicle
 
has
 
cruise
 
control,
 
make
 
use
 
of
 
the
 
system
 
at
 
speeds
 
a

bove
 
25
 
mph
 
(40
 
km/h)
 
when
 
the
 
traffic
 
is
 
flowing
 
well.
The
 
gear
 
shift
 
indicator
 
invites
 
you
 
engage
 
the
 
most
 
suitable
 
gear:
 
as
 
s

oon as the indication is displayed in the instrument panel, follow it
straight
 
away.
For
 
vehicles
 
fitted
 
with
 
an
 
automatic
 
gearbox,
 
this
 
indicator
 
appears
 
o

nly
 
in
 
manual
 
mode.
.
Eco-driving

10
C4-Picasso-II_en_Chap00c_eco-conduite_ed01-2016
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the bottom   of   the   boot,   as   close   as   possible   to   the   rear   seats.
Limit the loads carried in the vehicle and reduce wind resistance (roof
bars,
  roof   rack,   bicycle   carrier,   trailer...).   Use   a   roof   box   in   preference.
Remove
  roof   bars   and   roof   racks   after   use.
At
  the   end   of   winter,   remove   snow   tyres   and   refit   your   summer   tyres.
Observe the recommendations
on maintenance
Check the tyre pressures regularly, when cold, referring to the label in the   door   aperture,   driver's   side.
Carry
  out   this   check   in   particular:
-
 
b
efore   a   long   journey,
-
 
a
t   each   change   of   season,
-
 
a
fter   a   long   period   out   of   use.
Don't
  forget   the   spare   wheel   and   the   tyres   on   any   trailer   or   caravan.
Have
  your   vehicle   serviced   regularly   (engine   oil,   oil   filter,   air   filter,  
p

assenger   compartment   filter...)   and   observe   the   schedule   of  
o

perations   recommended   in   the   manufacturer's   service   schedule.
With
  a   BlueHDi   Diesel   engine,   if   the   SCR   system   is   faulty   your   vehicle  
b

ecomes   polluting;   go   to   a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout   delay   to   have   the   emissions   of   nitrous   oxides   brought   back   to  
t

he   legal   level.
When
  refuelling,   do   not   continue   after   the   third   cut-off   of   the   nozzle   to  
a

void   any   over flow.
At the wheel of your new vehicle, it is only after the first 1 800 miles
(3 000
  kilometres)   that   you   will   see   the   fuel   consumption   settle   down   to  
a

  consistent   average.
Eco-driving

16
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
ButtonCorresponding function Comments
Screen configuration Adjustment
  of   the   display   settings   (scrolling   of   text,   animations...)   and   brightness.
Ambience Select
  a   colour   scheme   for   the   type   2   instrument   panel.
Instrument panel perso Select
  the   type   of   information   displayed   in   the   type   2   instrument   panel.
System configuration Choice
  of   units:
-
t

emperature (°Celsius or °Fahrenheit)
-
 
d
istance   and   fuel   consumption   (l/100   km,   mpg   or   km/l).
Languages Choice
  of   language   used   for   the   touch   screen   tablet   and   the   type   2   instrument   panel.
Time/Date Setting
  the   date   and   time.
Instruments

48
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Tr i p c o m p u t e r
Type 1 instrument panel
System that gives you information on the journey in progress (range, fuel consumption…).
Information display in the touch screen tablet
Permanent display:
F Sel ect the " Trip computer " in the
Applications
 

menu.
The trip computer information is displayed in
tabs.
F

P
ress one of the buttons to display the
desired
 t

ab. The
  current   fuel   consumption   tab   with:
-  
t
he   range,
-
t
he current fuel consumption,
-  
t
he   Stop   &   Start   time   counter.
The trip "1"
 
tab   with:
-
t
he distance travelled,
-  
t
he   average   fuel   consumption,
-  
t
he   average   speed,  
 
f
or   the   first   trip.
The trip "2"  tab   with:
-

t
he distance travelled,
-
 
t
he   average   fuel   consumption,
-
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When the desired trip is displayed, press the reset button or on the end of the wiper
control
  stalk.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
The information is accessible in the Driving
 

menu.
Temporary
 
display
 
in
 
a
 
new
 
window:
F
 
P

ress
 
the
 
end
 
of
 
the
 
wiper
 
control
 
stalk
 
for
 
a

ccess to the information and display the
different
 
tabs.
Instruments

49
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Tr i p c o m p u t e r
Type 2 instrument panel
Information display in the instrument panel
F Press the button on the end of the wiper control stalk to display the various tabs in
succession. -
 
T
he   current   information   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
- Trip
"1"
 w
ith:
●  
t
he   average   speed,
●  
t
he   average   fuel   consumption,
●  t he   distance   travelled, f
or   the   first   trip.
-
Trip "2"
 w

ith:
●
 
t
he   average   speed,
●
 
t
he   average   fuel   consumption,
●
 
t
he   distance   travelled,
 f

or   the   second   trip.
Trip reset
F When the trip required is displayed, press the control for more than two seconds
or use the left hand thumbwheel of the
steering
  mounted   controls.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
For
 
all
 
other
 
display
 
modes,
 
pressing
 
the
 
end
 
o

f
 
the
 
wiper
 
stalk
 
displays
 
this
 
information
 
in
 
a
 
n

ew
 
window.
The display of trip computer information is
permanent when you select the "Dials" or
"Personal"
 
display
 
mode.
1
Instruments

50
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Tr i p c o m p u t e r
Range
(miles or km)
T he distance which can still be
travelled
  with   the   fuel   remaining   in  
t

he   tank   (related   to   the   average   fuel  
c

onsumption over the last few miles
(kilometres)
 t

ravelled).
This
  value   may   vary   following   a   change  
i

n
 
the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
 
the
  range   falls   below   20   miles   (30   km),  
d

ashes
 
are   displayed.   After   filling   with   at   least  
5

 
litres
 
of
 
fuel,   the   range   is   recalculated   and   is  
d

isplayed
  when   it   exceeds   60   miles   (100   km).
If dashes are displayed continuously
while
  driving   in   place   of   the   digits,  
c

ontact a CITROËN dealer or a
qualified
 w

orkshop. This function is only displayed from
20 mph
  (30   km/h).
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip   reset.
Average speed
(mph or km/h)
C alculated   since   the   last   trip   reset.
Distance travelled
(miles or km)
C alculated   since   the   last   trip   reset.
Stop & Start time counter
(minutes / seconds or hours / minutes)
I
f your vehicle is fitted with Stop & Start, a time
counter calculates the time spent in STOP
mode
 
during   a   journey.
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
A few definitions
Instruments

102
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Front demist -
defrost
F Press this button to demist or defrost the windscreen and side
windows
  as   quickly   as   possible.  
T

he indicator lamp in the button
comes
  on.
With
  Stop   &   Start,   when   demisting   has  
b

een activated, the STOP mode is not
available.
The
 
system   automatically   manages   the   air  
c

onditioning   (depending   on   version),   air  
f

low
 
and
 
air   intake,   and   provides   optimum  
d

istribution towards the windscreen and side
windows.
F
 
T

o
 
switch   it   off   press   this   button   again   or  
a

djust   the   setting   for   air   flow   or   distribution.  
T

he
 
indicator   lamp   goes   off.
Rear screen demist -
defrost
Switching on
Switching off
F Press  this   button   to   demist /
defrost the rear screen and
(depending
  on   version)   the   door  
m

irrors.
The demisting/defrosting switches off automatically to   prevent   an   excessive   consumption   of   current.
The rear screen demist - defrost
can  only   operate   when   the   engine   is  
r

unning.
Switch
  off   the   heating   of   the   rear   screen  
a

nd   door   mirrors   as   soon   as   you   judge   it  
p

ossible,   as   reducing   the   consumption  
o

f electrical current reduces fuel
consumption.
F

I

t is possible to stop the
demisting/defrosting
 o

peration
 b

efore it is switched off
automatically
 
by
 
pressing
 
the
 
bu

tton
 ag

ain.
The indicator lamp associated with the button
goes
 
off.
The indicator lamp associated with the button comes on.
Ease of use and comfort

143
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Invalid value in manual operationThis   symbol   is   displayed   if   a   gear   is  
n

ot   engaged   correctly   (gear   selector  
b

etween   two   positions).
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 c

hanges
 
using
 
the
 
 "
+" and " -"
 
steering
 
mounted
 c

ontrol
 
paddles.
 
If
 
the
 
engine
 
speed
 
allows,
 
the
 i

nstruction
 
to
 
change
 
gear
 
is
 
acted
 
on.
This function allows you to anticipate certain
situations
 
s

uch
 
a

s
 
ov

ertaking
 
a

nother
 
v

ehicle
 
o

r
 a
pproaching
 
a
 
bend.
After a few moments with no action on the
control
 
paddles,
 
the
 
gearbox
 
manages
 
the
 
g

ears
 
automatically
 
again.
Temporary manual control of the
gears
Manual mode
D and the gear engaged are displayed in the in strument pan el.
The
  gearbox   operates   in   auto-active  
m

ode,   without   any   action   from   the   driver.   It  
c

ontinuously   selects   the   most   appropriate   gear  
a

ccording   to   the   following   conditions:
-
o

ptimisation of fuel consumption,
-
 
d
riving   style,
-

r
elief of the road,
-
 
v
ehicle   load.
Automated mode
F Select position D .
For
 
maximum   acceleration,   without   touching  
t

he
 
gear
 
selector,   press   the   accelerator   fully  
d

own
 
(kick   down).   The   gearbox   changes   down  
a

utomatically   and   maintains   the   gear   selected  
u

ntil
 
the
 
maximum   engine   speed   is   reached.
When
 
braking,   the   gearbox   changes   down  
a

utomatically   for   more   effective   engine   braking.
When
 
you   take   your   foot   off   the   accelerator  
p

edal
 
suddenly,   the   gearbox   does   not   change  
u

p,
 
so
 
as
 
to   improve   safety. F
Sel ect position M.
F

U
se the "+" and " -"
  steering   mounted  
c

ontrol   paddles   to   change   gear.
The
  gears   engaged   are   displayed   successively  
i

n   the   instrument   panel.
When stationary or at very low speed, the
gearbox
  automatically   engages   1st
 g
e a r.
In manual mode, it is not necessary to release
the
  accelerator   pedal   when   changing   gear.
The
  change   from   one   gear   to   another   is   only  
e

ffected if the conditions of vehicle speed and
engine
  speed   allow;   other wise   the   automatic  
l

aws   of   operation   are   imposed   temporarily.
If
  the   engine   speed   is   too   high   or   too   low,  
t

he   display   of   the   gear   selected   flashes   for   a  
f

ew   seconds,   then   the   new   gear   engaged   is  
d

isplayed.It
  is   possible   to   change   mode   at   any  
t

ime,   by   moving   the   gear   selector  
f

rom D to M   or   the   other   way   round.
4
Driving

145
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Depending on the driving situation and your vehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   or   more   gears.
You
  can   follow   this   instruction   without   going  
t

hrough   the   intermediate   gears..
Gear shift indicator
System which reduces fuel consumption by recommending the most suitable gear. T he   system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (gradient,   load, ...)  
a

nd the demands of the driver (power,
acceleration,
  braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear.
The information appears in the instrument
panel
  in   the   form   of   an   arrow.
On
  vehicles   with   manual   gearbox,   the   arrow  
m

ay be accompanied by the recommended
g e a r.
The gear engagement recommendations
must not be considered compulsory.
This is because the configuration of the
road, traffic density and safety remain
impor tant factors in the choice of the best
g e a r.
The
  gear   shift   indicator   system   does   not  
r

eplace   the   need   for   vigilance   on   the   part   of   the  
d

river.
With
  an   automatic   gearbox,   the   system   is   only   active   in   manual   mode.
On
  BlueHDi   Diesel   135   and   150   versions   with  
m

anual   gearbox,   in   certain   driving   conditions  
t

he   system   may   suggest   changing   into   neutral  
s

o   that   the   engine   can   go   into   standby   (STOP  
m

ode   with   Stop   &   Start).   In   this   case,   N is
displayed
  in   the   instrument   panel.Example:
This
  function   cannot   be   deactivated.
-
 
Y
ou   are   in   third   gear.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
4
Driving

146
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument
panel  and   the   engine   goes   into   standby  
au

tomatically:
-

w
ith a manual gearbox , at speeds below
12
  mph   (20   km/h),   or   vehicle   stationary  
(

with   PureTech   130,   THP   165   and  
B

lueHDi 100, 115 and 120 versions), when
you
  place   the   gear   lever   in   neutral,   and   you  
r

elease the clutch pedal,
-

w
ith an automatic gearbox , with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres, STOP mode is not
available for a few seconds after
coming
  out   of   reverse   gear.
The Stop & Start system does not affect
the functionality of the vehicle, such as
for
  example,   braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(10
  km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   selected,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, this indicator lamp flashes
for  a   few   seconds   then   goes   off.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If your vehicle is fitted with the system, a time
counter calculates the sum of the periods in
STOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 t
he
 
START/STOP
 
button.
Driving