warning Citroen C4 PICASSO RHD 2012 1.G Owner's Guide

II
50
MULTIFUNCTION SCREENS
MyWay MULTIFUNCTION
SCREEN
This screen can display the following
information:


- time,

- date,

- ambient temperature
When the ambient temperature
is between +3 °C and -3 °C,
the display fl ashes (risk of ice).
The temperature displayed may
be higher that the actual tem-
perature if the vehicle has been
parked in the sun.

- warning and vehicle function status
messages, displayed temporarily,

- audio functions,

- trip computer (see the end of the
section),

- result of the parking space mea-
surement,

- visual parking sensor information,

- satellite navigation system infor-
mation.


Controls !

Displays in the screen

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary. You can press:


A.
Opens a contextual menu.

B.
Navigation through the screen
menus.

C.

Confi rmation of the selection made
in a menu or a modifi ed value.

D.
Abandon the current operation.

E.
Selection of main display (date,
radio-CD/audio, telephone, map,
navigation and trip computer).

B
or F.
In the menus, navigation, se-
lect activation/deactivation of
functions and select settings. To select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"SETUP"
or "PHONE"
button to
open the corresponding menu,
For more information on these ap-
plications, refer to the "Audio and
Telematics" section.


Menus in the control panel

III
58
COMFORT
MANUAL AIR CONDITIONING
The air conditioning system operates
with the engine running.
A. DRIVER'S CONTROL PANEL


1. Adjustment of the air fan
speed
The air fan adjustment only operates
when the engine is running.
To adjust the air fl ow, press button 1
:
to increase the fl ow of air,
to decrease the fl ow of air. The level of air fl ow is shown by the
progressive lighting of the warning
lamps depicting the fan blades 1
.
By reducing the fl ow to minimum,
you deactivate the air conditioning
system (OFF).
To maintain an acceptable level of
comfort in the passenger compart-
ment, you should not leave this con-
trol too long in the OFF position.


2. Adjustment of air
distribution


)
Press button 2
to make the dis-
play run through the different
types of air distribution.
The air distribution chosen
is shown by the lighting of
the corresponding warning
lamps on the display 2
.


3. Mode of adjustment
of temperature for the
passenger


)
Press button 3
to have indepen-
dent passenger control of cabin
air temperature. The warning
lamp goes off.
While the passenger is adjusting tem-
perature, the warning lamp comes on.


4. Air recirculation

This control is for isolating disagree-
able odours or fumes coming from
outside.


)
Press button 4
to cut off the intake
of outside air and to activate recir-
culation of the air in the passenger
compartment. The warning lamp
comes on.
Avoid the extended use of air re-
circulation (risk of deterioration
of air quality and misting).

)
Press button 4
again to allow the
intake of exterior air. The warning
lamp goes off.



5. Air conditioning

The air fan control (adjusting the fl ow
of air) has to be activated in order for
air conditioning to be obtained.


)
Press button 5
. The warning
lamp comes on.
To be effective,
the air condi-
tioning should be operated only

with the windows closed.
If your vehicle is not equipped with
air conditioning, you will have the
same control panel but without the
A/C
button.

III
59
COMFORT

6. Demisting/defrosting the
rear screen
This function operates only if the en-
gine is running.


)
Press button 6
to activate/de-
activate the electric demisting/
defrosting of the rear screen and
door mirrors. The warning lamp
comes on.


7. Rapid demisting/defrosting
of front and rear windows
and door mirrors


)
Press button 7
. The warning
lamp comes on.
This function simultaneously activates:


- front demisting/defrosting,

- optimum fl ow of air,

- intake of exterior air,

- demisting/defrosting of door mir-
rors and heated rear screen,

- air conditioning, if necessary.
To stop the function, press button 7

again.


8. Adjustment of the fan air
temperature
This control is for adjusting the tem-
perature of the air in the passenger
compartment. It can be used in cold
weather as well as in hot weather, pro-
vided the air conditioning is active.
The adjustment of the temperature
is continuous and progressive start-
ing from left to right.


Adjustment of temperature



)
Press button 9
to take control of
the temperature. The warning
lamp comes on.

)
Rotate button 10
to adjust your
temperature.
The adjustment of the temperature
is continuous and progressive start-
ing from left to right. The demisting/defrosting
switches off automatically
to prevent excessive con-
sumption of power.

B. PASSENGER'S CONTROL
PA N E L

III
60
COMFORT
DIGITAL AIR CONDITIONING
The air conditioning system operates
with the engine running.

1. Automatic comfort
regulation
A press on this button,
confi rmed by the display of
the A/C
warning lamp and
of AUTO
on the screen, pro-
vides automatic control, at the tem-
perature selected, of all the following
5 functions:


- air fl ow,

- passenger compartment tem-
perature, left and right,

- air distribution,

- air conditioning,

- automatic air recirculation. For this facility to operate, it is rec-
ommended that all air vents are kept
open.
Using the AUTO
mode will prevent
the formation of mist inside the ve-
hicle in cold or humid weather.
When starting from cold, in order to
avoid a rush of cold air, the air fan
attains its optimum level progres-
sively.

2. Adjustment of temperature

To display the desired temperature,
press button:


- -
to decrease the temperature,

- +
to increase the temperature.
A setting around 21 will provide
an agreeable temperature level.
However, depending on your prefer-
ence, anything between 18 and 24
is quite normal.
For optimum comfort, it is recom-
mended to avoid a difference of set-
tings of more than than 3 between
right and left.
Actual temperatures experienced in
the passenger compartment are de-
pendent on external factors and for
this reason might not be identical to
those displayed.
On entering the vehicle, the inside
temperature may be much colder (or
hotter) than would be comfortable. It
serves no purpose to alter the tem-
perature displayed in an attempt to
attain your preference more rapidly.
The system operates automatically
to correct the difference in tempera-
ture as soon as possible.
Manual resumption of one or
more functions

It is possible to adjust each of the
functions 3, 4
, 6
and 10
manually.
The display of the "AUTO"
function
will then go off.

Resumption by the driver of the
adjustment of passenger compart-
ment temperatures
(for the front and
rear passengers)

A long press on the "AUTO" but-
ton cancels all personal settings,
including the passenger's tem-
perature, and returns the system
to automatic operation



A. DRIVER'S CONTROL
PANEL

III
62
COMFORT

5. Air recirculation



)
Press button 5
to cut off the in-
take of air from outside and to
activate recycling of the air in
the passenger compartment. the
warning lamp comes on.
Whilst retaining the other adjust-
ments, this function prevents un-
pleasant odours or fumes entering
the vehicle. Avoid extended use of
air recirculation (risk of deterioration
of air quality and misting).


)
Press button 5
again to allow entry
of air from the outside. The warn-
ing lamp goes off.
Air recirculation can also be con-
trolled by pressing the switch locat-
ed on the lower left of the steering
wheel (see "Fixed centred controls
steering wheel").


6. Activation/deactivation of
rear passenger controls
This button allows you to
permit or not the rear pas-
sengers to use their adjust-
ment controls.
There are three possible states for
this button:

Locking of the rear
passenger controls


Authorisation of
the rear passenger
controls


Reduction of the
air fl ow for the rear
passengers

With additional air conditioning, in
cold weather you are advised to
close the supply of air to the rear
passengers (no hot air distribution
possible via these air vents). The rear passengers can use their
adjustment controls at their conve-
nience. The driver imposes his adjustment
on the rear passengers. In this case,
the rear passenger controls are de-
activated.

7. Panel display mode: black
panel function
This function turns the
screen and switch backlight-
ing on or off.


- Function activated, pressing any
button will illuminate the screen
temporarily.

- pressing button 7
deactivates
the function, the illumination of
of buttons and screen is again
permanent.
This function optimises notably the
visual comfort for driving at night.


8. Demisting/defrosting the
rear screen
This function is active only when the
engine is running.


)
Press on button 8
to activate/
deactivate the electric demist-
ing/defrosting of the rear screen
and, according to version, of the
door mirrors. The warning lamp
comes on and the symbol appears
in the screen.
It switches off automatically
to prevent excessive con-
sumption of power. This button activates the recir-
culation of air within the pas-
senger compartment and also
has an automatic function.

III
63
COMFORT

9. Rapid demisting/defrosting
of the front and rear
windows


- Press button 9
. The warning
lamp comes on.
This function gives a rapid
demisting/defrosting of the
vehicle simultaneously with:


- front demisting/defrosting at opti-
mum temperature,

- optimum air fl ow,

- intake of exterior air,

- demisting/defrosting of the door
mirrors and rear screen,

- air conditioning, if necessary.
Press button 9
again or " AUTO"

to stop the function. Demisting/
defrosting of the door mirrors and
rear screen remains activated.


10. Air conditioning



)
Press button 10
to activate the
air conditioning.
The A/C
warning lamp comes on.
B. PASSENGER CONTROL PANELS

11. Front passenger

The front passenger can adjust their
temperature control independently
at any time by pressing buttons +

and -
.
The front passenger con-
trols the adjustment of their
own temperature.
The temperature setting for
the passenger is aligned
with that for the driver.


12. Rear passengers (right/left)

By default, in AUTO

position, the adjust-
ment of the air fl ow is
aligned on the front
ventilation.


)
Rotate the button
to decrease or in-
crease the air fl ow.

You can adjust the air fl ow only if this
is enabled by the driver (see button 6

of the driver’s control panel).







With Stop & Start, when demist-
ing has been activated, the STOP
mode is not available.

III
64
COMFORT
ADDITIONAL AIR
CONDITIONING
Additional air conditioning allows you
to optimise comfort levels in warm
weather conditions. It produces ad-
ditional fresh air which is supplied
using the rear air vents. The supply
of warm air via the rear air vents is
not possible using this system.
C. REAR PASSENGER
CONTROL PANELS
(RIGHT/LEFT)

13. Adjustment of
temperature
The rear passengers can adjust their
temperature controls independently
via buttons +
and -
.
Their setting cannot be greater than
that of the driver by more than 2.
Attainment of this maximum setting
is confi rmed by the fl ashing of its
display.


14. Adjustment of air fan
speed
The air fan operates only when the
engine is running.
To adjust the fl ow of air, press on
button:
to increase the air fl ow,
to decrease the air fl ow. The level of air fl ow is indicated on
the display by the progressive fi lling
of the fan blades.
By reducing the fl ow to minimum,
you switch off the air conditioning
system (OFF).
You can adjust the temperature and
the air fl ow only if the driver enables
you to (see button 6
of the driver’s
control panel).
This warning lamp signifi es
that the passenger controls
are locked, you can adjust
neither the temperature nor
the air fl ow, which remain aligned on
the preferences of the driver.
This warning lamp indi-
cates that the supply of air
is cut off
.
This position is recommended in
cold weather conditions, as the air
vents do not supply warm air.

IV
81
ACCESS
STARTING

1. "S": Steering lock

To unlock the steering, gently move
the steering wheel while turning the
key, without forcing it.


2. "M": Ignition on

Depending on the version of your
vehicle, the orange and red warn-
ing lamps should also come on for
a short time.


3. "D": Starter

Release the key as soon the engine
has started.
If the fi rst attempt fails, switch off the
ignition. Wait ten seconds then ope-
rate the starter again.


Steering lock


1. "

S":
After removing the key, turn
the steering wheel to lock the
steering. The key can only be
removed in position S
.

2. "M":
Ignition switched on, the
steering is unlocked (by turning
the key to position M
, move
the steering wheel gently if
necessary).

3. "D":
Starter position.


Key left in position "M"
audible warning
If you forget to remove the key from
the ignition, the ignition is switched
off automatically after one hour.
To switch the ignition back on, turn
the key to position S
then back to
position M
.

Do not run the engine in an en-
closed space or where there is
insuffi cient ventilation
.

You must always to keep the
engine running when moving in
order to retain braking and steer-
ing power assistance .

Never remove the ignition key
before the vehicle has come to a
complete stop.



Vehicles equipped with a
turbocharger
Never stop the engine without having
allowed it to run for a few seconds at
idle, this being the time required for
the turbocharger to return to a normal
speed.
Flicking the accelerator at the mo-
ment of switching off the ignition
could cause serious damage.

A heavy object (key fob...), attached
to the key and weighing down on
its shaft in the ignition switch, could
cause a malfunction. Never turn the key to this position
when the engine is running.

IV
82
ACCESS















Remote control problems

Following disconnection of the ve-
hicle battery, replacement of the re-
mote control battery or in the event
of a remote control malfunction, you
can no longer unlock, lock or locate
your vehicle.


)
First of all, use the key in the lock
to unlock or lock your vehicle.

)

Then, reinitialise the remote control.


Reinitialisation


)
Switch off the ignition.

)

Turn the key to position 2 (Ignition on)
.


)
Press the closed padlock imme-
diately for a few seconds.

)
Switch off the ignition and re-
move the key from the ignition
switch.
The remote control is fully opera-
tional again. Battery ref.: CR1620/3 volts.
If the remote control bat-
tery is fl at, you are in-
formed by lighting of this
warning lamp, an audible
signal and a message on
the multifunction screen.


)
Unclip the casing using a coin at
the notch.

)
Slide the fl at battery out of its lo-
cation.

)
Slide the new battery into its lo-
cation observing the original di-
rection.

)
Clip the casing together.

)
Reinitialise the remote control.

Changing the battery

If the problem persists, contact a
CITROËN dealer as soon as pos-
sible.

IV
87
ACCESS

Reinitialisation
If a window does not rise automati-
cally, its operation must be reini-
tialised:


)
pull the control until the window
stops,

)
release the control and pull it
again until the window closes
fully,

)
continue to hold the control for
approximately one second after
the window has closed,

)
press the control to lower the
window automatically to the low
position,

)
when the window has reached
the low position, press the con-
trol again for approximately
one second.

The safety anti-pinch function
is not operational during these
operations.




Deactivation of the rear
electric window and door
controls


)
For the safety of your children,
press control 5
to deactivate the
rear electric window controls re-
gardless of their position. Always remove the key from the
ignition when leaving the vehicle,
even for a short time.
If an obstacle is encountered during
operation of the electric windows,
you must reverse the movement of
the window. To do this, press the
control concerned.
When the driver operates the con-
trols for the passengers' electric
windows, they must ensure that no
one is preventing correct closing of
the windows.
The driver must ensure that the
passengers use the electric win-
dows correctly.
Be aware of children when opera-
ting the windows.
This warning lamp comes
on temporarily on the instru-
ment panel on deactivation
and each time the ignition is
switched on.
This control also deactivates the
interior controls for the rear doors
(refer to the section "Child safety -
Electric child lock").