CD player Citroen C4 PICASSO DAG 2010.5 1.G Owner's Guide

328
1
2
3
4
1
2
BASIC FUNCTIONS
VIDEO PACK ON/OFF
Press the POWER/EJECT button on the DVD/CD player or on the remote control.
To switch on the system, switch on the vehicle's ignition.
When the ignition is off, the video pack will switch off automatically after approximately ten minutes to avoid discharging the batte ry.
Play begins automatically.
To load a disc, insert it carefully, printed face uppermost, until it is fully inserted.
Remove the disc carefully.
Press the POWER/EJECT button on the DVD/CD player or remote control.
LOADING/EJECTING A DVD/CD

330
FREQUENTLY ASKED QUESTIONS
The table below groups together the answers to the most frequently asked questions concerning the video pack.
QUESTIONSOLUTION
The player does not start. - Check the vehicle's fuses.
The player does not react to pressing of the remote control buttons. - The remote control batteries are fl at. Replace them.
- The remote control sensor is hampered by objects or is dirty. R emove all objects on the remote control receiver or clean the surface using a damp cloth.
- The video pack has overheated. Let it cool for a few minutes.
Image or sound interference while playing a DVD. The image remains frozen during play.
The player cannot read the disc. The disc may be damaged or di rty.
The player does not play the disc inserted. - The format of the disc does not correspond to the specifi cations of the player.
- If it is cold, condensation may have formed on the laser. Wait approximately 5 minutes to allowthe humidity to evaporate.
When a DVD/VCD/SVCD is played,the image is of poor quality. - Remove the disc.
- Using the SETUP button, adjust the brightness and insert the disc again.
No image is displayed on the monitor. - Press the SOURCE button until the image appears.
- Press the SCREEN ON/OFF button.
There is no sound in the audio headphones. - Increase the volume using the VOLUME +/- buttons on the remo te control or using the dial onthe headphones.
- Check that the correct channel is selected on the headphones.
- Press the SOURCE button until the sound arrives.
- Replace the headphone batteries.
The start-up screen does not appear following ejection of the disc. - Insert another disc.
- Switch the system off and then on again.