gearbox Citroen C5 2009.5 (RD/TD) / 2.G User Guide

IX
136
D R I V I N G
Automatic operation

 Move the gear lever to position D .
The gearbox constantly selects the gear that is best suited to the
following parameters:
- driving style,
- road profi le
- vehicle load.
The gearbox operates without requir-
ing any intervention on your part.
For certain manoeuvres (for ex-
ample overtaking), you can obtain
maximum acceleration by pressing
the accelerator pedal hard down
past the point of resistance, which
then produces an automatic change
down to a lower gear. When braking, the gearbox may
change down automatically in order
to provide effective engine braking.
If you lift your foot off the accelera-
tor abruptly, the gearbox will not en-
gage a higher gear.
Manual operation
Position of the gear lever for manual
gear changing.

 Move the gear lever to position M .

 Push the gear lever towards the
" + " sign to change up a gear.

 Pull the gear lever towards the
" - " sign to change down a gear. - If the vehicle stops or reduces
speed (for example when ap-
proaching a stop sign), the gear-
box changes down automatically
to fi rst gear.
- In sequential mode, it is not nec- essary to release the accelerator
during gear changes.
- A request to change gear is ac- cepted only if the engine speed
permits it.
- The SPORT and SNOW modes
do not operate in sequential
mode.

IX
!
137
D R I V I N G
SPORT and SNOW
programmes
SPORT programme "S"
These two special programmes sup-
plement the automatic operation in
very particular conditions of use.

 With the gear lever in po-
sition D and the engine
running, press button A . SNOW programme "
 "

 With the gear lever in position D
and the engine running, press
button B .
The gearbox adapts to driving on
slippery roads.
This programme makes moving off
easier and improves traction in con-
ditions of poor grip.

 appears on the instru-
ment panel.
The gearbox automatically favours a
dynamic driving style.

S appears on the instrument panel. Return to automatic operation

 At any time, press the button se-
lected again to exit from the pro-
gramme engaged and return to
auto-adaptive mode. A strong snatch may be felt
when selecting
R for reverse
gear.
In the event of a malfunction, the
gearbox is blocked in one gear;
do not exceed a speed of 62 mph
(100 km/h).
Do not turn off the engine while the
gear selector is in position D or R .
Never press the accelerator and
brake pedals simultaneously.
Braking and acceleration should
be done with the right foot only.
Pressing both pedals simultane-
ously may damage the gearbox.
Consult a CITROËN dealer.

IX
142
D R I V I N G
CRUISE CONTROL
System which automatically main-
tains the vehicle speed programmed
by the driver, without any action on
the accelerator pedal.
The cruise control is switched on
manually: the vehicle speed must be
at least 25 mph (40 km/h) and you
must be in at least:
- 4th gear for manual gearboxes,
- 2nd gear for automatic gearboxes. Displays on the instrument
panel
The programmed information is
grouped together in zone
A of the
instrument panel.
Programming

 Press button 4 to select cruise
control mode "
CRUISE
" .
Steering mounted controls
The cruise control switches are lo-
cated on the left-hand side of the
steering wheel. The selection is confi rmed by the
display of the function in zone
A of
the instrument panel.
When the function is selected, no
cruising speed has yet been
memorised. Once the desired speed has been
reached using the accelerator, press
button
1 or button 2 . The cruising
speed is then memorised and cruise
control is activated. The cruising
speed is displayed in zone A of the
instrument panel, and "ON" is dis-
played.
Adjustment of the memorised
speed while cruise control is
in operation
You can adjust the memorised
speed, displayed in zone A , by
pressing:
- Button 1 to increase the speed.
- Button 2 to reduce the speed.
Successive presses will modify the
cruise speed in steps of 1 mph and a
continuous press in steps of 5 mph.
You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
The vehicle speed may vary slightly
from that memorised.
If during cruise control the system
cannot keep to the cruise speed
(e.g. on a steep descent), then the
speed fl ashes. If necessary, brake to
curb your speed.

IX
!
143
D R I V I N G
Cruise control must only be
used where the traffi c condi-
tions permit driving at a con-
stant speed.
Do not use it on congested roads
or when the weather or the road
conditions are poor.
The driver must remain attentive
and in complete control of the ve-
hicle.
You are recommended to keep your feet within range of the pedals.
Overriding the programmed
speed
While cruise control is in operation,
it is always possible to go above the
programmed speed simply by pres-
sing the accelerator pedal (for ex-
ample to overtake another vehicle).
The speed displayed in zone A
fl ashes.
You only have to release the ac-
celerator pedal to return to the pro-
grammed speed.
Suspension/Resumption

 Either by pressing the brake
pedal or the clutch pedal.

 Or by pressing button 3 .

 Or by the ESP or ASR systems
being active.
For vehicles with a manual gearbox,
cruise control is deactivated if the
gear lever is in neutral. Reactivation
-
By recalling the memorised
speed
After deactivation, press button 3 .
Your vehicle automatically returns
to the memorised cruising speed.
The memorised speed and "ON"
are displayed in zone A .
If the memorised cruising speed is higher than the current speed,
the vehicle will accelerate strong-ly to reach the current speed.
- By selecting the current speed
Press button 1 or 2 once the de-
sired speed has been reached.
The new speed and "ON" will
appear in zone A .
Return to normal driving

 Either press on button 5 .

 Or select the cruise control func-
tion.

 Or stop the engine.
The speed that was chosen is no
longer memorised.

"PAUSE" will be displayed in zone A
of the instrument panel.
These actions do not cancel the
cruising speed which remains dis-
played on the instrument panel. Operating fault

If there is a malfunction, a mes-
sage is displayed accompanied by
an audible signal and lighting of the

SERVICE warning lamp.
Have it checked by a CITROËN
dealer.

X
!
162
C H E C K S
Brake pads Brake wear depends on
the style of driving, par-
ticularly in the case of ve-
hicles used in town, over
short distances. It may be
necessary to have the condition of
the brakes checked, even between
vehicle services.
Unless there is a leak in the circuit, a
drop in the brake fl uid level indicates
that the brake pads are worn.
Manual gearbox
The gearbox does not
require any maintenance
(no oil change).
Automatic gearbox The gearbox does not
require any maintenance
(no oil change). Brake disc wear
For information relating to
checking the brake disc
wear, contact a CITROËN
dealer.
Parking brake If a loss of effectiveness
of this system is noticed,
the parking brake must be
checked, even between
two services.
This system must be checked by a
CITROËN dealer. Only use products recom-
mended by CITROËN or
products of equivalent quality
and specifi cations.
Do not use a dry cloth with an abra-
sive product for the maintenance of
aluminium parts; use a sponge and
soapy water.
In order to optimise the operation
of units as important as the braking
system, CITROËN selects and of-
fers very specifi c products.
To avoid damaging the electrical
units, the use of a high pressure
washer in the engine compartment
is strictly
prohibited .
Refer to the Maintenance and
Warranty Guide for the details of the level checking interval for this com-
ponent.
Refer to the Warranty and
Maintenance Record for details of
the level checking interval for this
component.

XII
194
T E C H N I C A L D A T A

MODELS:
ENGINES AND GEARBOXES

Model codes:
RD... RW...
6FYC RFJF RFJC/FF 5FV-5FN XFVJ

PETROL ENGINES
1.8 litre 16V
127 hp
2 litre 16V
143 hp
Biofl ex 2 litre
16V 143 hp
1.6 litre 156 hp
3 litre V6 24V
215 hp
Cubic capacity (cc) 1 749 1 997 1 997 1 598 2 946
Bore x stroke (mm) 82.7 x 81.4 85 x 88 85 x 88 77 x 8 5.8 87 x 82.6
EU standard maximum power (kW) 92 103 103 115 155
Maximum power engine speed (rpm) 6 000 6 000 6 000 6 000 6 000
EU standard maximum torque (Nm) 170 200 200 240 290
Maximum torque engine speed (rpm) 3 750 4 000 4 000 1 400 3 750
Fuel Unleaded Unleaded Unleaded/E85 Unle aded Unleaded
Catalytic converter Yes Yes Yes Yes Yes

GEARBOXES Manual
(5-speed) Auto.
(4-speed) Manual
(5-speed) Manual
(6-speed) Auto.
(6-speed)

OIL CAPACITIES (in litres)
Engine (with fi lter replacement) 5 5 - 4.2 4.75
Gearbox - Final drive - - - - -

XII
197
T E C H N I C A L D A T A

MODELS:
ENGINES AND GEARBOXES

Model codes:
RD... RW...
9HZC

9HZC/1
RHF8 RHH-RHE X8ZA

DIESEL ENGINES
1.6 litre HDi
110 hp
2 litre HDi
140 hp
2 litre HDi 163 hp
3 litre V6 HDi
240 hp
Cubic capacity (cc) 1 560 1 997 1 997 2 993
Bore x stroke (mm) 75 x 88.3 85 x 88 85 x 88 84 x 90
EU standard maximum power (kW) 80 103 120 177
Maximum power engine speed (rpm) 4 000 4 000 3 750 3 800
EU standard maximum torque (Nm) 240 320 340 450
Maximum torque engine speed (rpm) 1 750 2 000 2 000 1 600
Fuel Diesel Diesel Diesel Diesel
Catalytic converter Yes Yes Yes Yes
Particle emission fi lter (PEF) Yes Yes Yes Yes

GEARBOXES Manual
(5-speed) Manual
(6-speed) Manual
(6-speed) Auto.
(6-speed) Auto.
(6-speed)

OIL CAPACITIES (in litres)
Engine (with fi lter replacement) 3.75 5.25 - -
Gearbox - Final drive 1.9 - - -