oil change Citroen C5 2000 (DC/DE) / 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2000, Model line: C5, Model: Citroen C5 2000 (DC/DE) / 1.GPages: 259, PDF Size: 2.29 MB
Page 19 of 259
Downloaded from www.Manualslib.com manuals search engine GENERAL
Engine type
Engine with filter change
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After oil change
Braking circuit
Hydraulic circuit
Cooling system
Fuel tank capacity
6FZ RFN RLZ RHY RHZ
4.25 4.75
1.7 1.5
1.8 1.8 1.8 1.8
6 6 8.3
3 3 5.3
4.3
8.8 – 9.3 (*) 8.8 10.7
66 68
16
CAPACITIES (in litres)
1.8i 16V 2.0i 16V 2.0 HPi 2.0 HDiPetrol
Diesel
Vehicle without air conditioning
(*) = With automatic gearbox
ESSENTIAL : Systematically check the oil level using the oil dipstick.
Auto.Auto.Auto.
Page 20 of 259
Downloaded from www.Manualslib.com manuals search engine GENERAL
17
Engine type
Engine with filter change
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After oil change
Braking circuit
Hydraulic circuit
Cooling system
Fuel tank capacity
CAPACITIES (in litres)
Petrol
Vehicle with air conditioning
(*) = With automatic gearbox.
ESSENTIAL : Systematically check the oil level using the oil dipstick.
1.8i 16V 2.0i 16V 3.0i V6
Auto.Auto.Auto.
6FZ RFN RLZ XFX
4.25 5.25
1.7 2
1.8 1.8 1.8
6 6 8.3
3 3 5.3
4.3
8.8 – 9.3 (*) 8.8 14
662.0 HPi
Page 21 of 259
Downloaded from www.Manualslib.com manuals search engine 18
GENERAL
Engine type
Engine with filter change
EBetween Min. and Max.
5-speed gearbox
Automatic gearbox
After oil change
Braking circuit
Hydraulic circuit
Cooling system
Fuel tank capacity
CAPACITIES (in litres)
Diesel
Vehicle with air conditioning
ESSENTIAL : Systematically check the oil level using the oil dipstick
RHY RHZ 4HX
4.5 4.75
1.7 1.5
1.8 1.8
6 8.3
3 5.3
4.3
10.7 - 11.7 - (With additional heating).
68 2.0 HDi 2.2 HDi
Auto.
Auto.
Page 108 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
105
COOLING SYSTEM SPECIFICATIONS
Engine : XFX
(1)Heater matrix
(2)Venting chamber
(3) Thermostat.
(4) Coolant outlet housing
(5) Coolant inlet housing
(6) Engine cooling radiator
(7) Venting chamber
(8) Bleed screw
(9) Water / oil exchanger
(10) Thermostat
(11) Thermostat(Coolant outlet housing)
(12) Thermal switch
(10). (11)and (12): Tightening 1.7 ± 0.4 m.daN
B1GP041P
Page 109 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
106
COOLING SYSTEM SPECIFICATIONS
Engines : RHY-RHZ
(1) Venting chamber
(2) Heater matrix
(3) Coolant inlet housing
(4)Exhaust gas / coolant heat exchanger
(5)Bleed screw
(6)Cylinder block drain plug
(7) Coolant outlet housing
(8) Additional heating (Option or according to version)
(9) Radiator
(10) Coolant / oil heat exchanger
B1GP08EP
Page 110 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
107
COOLING SYSTEM SPECIFICATIONS
Engine : 4HX
(10)Heater matrix
(2) Coolant inlet housing.
(3) Exhaust gas / coolant heat exchanger
(4) Bleed screw
(5)Coolant outlet housing.
(6)Additional heating (Option or according to version)
(7) Radiator
(8)Air / coolant heat exchanger
(9) Coolant / oil heat exchanger
(10) Venting chamber
B1GP08HP
Page 184 of 259
Downloaded from www.Manualslib.com manuals search engine 181
BE4/5 GEARBOX SPECIFICATION
Engines : 6FZ - RFN - RLZ - RHY
CLUTCH
GEARBOX
DRIVESHAFTS
B2CP3CVDB2CP3CWCB2CP3CXC
Adjustments.
WARNING : Control cables should be adjusted each time the gearbox is
removed or cables changed.
WARNING : Do not use oil to detach the ball-joints.
To release the ball-joint, press at the centre «a»then pull the ball-joint upwards.
Ball-joints alone can be changed by removing the unlocking key with the aid of two
thin screwdrivers, unclip at «b».
To unlock the ball-joint, turn in the direction of the arrow «c».
Page 193 of 259
Downloaded from www.Manualslib.com manuals search engine 190
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
B2CP3CTDB2CP3BYC
Adjustments.
WARNING : Control cables should be adjusted each time the gearbox is
removed or cables changed.
WARNING : Do not use oil to detach the ball-joints.
To release the ball-joint, press at the centre«a»then pull the ball-joint upwards.
Ball-joints alone can be changed by removing the unlocking key with the aid of two
thin screwdrivers, unclip at «b».
Page 197 of 259
Downloaded from www.Manualslib.com manuals search engine 194
CLUTCH
GEARBOX
DRIVESHAFTS
4 HP 20 AUTOACTIVE GEARBOX SPECIFICATION
Engines : XFX - 4HX
Tightening torques m.daN.
Gearbox exterior.
(2) Oil channel union fixing Exteror fixing of2.5 ± 0.5
(3) Exterior fixing of converter cover on clutch housing 2.3 ± 0.5
(4) Speedometer take-off aperture plug1 ± 0.1
(5)Steel casing fixing0.6 ± 0.1
(6) Converter fixing on engine6 ± 1
(7) Interior fixing of converter cover on clutch housing2.3 ± 0.5
(8) Torx fixing of converter cover on clutch housing2.3 ± 0.5
Drain plug4.5 ± 0.8
Heat exchanger fixing3.5 ± 0.5
Selector lever position switch fixing1 ± 0.2
Converter cover fixing on engine cover(XFX engine) 6.5 ± 1
Converter cover fixing on engine cover(4HX engine) 5.8 ± 1
B2CP3CZCB2CP24BCB2CP24CC