ECU Citroen C5 2009.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009.5, Model line: C5, Model: Citroen C5 2009.5 (RD/TD) / 2.GPages: 314, PDF Size: 19.25 MB
Page 3 of 314
6
F A M I L I A R I S A T I O N
This operation should only be per-
formed while the vehicle is stationary.
Open the driver’s door.
Pull release lever A to unlock.
Bonnet release
O P E N I N G
Lift up safety catch B , t h e n r a i s e t h e
bonnet.
Saloon
Tourer
Spare wheel
The tools are to be found in a protective
holder inside the spare wheel.
166 Access to the spare wheel
To access the spare wheel:
L i f t u p t h e b o o t fl o o r a n d f o l d i t i n
two (Saloon) or secure it using the
retractable hook (Tourer).
Attach the hook to the top of the
boot.
T o r e m o v e t h e s p a r e w h e e l , d e t a c h
the strap then push the wheel for-
w a r d s , b e f o r e l i f t i n g i t o u t .
Temporary puncture repair kit
The kit is a complete system including a
compressor and a sealing product.
163
152
Page 60 of 314
III
61
C O M F O R T
Storing driving positions
System which takes into account the
settings of the driver's seat and air
conditioning. It enables you to store
up to two positions using the buttons
on the side of the driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard indicating
that the settings have been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints removed, they must be in place
and correctly adjusted.
Page 61 of 314
III
61
C O M F O R T
Storing driving positions
System which takes into account the
settings of the driver's seat and air
conditioning. It enables you to store
up to two positions using the buttons
on the side of the driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard indicating
that the settings have been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints removed, they must be in place
and correctly adjusted.
Page 62 of 314
III
62
C O M F O R T
REAR SEATS
Bench seat, the left-hand (2/3) or
right-hand (1/3) section of which
can be folded to adapt the boot load
space.
Removing the seat cushion
Move the corresponding front
seat forwards if necessary.
Raise the front of the seat cushion 1 .
Tilt the seat cushion 1 fully
against the front seat.
Remove the seat cushion 1 from
i t s fi x i n g s b y p u l l i n g u p w a r d s . Refitting the seat cushion
Position the seat cushion 1 verti-
c a l l y i n i t s fi x i n g s .
Fold down the seat cushion 1 .
Press on the seat cushion to secure it.
Folding the seat
In order to fold a rear seat without
any risk of damage, always start
with the seat cushion, never with
the seat back:
move the corresponding front
seat forwards if necessary,
raise the front of the seat cushion 1 ,
tilt the seat cushion 1 fully against
the front seat,
check that the seat belt is posi-
tioned correctly on the side of
the seat back,
lower or remove the head re-
straints if necessary,
pull the control 3 forwards to re-
lease the seat back 2 ,
tilt the seat back 2 .
The seat cushion 1 can be removed
to increase the loading volume. Returning the seat back to its
original position
When returning the rear seat to its
original position:
put the seat back 2 in the upright
position and secure it,
fold the seat cushion 1 ,
r e fi t t h e h e a d r e s t r a i n t s o r p u t
them back in place.
When returning the rear seat to its
original position, take care not to trap
the seat belts and ensure that their
buckles are positioned correctly.
The red indicator on the control 3
should no longer be visible; if it is,
push the seat fully back.
Page 113 of 314
VI
99
F I T T I N G S
BOOT FITTINGS (SALOON)
1. B a t t e r y l o c a t i o n f o r v e h i c l e s w i t h
V 6 H D i e n g i n e .
2. B o o t fl o o r ( s p a r e w h e e l s t o r a g e ) .
3. B o o t l a m p .
4. L o c a t i o n f o r 6 C D c h a n g e r . Luggage securing rings
U s e t h e 4 s e c u r i n g r i n g s o n t h e
b o o t fl o o r t o s e c u r e y o u r l u g -
g a g e .
F o r s a f e t y r e a s o n s i n t h e e v e n t o f
s h a r p b r a k i n g , y o u a r e a d v i s e d t o
p l a c e h e a v y o b j e c t s a s f a r f o r w a r d
i n t h e b o o t a s p o s s i b l e .
Page 114 of 314
VI
1 0 0
F I T T I N G S
BOOT FITTINGS (TOURER)
1. Hook
F o r s h o p p i n g b a g s .
2. Torch
T o r e c h a r g e , r e t u r n i t t o i t s s t o r - a g e p o s i t i o n .
3. Storage net o r Battery com-
partment (for vehicles with
3 litre V6 HDi engine).
T h i s p r o v i d e s a c c e s s t o t h e b a t t e r y .
1. Luggage-cover blind
( s e e d e t a i l s o n f o l l o w i n g p a g e )
2. Luggage securing rings
U s e t h e 4 s t o w i n g r i n g s p r o v i d e d o n t h e b o o t fl o o r t o s e c u r e y o u r
l o a d s .
F o r s a f e t y r e a s o n s i n t h e e v e n t o f s h a r p b r a k i n g , y o u a r e a d -
v i s e d t o p l a c e h e a v y o b j e c t s a s
f a r f o r w a r d s a s p o s s i b l e .
3. Hooks
T h e s e a l l o w a c a r g o n e t t o b e fi t t e d ( s e e d e t a i l s o n f o l l o w i n g
p a g e ) .
1. Boot lamp
2. 12 V accessories socket (100 W
maximum)
C i g a r l i g h t e r t y p e 1 2 v o l t s o c k e t . I t i s l o c a t e d o n t h e r e a r r i g h t -
h a n d t r i m .
3. Loading height control
Y o u c a n c h a n g e t h e h e i g h t o f t h e v e h i c l e t o m a k e l o a d i n g o r u n -
l o a d i n g e a s i e r .
4. Hook
F o r s h o p p i n g b a g s .
5. Storage net o r closed housing
L o c a t i o n f o r t h e 6 C D c h a n g e r .
Page 118 of 314
VII
104
C H I L D S A F E T Y
Passenger air bag OFF
C I T R O Ë N o f f e r s a c o m p l e t e r a n g e o f r e c o m m e n d e d c h i l d s e a t s w h i c h a r e
secured using a three point seat belt :
Group 0: from birth to 10 kg
Group 0+: from birth to 13 kg
Groups 1, 2 and 3: from 9 to 36 kg
L1
" R Ö M E R
B a b y - S a f e P l u s "
I n s t a l l e d i n t h e
r e a r w a r d s - f a c i n g p o s i t i o n .
L2
"KIDDY Life"
T h e u s e o f t h e
r e s t r a i n i n g c u s h i o n i s c o m p u l s o r y for carrying
young children
( f r o m 9 t o 1 8 k g ) .
Groups 2 and 3: from 15 to 36 kg
L3
" R E C A R O S t a r t "
L4
" K L I P P A N O p t i m a " F r o m t h e a g e of 6 years
( a p p r o x i m a t e l y
2 2 k g ) , t h e b o o s t e r i s u s e d o n i t s o w n .
L5
" R Ö M E R K I D F I X "
C a n b e fi t t e d t o t h e v e h i c l e ’ s I S O F I X m o u n t i n g s .
T h e c h i l d i s r e s t r a i n e d b y t h e s e a t b e l t .
Page 119 of 314
VII
104
C H I L D S A F E T Y
Passenger air bag OFF
C I T R O Ë N o f f e r s a c o m p l e t e r a n g e o f r e c o m m e n d e d c h i l d s e a t s w h i c h a r e
secured using a three point seat belt :
Group 0: from birth to 10 kg
Group 0+: from birth to 13 kg
Groups 1, 2 and 3: from 9 to 36 kg
L1
" R Ö M E R
B a b y - S a f e P l u s "
I n s t a l l e d i n t h e
r e a r w a r d s - f a c i n g p o s i t i o n .
L2
"KIDDY Life"
T h e u s e o f t h e
r e s t r a i n i n g c u s h i o n i s c o m p u l s o r y for carrying
young children
( f r o m 9 t o 1 8 k g ) .
Groups 2 and 3: from 15 to 36 kg
L3
" R E C A R O S t a r t "
L4
" K L I P P A N O p t i m a " F r o m t h e a g e of 6 years
( a p p r o x i m a t e l y
2 2 k g ) , t h e b o o s t e r i s u s e d o n i t s o w n .
L5
" R Ö M E R K I D F I X "
C a n b e fi t t e d t o t h e v e h i c l e ’ s I S O F I X m o u n t i n g s .
T h e c h i l d i s r e s t r a i n e d b y t h e s e a t b e l t .
Page 120 of 314
VII
105
C H I L D S A F E T Y
POSITIONS FOR CHILD SEATS SECURED USING THE SEAT BELT
I n c o n f o r m i t y w i t h E u r o p e a n l a w , t h i s t a b l e s h o w s y o u t h e p o s s i b i l i t i e s f o r t h e i n s t a l l a t i o n o f u n i v e r s a l l y a p p r o v e d c h i l d
s e a t s ( a ) u s i n g a s e a t b e l t , d e p e n d i n g o n t h e w e i g h t o f t h e c h i l d a n d t h e s e a t i n g p o s i t i o n i n t h e v e h i c l e .
( a ) U n i v e r s a l c h i l d s e a t : c h i l d s e a t w h i c h c a n b e i n s t a l l e d i n a l l v e h i c l e s u s i n g t h e s e a t b e l t .
( b ) C o n s u l t t h e c u r r e n t l e g i s l a t i o n f o r y o u r c o u n t r y b e f o r e d r i v i n g w i t h y o u r c h i l d i n t h i s s e a t .
( c ) G r o u p 0 : f r o m b i r t h t o 1 0 k g . S h e l l s a n d " c a r c o t s " c a n n o t b e i n s t a l l e d o n t h e f r o n t p a s s e n g e r s e a t .
U: s e a t p o s i t i o n s u i t a b l e f o r i n s t a l l a t i o n o f u n i v e r s a l l y a p p r o v e d r e a r w a r d s - f a c i n g a n d / o r f o r w a r d s - f a c i n g c h i l d s e a t .
U (R): As U , w i t h t h e v e h i c l e s e a t , w h i c h m u s t b e a d j u s t e d t o t h e h i g h e s t p o s i t i o n .
Seat position(s)
Weight of child
G r o u p s 0 ( c ) and 0+
< 13 kg G r o u p 1
9 to 18 kg G r o u p 2
15 to 25 kg G r o u p 3
22 to 36 kg
R o w 1 F r o n t p a s s e n g e r ( b )
w i t h h e i g h t a d j u s t m e n t
U (R )
U (R) U (R) U (R)
F r o n t p a s s e n g e r ( b ) w i t h o u t h e i g h t a d j u s t m e n t
U U U U
R o w 2 O u t e r r e a r
U U U U
C e n t r e r e a r
U U U U
Page 145 of 314
IX
!
127
D R I V I N G
Dynamic emergency braking
In the event of a failure of the vehi-
cle’s main braking system or in an
exceptional situation (e.g. driver taken
ill, under instruction, etc) pull and
hold control A to stop the vehicle.
The electronic stability programme
( E S P ) p r o v i d e s s t a b i l i t y d u r i n g d y -
namic emergency braking.
If the dynamic emergency braking
malfunctions, one of the following
messages will be displayed on the
instrument panel display:
- "Parking brake faulty".
- "Parking brake control faulty". I f a f a i l u r e o f t h e E S P s y s -
tem is signalled by the light-
ing of this warning lamp,
then braking stability is not
guaranteed. In this event, stability
must be assured by the driver by
repeating alternate "pull release" ac-
tions on control A .
The dynamic emergency
braking must only be used in
exceptional circumstances. Emergency parking brake
release
In the event of the electric parking
brake failing to release, an emer-
gency device can be used to release
the parking brake manually, provid-
ed that it is possible to immobilise
the vehicle while the procedure is
carried out.
If you can start the vehicle: with
the engine running, immobilise
the vehicle by applying the foot
brake while the operation is be-
ing carried out.
If you are unable to start the ve-
h i c l e ( fl a t b a t t e r y f o r e x a m p l e ) : d o
not use this device and contact
a CITROËN dealer. However, if
y o u a r e o b l i g e d t o p r o c e e d , fi r s t
immobilise your vehicle securely
and then follow the instructions
below.