brake Citroen C5 2009.5 (RD/TD) / 2.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009.5, Model line: C5, Model: Citroen C5 2009.5 (RD/TD) / 2.GPages: 314, PDF Size: 19.25 MB
Page 152 of 314
IX
!
134
D R I V I N G
Mode selection Displays on the instrument panel
automatic mode: gear lever in
position D ,
sequential mode: gear lever in
position M ,
SPORT mode: gear lever in po-
sition D and button A pressed,
SNOW mode: gear lever in posi-
tion D and button B pressed. The position of the gear lever and
the driving mode are displayed on
the instrument panel dial
C .
A position grille associated with the
gear lever allows you to view the se-
lected position.
For safety:
- position P can be disen-
gaged only if you press the
brake pedal,
- when a door is opened, an au- dible signal is heard if the gear
lever is not in position P ,
- always make sure that the gear lever is in position P before you
leave your vehicle.
If the gearbox is in position P but
the position of the gear lever is dif-
ferent, reposition the gear lever on
P so that you can start the vehicle.
AUTOMATIC GEARBOX
Automatic gearbox which offers a
choice between the comfort of fully
automatic operation, enhanced by
the sport and snow programmes, or
manual gear changing.
Four driving modes are provided:
- automatic operation for elec-
tronic control of the gears by the
gearbox,
- the SPORT programme for a
more dynamic driving style,
- the SNOW programme to im-
prove driving when the grip is
poor,
- manual operation for sequen-
tial changing of the gears by the
driver.
Page 153 of 314
IX
!
135
D R I V I N G
Never select positions P or R
if the vehicle is not stationary.
If, while the vehicle is moving, po-
sition N is engaged inadvertently,
allow the engine to idle before en-
gaging position D or M .
Moving off
To start the engine, the gear le-
ver must be in position P or N .
Operate the starter.
When the engine is running,
place the gear lever on R , D or
M as required.
Check, in the instrument panel,
the position engaged.
Release the brake pedal and ac-
celerate.
To avoid a possible difference
between the position of the gear
lever and the actual position of
the gearbox, always exit from
position P with the ignition on
and brake pedal applied.
Otherwise, when the ignition is on or
the engine is running:
reposition the gear lever in posi-
tion P ,
put your foot on the brake pedal
and then select the gear you
want. Park
This position of the gear le-
ver is used to prevent the
vehicle from moving when
you are stationary.
To select position P , move the
gear lever back to the highest
position (towards R ), then push
it forwards and then to the left.
To exit position P , move the gear
lever to the right and then to the
position you want.
Only engage this position when
the vehicle is completely sta-
tionary. In this position, the front
wheels are locked. Make sure
that the gear lever is correctly
positioned. Reverse gear
Only engage this position
when the vehicle is station-
ary. To prevent snatching,
do not accelerate too soon
after selection.
Neutral Never select position N if
the vehicle is moving.
Page 155 of 314
IX
!
137
D R I V I N G
SPORT and SNOW
programmes
SPORT programme "S"
These two special programmes sup-
plement the automatic operation in
very particular conditions of use.
With the gear lever in po-
sition D and the engine
running, press button A . SNOW programme "
"
With the gear lever in position D
and the engine running, press
button B .
The gearbox adapts to driving on
slippery roads.
This programme makes moving off
easier and improves traction in con-
ditions of poor grip.
appears on the instru-
ment panel.
The gearbox automatically favours a
dynamic driving style.
S appears on the instrument panel. Return to automatic operation
At any time, press the button se-
lected again to exit from the pro-
gramme engaged and return to
auto-adaptive mode. A strong snatch may be felt
when selecting
R for reverse
gear.
In the event of a malfunction, the
gearbox is blocked in one gear;
do not exceed a speed of 62 mph
(100 km/h).
Do not turn off the engine while the
gear selector is in position D or R .
Never press the accelerator and
brake pedals simultaneously.
Braking and acceleration should
be done with the right foot only.
Pressing both pedals simultane-
ously may damage the gearbox.
Consult a CITROËN dealer.
Page 159 of 314
IX
141
D R I V I N G
In the event of a steep descent or
under excessive acceleration, the
speed limiter (which does not act
on the brakes) may not be able to
prevent the vehicle from exceeding
the programmed speed.
U s e o f a fl o o r m a t o t h e r t h a n t h a t
recommended by CITROËN may
affect the normal operation of the
accelerator pedal and hamper the
operation of the speed limiter.
Floor mats approved by CITROËN
a r e fi t t e d w i t h a 3 r d fi x i n g l o c a t e d i n
the pedal area to avoid any risk of
interference with the pedals.
Suspension/Resumption
Press on button 3 .
This action causes the information
"PAUSE" to appear in zone A of the
instrument panel.
This action does not cancel the
memorised maximum speed which
remains displayed in zone A of the
instrument panel. Overriding the programmed
speed
The accelerator pedal has an end-
of-travel switch. In order to exceed
the memorised maximum speed at
any time, you can press the pedal
all the way down. While the speed
is being exceeded, the speed dis-
played in zone
A w i l l fl a s h . Y o u h a v e
only to release the accelerator pedal
to return below the maximum speed,
to restore the function.
T h e s p e e d w i l l a l s o fl a s h i f t h e s p e e d
limiter is not able to prevent the vehi-
cle from exceeding the programmed
speed (e.g. on a steep descent or
under excessive acceleration).
To reactivate the speed limiter, re-
lease the accelerator to slow to a
speed lower than the programmed
speed. Return to normal driving
Either press on button 5 .
Or select the speed limiter func-
tion.
Or stop the engine.
Operating fault
If there is a malfunction, a mes-
sage is displayed accompanied by
an audible signal and lighting of the
SERVICE warning lamp.
Have it checked by a CITROËN
dealer.
Page 161 of 314
IX
!
143
D R I V I N G
Cruise control must only be
u s e d w h e r e t h e t r a f fi c c o n d i -
tions permit driving at a con-
stant speed.
Do not use it on congested roads
or when the weather or the road
conditions are poor.
The driver must remain attentive
and in complete control of the ve-
hicle.
You are recommended to keep your feet within range of the pedals.
Overriding the programmed
speed
While cruise control is in operation,
it is always possible to go above the
programmed speed simply by pres-
sing the accelerator pedal (for ex-
ample to overtake another vehicle).
The speed displayed in zone A
fl a s h e s .
You only have to release the ac-
celerator pedal to return to the pro-
grammed speed.
Suspension/Resumption
Either by pressing the brake
pedal or the clutch pedal.
Or by pressing button 3 .
O r b y t h e E S P o r A S R s y s t e m s
being active.
For vehicles with a manual gearbox,
cruise control is deactivated if the
gear lever is in neutral. Reactivation
-
By recalling the memorised
speed
After deactivation, press button 3 .
Your vehicle automatically returns
to the memorised cruising speed.
The memorised speed and "ON"
are displayed in zone A .
If the memorised cruising speed is higher than the current speed,
the vehicle will accelerate strong-ly to reach the current speed.
- By selecting the current speed
Press button 1 or 2 once the de-
sired speed has been reached.
The new speed and "ON" will
appear in zone A .
Return to normal driving
Either press on button 5 .
Or select the cruise control func-
tion.
Or stop the engine.
The speed that was chosen is no
longer memorised.
"PAUSE" will be displayed in zone A
of the instrument panel.
These actions do not cancel the
cruising speed which remains dis-
played on the instrument panel. Operating fault
If there is a malfunction, a mes-
sage is displayed accompanied by
an audible signal and lighting of the
SERVICE warning lamp.
Have it checked by a CITROËN
dealer.
Page 177 of 314
X!
159
C H E C K S
Check all of these levels regularly
and top them up if necessary, unless
otherwise indicated.
I f a l e v e l d r o p s s i g n i fi c a n t l y , h a v e t h e
corresponding system checked by a
CITROËN dealer.
Oil level Oil change
Refer to the Maintenance and
Warranty Guide for details of the in-
terval for this operation.
O i l s p e c i fi c a t i o n
The oil must correspond to your engine
and conform to the manufacturer's
recommendations. Brake fluid level
Fluid change
Refer to the Maintenance and
Warranty Guide for details of the in-
terval for this operation.
T h i s fl u i d m u s t b e c h a n g e d r e g u l a r l y .
Fluid which has been used exces-
sively may cause a loss of braking
e f fi c i e n c y .
F l u i d s p e c i fi c a t i o n
T h e b r a k e fl u i d m u s t c o n f o r m t o t h e
manufacturer's recommendations
and meet the DOT4 standard.
The reading will only be
correct if the vehicle is on
level ground and the engine
has been off for more than
15 minutes.
The check is carried out either when
the ignition is switched on using the
oil level indicator on the instrument
panel, or using the dipstick.
Check this level also between each
scheduled service and before long
journeys. T h e b r a k e fl u i d l e v e l s h o u l d
be close to the "MAX" mark.
If it is not, check the brake
pad wear.
In order to maintain the reli-
ability of the engine and emis-sion control system, the use
of additives in the engine oil is
prohibited. Power steering fluid or power
steering and suspension
fluid level
T h i s fl u i d m u s t b e t o p p e d u p
by a CITROËN dealer.
Dipstick
There are 2 marks on the
dipstick:
-
A = max; never ex-
ceed this level,
- B = min; top up the level
v i a t h e o i l fi l l e r c a p , u s -
ing the type of oil suited
to your engine.
Page 180 of 314
X
!
162
C H E C K S
Brake pads Brake wear depends on
the style of driving, par-
ticularly in the case of ve-
hicles used in town, over
short distances. It may be
necessary to have the condition of
the brakes checked, even between
vehicle services.
Unless there is a leak in the circuit, a
d r o p i n t h e b r a k e fl u i d l e v e l i n d i c a t e s
that the brake pads are worn.
Manual gearbox
The gearbox does not
require any maintenance
(no oil change).
Automatic gearbox The gearbox does not
require any maintenance
(no oil change). Brake disc wear
For information relating to
checking the brake disc
wear, contact a CITROËN
dealer.
Parking brake If a loss of effectiveness
of this system is noticed,
the parking brake must be
checked, even between
two services.
This system must be checked by a
CITROËN dealer. Only use products recom-
mended by CITROËN or
products of equivalent quality
a n d s p e c i fi c a t i o n s .
Do not use a dry cloth with an abra-
sive product for the maintenance of
aluminium parts; use a sponge and
soapy water.
In order to optimise the operation
of units as important as the braking
system, CITROËN selects and of-
f e r s v e r y s p e c i fi c p r o d u c t s .
To avoid damaging the electrical
units, the use of a high pressure
washer in the engine compartment
is strictly
prohibited .
Refer to the Maintenance and
Warranty Guide for the details of the level checking interval for this com-
ponent.
Refer to the Warranty and
Maintenance Record for details of
the level checking interval for this
component.
Page 193 of 314
XI
174
P R A C T I C A L I N F O R M A T I O N
T h e s i d e r e p e a t e r i s s e a l e d .
I f t h e b u l b i s f a u l t y , r e p l a c e t h e s i d e
r e p e a t e r .
C o n s u l t a C I T R O Ë N d e a l e r .
Side repeaters
Rear lamps (Saloon)
I d e n t i f y t h e f a i l e d b u l b .
1. Brake
lamps and sidelamps:
P 2 1 W / 5 W
2. Sidelamps: R 5 W
3. Reversing lamp: H 2 1 W
4. Foglamps: H 2 1 W
5. Direction indicators: P 2 1 W
O p e n t h e b o o t .
U s i n g a fl a t s c r e w d r i v e r , r e m o v e
t h e 3 c l i p s w h i c h fi x t h e t r i m i n
t h e l a m p a r e a .
P a r t i a l l y r e m o v e t h e t r i m F .
Disconnect the connector G .
Boot-mounted lamps
Detach the bulb holder H .
R e p l a c e t h e b u l b .
R e fi t t h e b u l b h o l d e r H .
R e fi t t h e c o n n e c t o r G .
R e p l a c e a n d fi x t h e t r i m F with its
c l i p s .
W h e n r e fi t t i n g , t a k e c a r e n o t t o
trap the electrical cables.
Page 194 of 314
XI
174
P R A C T I C A L I N F O R M A T I O N
T h e s i d e r e p e a t e r i s s e a l e d .
I f t h e b u l b i s f a u l t y , r e p l a c e t h e s i d e
r e p e a t e r .
C o n s u l t a C I T R O Ë N d e a l e r .
Side repeaters
Rear lamps (Saloon)
I d e n t i f y t h e f a i l e d b u l b .
1. Brake
lamps and sidelamps:
P 2 1 W / 5 W
2. Sidelamps: R 5 W
3. Reversing lamp: H 2 1 W
4. Foglamps: H 2 1 W
5. Direction indicators: P 2 1 W
O p e n t h e b o o t .
U s i n g a fl a t s c r e w d r i v e r , r e m o v e
t h e 3 c l i p s w h i c h fi x t h e t r i m i n
t h e l a m p a r e a .
P a r t i a l l y r e m o v e t h e t r i m F .
Disconnect the connector G .
Boot-mounted lamps
Detach the bulb holder H .
R e p l a c e t h e b u l b .
R e fi t t h e b u l b h o l d e r H .
R e fi t t h e c o n n e c t o r G .
R e p l a c e a n d fi x t h e t r i m F with its
c l i p s .
W h e n r e fi t t i n g , t a k e c a r e n o t t o
trap the electrical cables.
Page 196 of 314
XI
176
P R A C T I C A L I N F O R M A T I O N
Boot-mounted lamps
O p e n t h e b o o t .
U s i n g a fl a t s c r e w d r i v e r , r e m o v e
t h e 3 c l i p s w h i c h fi x t h e t r i m i n
t h e l a m p a r e a .
P a r t i a l l y r e m o v e t h e t r i m F .
Disconnect the connector G .
Rear lamps (Tourer)
I d e n t i f y t h e f a i l e d b u l b .
1. Brake
lamps and sidelamps:
P 2 1 W / 5 W
2. Sidelamps: R 5 W
3. Reversing lamp: H 2 1 W
4. Foglamps: H 2 1 W
5. Direction indicators: P 2 1 W
Detach the bulb holder H .
R e p l a c e t h e b u l b .
R e fi t t h e b u l b h o l d e r H .
R e fi t t h e c o n n e c t o r G .
R e p l a c e a n d fi x t h e t r i m F with its
c l i p s .